ExamPass EngineeringExamPass Engineering Start free
Free tool · For FE retakers

Failed the FE? Turn your diagnostic report into study priorities

If you did not pass, NCEES sent you a diagnostic report: a score from 0 to 15 for every knowledge area and a bar comparing you with the examinees who passed. Upload the PDF (or copy it in) and see which areas to study first and how to split your time — weighted by how many questions each area is worth.

1 Upload your report, or pick your FE exam

Or choose your discipline and type it in:

Choose your discipline to load its knowledge areas.

How to read your FE diagnostic report

NCEES gives a diagnostic report to every examinee who does not pass. It has one row per knowledge area of your discipline and three things in each row.

Number of Items

How many questions from that area were on your exam. Areas with more items have more points to recover, which is why a moderate gap in a large area can matter more than a big gap in a small one.

Your Performance (0–15)

Your result in the area, converted to a common scale so different exam forms and different attempts can be compared. It is not a percentage and does not tell you how many questions you got right.

The comparison bar

A dashed line marks the average of passing examinees and a solid line marks you. The bar is not drawn to scale: it shows direction and rough size, which is why the analyzer asks for four levels instead of a number.

NCEES's own guidance is that areas significantly below passing examinees contributed to the failing result and need substantial study, while areas near or just above the average can still be improved. You can see their annotated example in the NCEES sample diagnostic report.

What to do after failing the FE exam

The diagnostic report is the most specific feedback NCEES gives you about your attempt. Use it before you open a single textbook, so the next round of study goes where your NCEES exam results say it should.

  1. Get your report from MyNCEES. NCEES emails you when results are ready, typically 7 to 10 days after the exam. The diagnostic report comes only with a failing result.
  2. Read it area by area. Note the number of items, your 0–15 score and where your bar sits against passing examinees. The analyzer above does the weighting for you.
  3. Decide whether it was knowledge or pace. Several areas well below the average point to content gaps. Every area near the average usually means you were close, and timed full-length practice matters more than new content.
  4. Check when you can retake. NCEES allows one attempt per testing window and at most three in 12 months. Your state board can be stricter, and some ask for a new application first.
  5. Measure again before you rebook. A practice exam in the real interface shows whether your weakest areas have moved, before you spend another exam fee finding out.

Timing and retake rules from the NCEES Examinee Guide (May 2026). Confirm the rules for your jurisdiction with your licensing board.

How the analyzer ranks your areas

Each area gets a weight: its number of items multiplied by 1 if your bar is well below passing examinees, 0.5 if it is a little below, 0.15 if it is at or a little above, and 0.05 if it is well above. Your study time is split in proportion to those weights, and ties go to the area with the lower score.

Multiplying by the number of items follows the reasoning in the NCEES example: a smaller gap across 26 questions can be worth more study than a larger gap across 18. Areas at the average still get some time, because they are points you cannot afford to give back.

Frequently asked questions

When and where do I get my FE diagnostic report?

NCEES emails you when your result is ready, typically 7 to 10 days after the exam, and you view it in your MyNCEES account. The diagnostic report comes only with a failing result. For some state boards the result is released through the board first, which typically takes 8 to 10 weeks.

How soon can I retake the FE exam?

NCEES policy allows one attempt per testing window and no more than three attempts in any 12-month period. Your licensing board can be stricter, and some require a new application before you can register again, so check with your board before booking.

What does the 0–15 score on the FE diagnostic report mean?

It is your result in each knowledge area converted to a common scale from 0 to 15. NCEES converts it because every exam form is different; the scale lets you compare areas and compare attempts. It is not a percentage and not a count of correct answers.

Can I work out how many questions I got right?

No. NCEES states that the number of questions you answered correctly cannot be determined from the scaled score. Any tool that claims to recover your raw score is guessing.

What is the passing score for the FE exam?

NCEES does not publish one, and the diagnostic report cannot be used to determine it. What the report does give you is a comparison with the average of passing examinees in each area, which is what this analyzer uses.

Why might the item counts here differ from my report?

We pre-fill each area with the weight in the published NCEES specification. Each exam form varies a little and the specification gives ranges, so your report may show a slightly different number. Type the number from your report: it is the one that counts.

Is my report stored or sent anywhere?

No. The analysis runs entirely in your browser, and so does reading your PDF if you upload one: the file is opened on your device and never sent to us. What you enter is kept only in this browser so you do not lose it on a reload, and the Clear button deletes it.

Can I upload my diagnostic report instead of typing it?

Yes. Upload the PDF you downloaded from MyNCEES and the analyzer fills in every area: the number of items and your score are read exactly from the PDF, and the level of each bar is measured from its drawing. A bar counts as well below or well above when your line covers more than half the distance from the dashed line to the end of the bar. Rows close to that cut are marked so you can decide, and nothing is analyzed until you have checked the rows against your report. A scanned or photographed report has no readable text, so for those you type the numbers.

Knowledge areas and weights by discipline