ExamPass EngineeringExamPass Engineering Start free
FE Electrical and Computer · Knowledge area 9 of 17

Communications on the FE Electrical and Computer exam

Communications accounts for 6 of the 110 questions — 5.5% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions6
Share of exam5.5%
Rank by weight9/17
In our bank20

What Communications covers

On the FE Electrical and Computer exam this area covers analogue and digital modulation, bandwidth and signal-to-noise ratio, channel capacity, multiplexing, noise, and error detection and correction.

What the questions look like: A bandwidth requirement, a channel capacity from Shannon’s relationship, or a modulation property.

Worth knowing cold: Most of this area is substitution into a handful of relationships. Knowing which one applies is the whole task.

3 free Communications practice problems

These come from our FE Electrical and Computer bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A high-speed microwave digital communications channel has an allocated transmission bandwidth of $B = 5.0\text{ MHz}$ corrupted by additive white Gaussian noise (AWGN). According to the Shannon-Hartley theorem, what minimum signal-to-noise ratio in decibels ($SNR_{dB}$) is theoretically required to support an error-free data transmission throughput of $R = 25.0\text{ Mbps}$?

  1. A14.9 dBcorrect
  2. B18.2 dB
  3. C21.5 dB
  4. D24.8 dB
Show the solution

**Step 1: State the Shannon-Hartley Channel Capacity Theorem** From the FE Reference Handbook (Communications / Channel Capacity): $$C = B \log_2(1 + SNR)$$ where: - $C$ is channel capacity in bits per second (bps) - $B$ is channel bandwidth in Hertz (Hz) - $SNR$ is linear power signal-to-noise ratio ($S/N$) **Step 2: Solve for Minimum Required Linear SNR** To reliably transmit at $R = 25.0\text{ Mbps} = 25.0 \times 10^6\text{ bps}$ over $B = 5.0\text{ MHz} = 5.0 \times 10^6\text{ Hz}$: $$C \ge R$$ $$5.0 \times 10^6 \log_2(1 + SNR) \ge 25.0 \times 10^6$$ $$\log_2(1 + SNR) \ge \frac{25.0 \times 10^6}{5.0 \times 10^6} = 5.0$$ Converting from base 2 logarithm: $$1 + SNR \ge 2^{5.0} = 32.0$$ $$SNR \ge 32.0 - 1 = 31.0$$ **Step 3: Convert SNR to Decibels (dB)** $$SNR_{dB} = 10 \log_{10}(SNR) = 10 \log_{10}(31.0)$$ $$\log_{10}(31.0) = 1.49136$$ $$SNR_{dB} = 10 \times 1.49136 = 14.914\text{ dB} \approx 14.9\text{ dB}$$ Conclusion: The minimum required signal-to-noise ratio is **14.9 dB**. Distractor Analysis: - Option A: Correct. Solves Shannon capacity C = B * log2(1 + SNR) for SNR = 30.62 (14.9 dB). - Option B: Uses natural logarithm ln instead of base-2 logarithm log2. - Option C: Neglects noise bandwidth factor, scaling SNR by 2. - Option D: Calculates SNR required for double channel capacity.

Problem 2

A digital communication system employs coherent Binary Phase Shift Keying (BPSK) modulation over an additive white Gaussian noise (AWGN) channel. The bit error probability is governed by $P_b = Q\left(\sqrt{\frac{2 E_b}{N_0}}\right)$. If the system design specifies a maximum permissible bit error rate of $P_b = 1.00 \times 10^{-5}$, what is the required bit energy to noise power spectral density ratio $(E_b / N_0)$ in decibels (dB)?

Show the solution

**Step 1: Relate Bit Error Rate to Standard Gaussian Q-Function** From the FE Reference Handbook (Communications / Digital Modulation): For coherent BPSK: $$P_b = Q\left(\sqrt{\frac{2 E_b}{N_0}}\right) = 1.00 \times 10^{-5}$$ **Step 2: Invert the Q-Function** From the Standard Normal Cumulative Distribution / $Q$-function table: $$Q(x) = 1.00 \times 10^{-5} \implies x \approx 4.265$$ Therefore: $$\sqrt{\frac{2 E_b}{N_0}} = 4.265$$ **Step 3: Solve for Linear $E_b / N_0$** $$\frac{2 E_b}{N_0} = (4.265)^2 = 18.190$$ $$\frac{E_b}{N_0} = \frac{18.190}{2} = 9.095$$ **Step 4: Convert to Decibels** $$\left(\frac{E_b}{N_0}\right)_{\text{dB}} = 10 \log_{10}(9.095) = 10(0.9588) = 9.588\text{ dB} \approx 9.6\text{ dB}$$ Conclusion: The required $(E_b / N_0)$ is **9.6 dB**.

Problem 3

A digital communications system operates over a transmission bandwidth of $B = 5.00\text{ MHz}$ using $64\text{-QAM}$ modulation ($M = 64$) and a raised-cosine pulse-shaping filter with roll-off factor $\alpha = 0.25$. What is the resulting gross bit rate $R_b$ transmitted across the channel in megabits per second (Mbps)? Enter your answer rounded to one decimal place (e.g., 24.0).

Show the solution

**Step 1: Calculate Maximum Symbol Rate $R_s$** From the FE Reference Handbook (Communications / Digital Modulation / Raised-Cosine Filtering): The transmission bandwidth $B$ for a raised-cosine pulse is: $$B = R_s (1 + \alpha)$$ Solving for the baud (symbol) rate $R_s$: $$R_s = \frac{B}{1 + \alpha} = \frac{5.00\text{ MHz}}{1 + 0.25} = \frac{5.00}{1.25} = 4.00\text{ Mbaud} = 4.00 \times 10^6\text{ symbols/s}$$ **Step 2: Determine Bits Per Symbol $k$ for 64-QAM** For $M = 64$ constellation points: $$k = \log_2(M) = \log_2(64) = 6\text{ bits/symbol}$$ **Step 3: Calculate Gross Bit Rate $R_b$** $$R_b = k \times R_s = (6\text{ bits/symbol}) \times (4.00 \times 10^6\text{ symbols/s}) = 24.00 \times 10^6\text{ bps} = 24.00\text{ Mbps}$$ Conclusion: The gross bit rate is **$24.0\text{ Mbps}$**.

Find out where you actually stand

A free 20-question diagnostic across every FE Electrical and Computer knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Communications is where your time should go at all.

Start the free Electrical & Computer diagnostic

Retaking the FE Electrical and Computer exam?

Copy the scores from your NCEES diagnostic report and see whether Communications is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Electrical and Computer knowledge areas