ExamPass EngineeringExamPass Engineering Start free
FE Electrical and Computer · Knowledge area 14 of 17

Properties of Electrical Materials on the FE Electrical and Computer exam

Properties of Electrical Materials accounts for 4 of the 110 questions — 3.6% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions4
Share of exam3.6%
Rank by weight14/17
In our bank15

What Properties of Electrical Materials covers

On the FE Electrical and Computer exam this area covers conductors, semiconductors and insulators, resistivity and conductivity, dielectric and magnetic properties, doping and carrier behaviour, and temperature effects.

What the questions look like: A resistivity or conductance computation, or a property comparison between material classes.

Worth knowing cold: Link the macroscopic property back to carriers and band structure; it makes the comparison questions straightforward.

3 free Properties of Electrical Materials practice problems

These come from our FE Electrical and Computer bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A monocrystalline silicon sample at room temperature ($T = 300\text{ K}$) is uniformly doped with phosphorus donor impurities at a concentration of $N_D = 2.0 \times 10^{16}\text{ cm}^{-3}$. Assume all donor atoms are ionized, the intrinsic carrier concentration is $n_i = 1.5 \times 10^{10}\text{ cm}^{-3}$, and electron mobility is $\mu_n = 1{,}200\text{ cm}^2/(\text{V}\cdot\text{s})$. Given the elementary charge $q = 1.602 \times 10^{-19}\text{ C}$, what is the electrical resistivity $\rho$ of this silicon sample in ohm-centimeters (Ω·cm), and what is the Hall coefficient $R_H$ in cubic centimeters per coulomb (cm³/C)?

  1. A0.145 Ω·cm (with Hall coefficient RH = -185 cm³/C)
  2. B0.260 Ω·cm (with Hall coefficient RH = -312 cm³/C)correct
  3. C0.420 Ω·cm (with Hall coefficient RH = -450 cm³/C)
  4. D0.585 Ω·cm (with Hall coefficient RH = -620 cm³/C)
Show the solution

**Step 1: Determine Equilibrium Majority Carrier Concentration** From the FE Reference Handbook (Properties of Electrical Materials / Semiconductors): For an n-type semiconductor with full donor ionization ($N_D \gg n_i$): $$n \approx N_D = 2.0 \times 10^{16}\text{ cm}^{-3}$$ The hole concentration is negligible: $p = n_i^2 / N_D = (1.5 \times 10^{10})^2 / (2.0 \times 10^{16}) = 1.125 \times 10^4\text{ cm}^{-3} \ll n$. **Step 2: Calculate Electrical Conductivity (σ) and Resistivity (ρ)** $$\sigma \approx q n \mu_n = (1.602 \times 10^{-19}\text{ C}) \times (2.0 \times 10^{16}\text{ cm}^{-3}) \times (1{,}200\text{ cm}^2/\text{V}\cdot\text{s})$$ $$\sigma = (3.204 \times 10^{-3}\text{ C/cm}^3) \times (1{,}200\text{ cm}^2/\text{V}\cdot\text{s}) = 3.8448\ (\Omega\cdot\text{cm})^{-1}$$ Electrical resistivity is the reciprocal of conductivity: $$\rho = \frac{1}{\sigma} = \frac{1}{3.8448\ (\Omega\cdot\text{cm})^{-1}} = 0.26009\ \Omega\cdot\text{cm} \approx 0.260\ \Omega\cdot\text{cm}$$ **Step 3: Calculate Hall Coefficient (R_H)** For an n-type semiconductor dominated by electrons: $$R_H = - \frac{1}{q n} = - \frac{1}{(1.602 \times 10^{-19}\text{ C}) \times (2.0 \times 10^{16}\text{ cm}^{-3})}$$ $$R_H = - \frac{1}{3.204 \times 10^{-3}\text{ C/cm}^3} = -312.11\text{ cm}^3/\text{C} \approx -312\text{ cm}^3/\text{C}$$ Conclusion: The resistivity is **0.260 Ω·cm** and the Hall coefficient is **-312 cm³/C**. Distractor Analysis: - Option A: with Hall coefficient RH = -185 cm³/C - Option B: with Hall coefficient RH = -312 cm³/C (Correct) - Option C: with Hall coefficient RH = -450 cm³/C - Option D: with Hall coefficient RH = -620 cm³/C

Problem 2

A rectangular silicon semiconductor sample has the following physical dimensions: - Thickness along magnetic field direction: $t = 0.500\text{ mm}$ - Width: $w = 2.00\text{ mm}$, Length: $L = 10.0\text{ mm}$ A longitudinal current of $I_x = 5.00\text{ mA}$ is passed through the sample while exposed to a uniform perpendicular magnetic flux density $B_z = 0.600\text{ T}$. The measured transverse Hall voltage is $V_H = -3.75\text{ mV}$. What is the majority carrier concentration $n$ in this semiconductor?

  1. A0.63 × 10^22 m^-3
  2. B1.00 × 10^22 m^-3correct
  3. C1.60 × 10^22 m^-3
  4. D2.50 × 10^22 m^-3
Show the solution

**Step 1: Calculate the Hall Coefficient $R_H$** From the FE Reference Handbook (Properties of Electrical Materials / Hall Effect): The transverse Hall voltage across a plate of thickness $t$ subjected to current $I_x$ and transverse magnetic field $B_z$ is: $$V_H = \frac{R_H I_x B_z}{t} \implies R_H = \frac{V_H t}{I_x B_z}$$ Substituting the given values: $$R_H = \frac{(-3.75 \times 10^{-3}\text{ V})(0.500 \times 10^{-3}\text{ m})}{(5.00 \times 10^{-3}\text{ A})(0.600\text{ T})} = \frac{-1.875 \times 10^{-6}}{3.00 \times 10^{-3}} = -6.25 \times 10^{-4}\text{ m}^3/\text{C}$$ The negative sign confirms that majority charge carriers are electrons (n-type material). **Step 2: Determine Majority Carrier Concentration $n$** The Hall coefficient relates to carrier concentration $n$ and elementary charge $q = 1.602 \times 10^{-19}\text{ C}$ by: $$|R_H| = \frac{1}{q n} \implies n = \frac{1}{q |R_H|}$$ $$n = \frac{1}{(1.602 \times 10^{-19}\text{ C})(6.25 \times 10^{-4}\text{ m}^3/\text{C})} = \frac{1}{1.00125 \times 10^{-22}} = 9.988 \times 10^{21}\text{ m}^{-3} \approx 1.00 \times 10^{22}\text{ m}^{-3}$$ In standard cgs units, this corresponds to $1.00 \times 10^{16}\text{ cm}^{-3}$. Conclusion: The carrier concentration is **$1.00 \times 10^{22}\text{ m}^{-3}$**. Distractor Analysis: - Option A: Uses longitudinal electric field instead of Hall transverse voltage. - Option B: Correct. Solves carrier density n = (I * B) / (q * t * V_H) = 1.00 x 10^22 m^-3. - Option C: Neglects thickness t of the semiconductor sample. - Option D: Applies electron charge magnitude incorrectly by factor of 2.5.

Problem 3

A cylindrical piezoelectric PZT sensor disc has diameter $D = 10.0\text{ mm}$ (radius $r = 5.00\text{ mm}$, cross-sectional area $A = 7.854 \times 10^{-5}\text{ m}^2$) and thickness $t = 2.00\text{ mm} = 2.00 \times 10^{-3}\text{ m}$. The material has piezoelectric longitudinal charge coefficient $d_{33} = 350.0\text{ pC/N}$ ($3.50 \times 10^{-10}\text{ C/N}$) and relative dielectric constant $\epsilon_r = 1{,}800$ (permittivity of free space $\epsilon_0 = 8.854 \times 10^{-12}\text{ F/m}$). A compressive axial force of $F = 500.0\text{ N}$ is applied normal to the disc faces. What is the open-circuit output voltage $V_{oc}$ generated across the sensor electrodes?

  1. A140 V (with 1 mm thickness)
  2. B280 V (with generated charge Q = 175 nC and capacitance C = 626 pF)correct
  3. C420 V (piezoelectric voltage with zero dielectric loading)
  4. D560 V (doubled force response)
Show the solution

**Step 1: Calculate Generated Piezoelectric Charge $Q$** From the FE Reference Handbook (Materials / Smart Materials / Piezoelectric Transducers): The total electric charge generated by direct piezoelectric action under axial force $F$ is: $$Q = d_{33} F = (350.0 \times 10^{-12}\text{ C/N}) \times (500.0\text{ N}) = 1.750 \times 10^{-7}\text{ C} = 175.0\text{ nC}$$ **Step 2: Calculate Sensor Electrical Capacitance $C$** The parallel-plate capacitance between the metallized electrode faces is: $$C = \frac{\epsilon_0 \epsilon_r A}{t}$$ $$C = \frac{(8.854 \times 10^{-12}\text{ F/m})(1{,}800)(7.854 \times 10^{-5}\text{ m}^2)}{2.00 \times 10^{-3}\text{ m}} = \frac{1.25171 \times 10^{-12}}{2.00 \times 10^{-3}} = 6.2585 \times 10^{-10}\text{ F} = 625.85\text{ pF}$$ **Step 3: Calculate Open-Circuit Voltage $V_{oc}$** $$V_{oc} = \frac{Q}{C} = \frac{1.750 \times 10^{-7}\text{ C}}{6.2585 \times 10^{-10}\text{ F}} = 279.62\text{ V} \approx 280\text{ V}$$ Alternative method via the piezoelectric voltage coefficient $g_{33} = \frac{d_{33}}{\epsilon_0 \epsilon_r}$: $$g_{33} = \frac{350.0 \times 10^{-12}}{(8.854 \times 10^{-12})(1800)} = 0.021961\text{ V}\cdot\text{m/N}$$ $$V_{oc} = g_{33} \sigma_{stress} t = g_{33} \left( \frac{F}{A} \right) t = 0.021961 \times \left( \frac{500.0}{7.854 \times 10^{-5}} \right) \times 2.00 \times 10^{-3} = 279.62\text{ V} \approx 280\text{ V}$$ Conclusion: The generated open-circuit voltage is **$280\text{ V}$**. Distractor Analysis: - Option A: with 1 mm thickness - Option B: with generated charge Q = 175 nC and capacitance C = 626 pF (Correct) - Option C: piezoelectric voltage with zero dielectric loading - Option D: doubled force response

Find out where you actually stand

A free 20-question diagnostic across every FE Electrical and Computer knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Properties of Electrical Materials is where your time should go at all.

Start the free Electrical & Computer diagnostic

Retaking the FE Electrical and Computer exam?

Copy the scores from your NCEES diagnostic report and see whether Properties of Electrical Materials is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Electrical and Computer knowledge areas