ExamPass EngineeringExamPass Engineering Start free
FE Electrical and Computer · Knowledge area 13 of 17

Ethics and Professional Practice on the FE Electrical and Computer exam

Ethics and Professional Practice accounts for 4 of the 110 questions — 3.6% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions4
Share of exam3.6%
Rank by weight13/17
In our bank17

What Ethics and Professional Practice covers

On the FE Electrical and Computer exam this area covers codes of ethics, licensure and professional registration, the engineer’s obligation to public health and safety, conflicts of interest, intellectual property, and professional liability.

What the questions look like: A short scenario with four plausible responses, where only one satisfies the engineer’s paramount duty to the public.

Worth knowing cold: When two answers both look defensible, the one that protects public safety wins. These questions are free points if you read them calmly.

3 free Ethics and Professional Practice practice problems

These come from our FE Electrical and Computer bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

Select the TWO (2) ethical obligations that strictly comply with the IEEE Code of Ethics and the NCEES Model Rules of Professional Conduct regarding public welfare, safety, and cybersecurity in engineering practice.

  1. AAn electrical engineer may temporarily bypass high-voltage safety interlocks on factory automation machinery during prototype commissioning without tagging out, provided oral notice is given to nearby technicians.
  2. BEngineers shall hold paramount the safety, health, and welfare of the public and promptly disclose factors that might endanger the public or the environment, including critical cybersecurity flaws in industrial control networks.
  3. CAn embedded systems engineer who changes employers may reuse proprietary, copyrighted cryptographic firmware libraries developed for their previous employer without written authorization, provided the new employer signs an internal non-disclosure agreement.
  4. DEngineers shall issue public statements only in an objective and truthful manner, and shall not accept compensation, financial or otherwise, from more than one party for services on the same project unless the circumstances are fully disclosed and agreed to by all interested parties.
Show the solution

**Step 1: Evaluate Statement A (Bypassing Safety Interlocks)** False. IEEE Code of Ethics § 1.1 and NCEES Model Rules § 240.15 require engineers to protect safety, health, and welfare. Bypassing high-voltage interlocks without formal Lockout/Tagout (LOTO) protocols directly violates OSHA standards and engineering ethics. Statement A describes an ethical and safety violation. **Step 2: Evaluate Statement B (Paramount Public Safety & Vulnerability Disclosure)** True. IEEE Code of Ethics § 1.1 mandates that members "hold paramount the safety, health, and welfare of the public, to strive to comply with ethical design and sustainable development practices, to protect the privacy of others, and to disclose promptly factors that might endanger the public or the environment." Critical cybersecurity vulnerabilities in SCADA/ICS fall under this mandate. Statement B is correct. **Step 3: Evaluate Statement C (Reusing Proprietary Firmware)** False. NCEES Model Rules § 240.15 (Employer/Client Relations) and IEEE Code of Ethics § 1.4 prohibit the unauthorized appropriation of proprietary intellectual property, trade secrets, and copyrighted source code from a former employer. Statement C describes intellectual property theft and breach of confidentiality. **Step 4: Evaluate Statement D (Objectivity and Conflict of Interest)** True. NCEES Model Rules § 240.15 (Obligation to Society & Conflict of Interest): Licensees shall be completely objective and truthful in all professional reports, statements, or testimony, and shall not accept compensation from multiple parties on the same project without full written disclosure and mutual agreement. Statement D is correct. Conclusion: The correct statements are **B and D**.

Problem 2

Regarding ethical conduct, vendor interactions, and concurrent professional practice under the NCEES Model Rules of Professional Conduct, which TWO of the following statements are correct?

  1. AEngineers may accept lavish vendor-sponsored entertainment trips if the vendor is currently bidding on an active contract that the engineer evaluates.
  2. BLicensees shall not accept financial or other valuable consideration from material or equipment suppliers for specifying their products without full written disclosure to the client.
  3. CAn engineer may certify and sign technical design calculations prepared by an external party without reviewing or understanding the mathematical methodology.
  4. DLicensees shall not undertake an assignment outside their areas of competence and shall not practice in any field until adequately qualified by education or experience.
Show the solution

**Step 1: Analyze Vendor Kickbacks and Product Specifying (Option B)** Under NCEES Model Rules Section 240.15 B.2: "Licensees shall not accept financial or other valuable consideration, directly or indirectly, from material or equipment suppliers for specifying their products." Accepting undisclosed vendor gratuities corrupts objective technical judgment. Therefore, Option B is **CORRECT**. **Step 2: Analyze Competence Boundaries (Option D)** Under NCEES Model Rules Section 240.15 A.3: "Licensees shall undertake assignments only when qualified by education or experience in the specific technical field of professional engineering involved." Therefore, Option D is **CORRECT**. **Step 3: Evaluate Distractors** - Option A is incorrect: Accepting gifts or trips from active bidders violates rules against bribery and unearned consideration (Section 240.15 C.1). - Option C is incorrect: Stamping or signing plans without personal supervisory control and competent review is prohibited "plan stamping" (Section 240.15 C.4). Conclusion: Correct options are **B and D**.

Problem 3

According to the NCEES Model Rules (Section 240.15: Rules of Professional Conduct — Licensee's Obligation to Employer and Clients), which TWO of the following statements regarding confidential proprietary information and professional integrity are correct?

  1. AA licensee shall not reveal facts, data, or proprietary information obtained in a professional capacity without the prior consent of the client or employer, except as authorized or required by law or the Model Rules.
  2. BA licensee who changes employers may immediately disclose and utilize confidential proprietary design algorithms developed for a former employer on new competitor projects without permission, provided no source code files are copied.
  3. CA licensee shall not accept employment from a new employer that involves using or disclosing trade secrets or proprietary technical data of a former employer without consent.
  4. DA licensee is completely released from confidentiality obligations towards a former client as soon as that client files for bankruptcy reorganization or changes corporate ownership.
Show the solution

**Step 1: Analyze NCEES Model Rules Section 240.15 (Client Confidentiality)** From the FE Reference Handbook (Ethics / NCEES Model Rules of Professional Conduct): - **Section 240.15(D)** states: *"Licensees shall not reveal facts, data, or information obtained in a professional capacity without the prior consent of the client or employer except as authorized or required by law."* $\implies$ **Statement A is correct.** - **Section 240.15(D)** further prohibits using trade secrets or proprietary data acquired during previous employment to benefit a subsequent employer or client without explicit written consent. $\implies$ **Statement C is correct.** **Step 2: Evaluate Distractors** - **Statement B is false**: Trade secrets and proprietary algorithms remain legally protected intellectual property regardless of whether physical files were copied. - **Statement D is false**: Deontological confidentiality obligations do not expire upon bankruptcy or corporate restructuring. Conclusion: Statements **A** and **C** are correct.

Find out where you actually stand

A free 20-question diagnostic across every FE Electrical and Computer knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Ethics and Professional Practice is where your time should go at all.

Start the free Electrical & Computer diagnostic

Retaking the FE Electrical and Computer exam?

Copy the scores from your NCEES diagnostic report and see whether Ethics and Professional Practice is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Electrical and Computer knowledge areas

Ethics and Professional Practice on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.