ExamPass EngineeringExamPass Engineering Start free
FE Industrial and Systems · Knowledge area 13 of 13

Ethics and Professional Practice on the FE Industrial and Systems exam

Ethics and Professional Practice accounts for 4 of the 110 questions — 3.6% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions4
Share of exam3.6%
Rank by weight13/13
In our bank15

What Ethics and Professional Practice covers

On the FE Industrial and Systems exam this area covers codes of ethics, licensure and professional registration, the engineer’s obligation to public health and safety, conflicts of interest, intellectual property, and professional liability.

What the questions look like: A short scenario with four plausible responses, where only one satisfies the engineer’s paramount duty to the public.

Worth knowing cold: When two answers both look defensible, the one that protects public safety wins. These questions are free points if you read them calmly.

3 free Ethics and Professional Practice practice problems

These come from our FE Industrial and Systems bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A licensed Professional Engineer (PE) serves as the lead industrial engineering manager for a large manufacturing enterprise. The engineer is evaluating competitive vendor bids for a multi-million-dollar automated material handling installation. According to the NCEES Model Rules (§ 240.15 Rules of Professional Conduct), which actions comply with the licensee ethical obligations?

  1. APromptly disclose in writing to employer executive management that their sibling owns a minority equity interest in one of the competing equipment vendors, and voluntarily recuse themselves from the vendor evaluation and selection committee.
  2. BAccept an all-expenses-paid weekend golf resort retreat sponsored by one of the bidding vendors to informally review technical equipment specifications prior to final contract award.
  3. CRefuse to sign or stamp facility engineering layouts prepared by an external contracting firm without having exercised direct supervisory control and complete technical review of all design calculations.
  4. DOffer a confidential percentage finder fee to the client procurement director to expedite contract review and favor their engineering division proposal.
Show the solution

**Evaluation of NCEES Model Rules (§ 240.15 Rules of Professional Conduct):** 1. **Statement A is COMPLIANT:** Under NCEES Model Rules § 240.15(C) (*Conflicts of Interest*), licensees must conscientiously avoid conflicts of interest. Licensees shall promptly disclose all known or potential conflicts of interest to their employers or clients in writing and recuse themselves from decisions where personal or familial financial interests could compromise independent professional judgment. 2. **Statement B is NON-COMPLIANT:** NCEES Model Rules § 240.15(C)(2) strictly prohibits licensees from accepting financial or other valuable considerations, directly or indirectly, from contractors, their agents, or other parties in connection with work for which the licensee is responsible. An all-expenses-paid resort trip constitutes an improper gift/inducement intended to influence professional impartiality. 3. **Statement C is COMPLIANT:** Under NCEES Model Rules § 240.15(B) (*Competence for Assignments*), licensees shall not sign or seal any engineering document unless they possess direct supervisory control and personal knowledge of all technical calculations and drawings. Stamping external third-party drawings without direct control is "plan stamping," a serious ethical and statutory violation. 4. **Statement D is NON-COMPLIANT:** NCEES Model Rules § 240.15(C)(3) explicitly forbids licensees from offering or paying, directly or indirectly, any commission, political contribution, gift, or other consideration to secure work or influence procurement decisions (anti-bribery and kickback prohibition). Correct choices are **A and C**.

Problem 2

A licensed Professional Engineer (PE) serving as a principal industrial systems consultant is preparing a competitive proposal for a municipal automated material handling and distribution facility. A member of the municipal selection board implies to the engineer that contributing $10,000 to the mayor's municipal campaign fund would substantially guarantee the award of the engineering design contract. According to the NCEES Model Rules of Professional Conduct, what is the mandatory ethical course of action for the engineer?

  1. AMake the donation if it is reported as an allowable political contribution under state campaign finance laws
  2. BOffer in-kind engineering services of equivalent value rather than a cash political donation
  3. CDecline the donation verbally but proceed with the proposal submission without reporting the solicitation
  4. DRefuse the solicitation unconditionally, as licensees shall not offer or pay any contribution or bribe to secure public contractscorrect
Show the solution

**Step 1: Review NCEES Model Rules on Public Solicitations and Bribery** From the NCEES Model Rules of Professional Conduct (Section 240.15 - Rules of Professional Conduct): - Licensees shall not offer, give, solicit, or receive, either directly or indirectly, any commission, gift, or other valuable consideration in order to secure work, and shall not make any political contribution in an amount intended to influence the award of a contract with a government body. - Specifically, paying money or valuable consideration to secure a public contract violates the bedrock principle that public awards must be based strictly on technical competence, qualifications, and fair competition. **Step 2: Evaluate the Options** - Option A is unethical and illegal: even if a political contribution is technically permitted under general election laws, giving it with the intent or implicit agreement to influence a public engineering contract award constitutes an illegal quid pro quo and violates NCEES ethical rules. - Option B is identical to bribery: exchanging in-kind engineering work for contract favor is strictly prohibited consideration. - Option C is unacceptable: simply declining verbally while ignoring the solicitation fails to uphold the integrity of the profession; in many jurisdictions, soliciting bribery must be formally reported. - Option D correctly states the unequivocal duty of the licensed engineer to refuse the solicitation unconditionally. Conclusion: The engineer must **refuse the solicitation unconditionally** (Option D).

Problem 3

A licensed Professional Engineer (PE) specializing in industrial ergonomics and packaging systems is employed by a manufacturing firm. Corporate management requests that the engineer review, sign, and apply their official professional seal to structural civil engineering blueprints for a dynamic concrete foundation supporting a 500-ton stamping forge hammer, avoiding the expense of retaining an outside licensed structural engineering consultant. According to the NSPE Code of Ethics for Engineers, what is the mandatory course of action for the engineer?

  1. ASign and seal the blueprints provided the manufacturing plant manager signs an internal liability waiver
  2. BRefuse to seal the drawings, as engineers shall undertake assignments only when qualified by education or experience in the specific technical fields involvedcorrect
  3. CSeal the drawings after conducting a cursory check of static soil bearing capacity tables
  4. DSeal the drawings provided a structural engineer reviews them informally without stamping
Show the solution

**Step 1: Analyze NSPE Code of Ethics on Competence and Stamping** From the FE Reference Handbook (Ethics / NSPE Code of Ethics): - **Fundamental Canon 2:** "Engineers shall perform services only in the areas of their competence." - **Rules of Practice Section II.2.a:** "Engineers shall undertake assignments only when qualified by education or experience in the specific technical fields involved." - **Rules of Practice Section II.2.b:** "Engineers shall not affix their signatures to any plans or documents dealing with subject matter in which they lack competence, nor to any plan or document not prepared under their direction and control." **Step 2: Professional Evaluation** Structural foundation design for dynamic impact machinery (such as a 500-ton forge press) requires specialized structural dynamics expertise. An industrial packaging engineer stamping such documents violates Canon 2 and exposes workers and the public to structural collapse hazards. Conclusion: The engineer must **refuse to seal the drawings, as engineers shall undertake assignments only when qualified by education or experience in the specific technical fields involved** (Option B).

Find out where you actually stand

A free 20-question diagnostic across every FE Industrial and Systems knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Ethics and Professional Practice is where your time should go at all.

Start the free Industrial & Systems diagnostic

Retaking the FE Industrial and Systems exam?

Copy the scores from your NCEES diagnostic report and see whether Ethics and Professional Practice is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Industrial and Systems knowledge areas

Ethics and Professional Practice on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.