ExamPass EngineeringExamPass Engineering Start free
FE Industrial and Systems · Knowledge area 8 of 13

Human Factors, Ergonomics, and Safety on the FE Industrial and Systems exam

Human Factors, Ergonomics, and Safety accounts for 9 of the 110 questions — 8.2% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions9
Share of exam8.2%
Rank by weight8/13
In our bank32

What Human Factors, Ergonomics, and Safety covers

On the FE Industrial and Systems exam this area covers human capabilities and limitations, anthropometry, workplace and workstation design, manual handling and lifting, environmental stressors, and occupational safety.

What the questions look like: A lifting limit, an anthropometric design decision, or a hazard control question.

Worth knowing cold: Design questions usually ask which percentile of the population to design for. That choice drives the answer.

3 free Human Factors, Ergonomics, and Safety practice problems

These come from our FE Industrial and Systems bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A worker lifts a box with the hand location 30 cm horizontally from the body (H), the lift starting at 75 cm vertical height (so V=75, which makes the vertical multiplier VM = 1.0), a vertical travel distance of 40 cm (D), and an asymmetry angle of 30° (A). Using the NIOSH lifting equation multipliers $HM = 25/H$, $VM = 1 - 0.003|V-75|$, $DM = 0.82 + 4.5/D$, $AM = 1 - 0.0032A$, with a load constant LC = 23 kg, a frequency multiplier FM = 0.85, and a coupling multiplier CM = 1.0, what is the Recommended Weight Limit (RWL)?

  1. A23.00 kg, using the load constant alone with no multipliers applied
  2. B19.55 kg, omitting the frequency multiplier FM entirely
  3. C13.73 kgcorrect
  4. D16.15 kg, using the asymmetry multiplier twice
Show the solution

The NIOSH lifting equation starts from an ideal load constant (23 kg, the maximum recommended weight under the best possible conditions) and multiplies it down by a series of factors, each penalizing one specific way the actual task departs from that ideal — so computing each multiplier correctly, and applying all of them, is the entire method. Horizontal multiplier: $HM = 25/30 = 0.833$. Vertical multiplier: since $V=75$ exactly matches the optimal height, $VM = 1 - 0.003(0) = 1.000$. Distance multiplier: $DM = 0.82 + 4.5/40 = 0.82+0.1125=0.933$. Asymmetry multiplier: $AM = 1-0.0032(30) = 1-0.096=0.904$. RWL: $23 \times 0.833 \times 1.000 \times 0.933 \times 0.904 \times 0.85 \times 1.0 = 13.73$ kg. This RWL is then compared against the actual load being lifted to compute a Lifting Index (LI = actual weight / RWL); an LI above 1.0 signals increased risk of low-back injury for a meaningful fraction of the working population, which is why this equation — not a single generic weight limit — is the standard tool for evaluating whether a specific manual lifting task needs redesign.

Problem 2

An industrial inspection workstation requires adequate task lighting for visual surface defect detection. A luminaire with a point-source luminous intensity of $I = 4{,}000\text{ cd}$ is mounted at a vertical ceiling height of $h = 2.0\text{ m}$ directly above an aisle, at a horizontal distance of $x = 1.5\text{ m}$ from the horizontal inspection table surface as depicted in the geometric diagram. Applying the Cosine Law of Illumination (Inverse-Square Law), calculate the illuminance E (in lux) arriving at the inspection task surface.

  1. A800 lux task illuminance (Neglecting cosine angular inclination)
  2. B640 lux task illuminance (Incident distance d = 2.0 m)
  3. C384 lux task illuminance (Assuming horizontal orientation)
  4. D512 lux task illuminance (Incident distance d = 2.50 m, cos theta = 0.80)correct
Show the solution

**Step 1: Calculate the Straight-Line Distance to the Task Surface (d)** From the Pythagorean theorem on the geometry: $$d = \sqrt{h^2 + x^2} = \sqrt{2.0^2 + 1.5^2} = \sqrt{4.0 + 2.25} = \sqrt{6.25} = 2.50\text{ m}$$ $$d^2 = (2.50\text{ m})^2 = 6.25\text{ m}^2$$ **Step 2: Determine the Angle of Incidence ($\theta$) and $\cos(\theta)$** The angle of incidence $\theta$ is the angle between the incident light ray and the surface normal (vertical axis): $$\cos \theta = \frac{h}{d} = \frac{2.0\text{ m}}{2.50\text{ m}} = 0.800$$ **Step 3: Apply the Cosine Law of Illumination** From the FE Reference Handbook (Ergonomics & Lighting / Photometry): $$E = \frac{I \cdot \cos \theta}{d^2}$$ Substituting the parameters: $$E = \frac{4{,}000\text{ cd} \times 0.800}{6.25\text{ m}^2} = \frac{3{,}200}{6.25} = 512.0\text{ lux}$$ **Step 4: Ergonomic Standard Conformance** The resulting illuminance of 512 lux satisfies IESNA and OSHA guidelines for medium electronic inspection and assembly tasks (recommended range: 500 to 1,000 lux). Conclusion: The illuminance is **512 lux** (Option D).

Problem 3

An industrial plant technician operates machinery in an acoustic environment with varying sound levels during an 8-hour shift. Exposure monitoring records the following noise durations: - $2.0\text{ hours}$ at $95.0\text{ dBA}$ - $3.0\text{ hours}$ at $90.0\text{ dBA}$ - $3.0\text{ hours}$ at $85.0\text{ dBA}$ In accordance with OSHA Permissible Exposure Limit (PEL) standards using a $5\text{ dB}$ exchange rate, the reference reference allowable duration is given by: $$T = \frac{8}{2^{(L - 90)/5}}$$ Calculate the total cumulative daily noise dose ($D$, as a percentage, e.g., 85.5):

Show the solution

Step 1: Calculate the allowable exposure duration ($T_i$) for each noise level under OSHA criteria: - For $L_1 = 95.0\text{ dBA}$: $$T_1 = \frac{8}{2^{(95 - 90)/5}} = \frac{8}{2^1} = 4.00\text{ hours}$$ - For $L_2 = 90.0\text{ dBA}$: $$T_2 = \frac{8}{2^{(90 - 90)/5}} = \frac{8}{2^0} = 8.00\text{ hours}$$ - For $L_3 = 85.0\text{ dBA}$: $$T_3 = \frac{8}{2^{(85 - 90)/5}} = \frac{8}{2^{-1}} = \frac{8}{0.50} = 16.00\text{ hours}$$ Step 2: Evaluate the cumulative noise dose ($D$) as a percentage: $$D = 100 \sum_{i=1}^n \frac{C_i}{T_i} = 100 \left( \frac{C_1}{T_1} + \frac{C_2}{T_2} + \frac{C_3}{T_3} \right)$$ $$D = 100 \left( \frac{2.00}{4.00} + \frac{3.00}{8.00} + \frac{3.00}{16.00} \right)$$ $$\frac{C_1}{T_1} = 0.5000$$ $$\frac{C_2}{T_2} = 0.3750$$ $$\frac{C_3}{T_3} = 0.1875$$ $$\sum \frac{C_i}{T_i} = 0.5000 + 0.3750 + 0.1875 = 1.0625$$ $$D = 100 \times 1.0625 = 106.25\% \approx 106.3\%$$ Because $D > 100\%$, the worker's exposure exceeds the OSHA daily PEL permissible limit. Distractor Analysis: - Omitting the $85\text{ dBA}$ component gives $87.5\%$ (failing to include non-PEL contributing levels under hearing conservation). - Using a $3\text{ dB}$ exchange rate (NIOSH) yields a significantly higher dose of $189\%$.

Find out where you actually stand

A free 20-question diagnostic across every FE Industrial and Systems knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Human Factors, Ergonomics, and Safety is where your time should go at all.

Start the free Industrial & Systems diagnostic

Retaking the FE Industrial and Systems exam?

Copy the scores from your NCEES diagnostic report and see whether Human Factors, Ergonomics, and Safety is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Industrial and Systems knowledge areas