ExamPass EngineeringExamPass Engineering Start free
FE Industrial and Systems · Knowledge area 5 of 13

Facilities and Supply Chain on the FE Industrial and Systems exam

Facilities and Supply Chain accounts for 10 of the 110 questions — 9.1% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions10
Share of exam9.1%
Rank by weight5/13
In our bank36

What Facilities and Supply Chain covers

On the FE Industrial and Systems exam this area covers facility location and layout, material handling, warehousing, inventory models and the economic order quantity, logistics and distribution, and supply chain coordination.

What the questions look like: An economic order quantity, a reorder point, or a layout or location decision.

Worth knowing cold: Inventory models are formula-driven and appear reliably. Know what each term in the EOQ represents.

3 free Facilities and Supply Chain practice problems

These come from our FE Industrial and Systems bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A distributor sells 18,000 units per year of an item. The ordering cost is $120 (USD) per order, and the annual holding cost is $4.50 (USD) per unit per year. Using the Economic Order Quantity formula $EOQ = \sqrt{\dfrac{2DS}{H}}$, what order quantity minimizes total inventory cost?

  1. A2,683 units, omitting the factor of 2 inside the square root
  2. B980 unitscorrect
  3. C69 units, inverting the formula and using H in the numerator instead of the denominator
  4. D1,386 units, using the holding cost per unit per month instead of per year (dividing H by 12 before applying the formula)
Show the solution

The EOQ formula finds the exact order size where the two competing costs of carrying inventory balance each other: ordering more often costs more in total ordering fees but less in holding cost (since average inventory on hand is lower), while ordering less often does the reverse, and the minimum total cost occurs exactly where these two costs trade off at the rate the square-root formula captures. Substituting $D=18{,}000$, $S=120$, $H=4.50$: $EOQ = \sqrt{\dfrac{2(18{,}000)(120)}{4.5}} = \sqrt{\dfrac{4{,}320{,}000}{4.5}} = \sqrt{960{,}000} = 979.8$, rounding to about 980 units. Ordering in batches smaller than this would mean paying the \$120 ordering cost too often relative to the inventory actually carried; ordering in larger batches would mean carrying more average inventory (and tying up more capital in holding cost) than the ordering-cost savings justify — the EOQ is the single quantity where neither of those two inefficiencies dominates the other.

Problem 2

A plant layout engineer needs to locate a centralized tool crib (x^*, y^*) to serve four manufacturing departments using the rectilinear (Manhattan) distance metric. The department coordinates and daily forklift trip frequencies w_i are: - Dept 1: (10, 20), w_1 = 30 trips/day - Dept 2: (30, 40), w_2 = 50 trips/day - Dept 3: (50, 10), w_3 = 40 trips/day - Dept 4: (70, 50), w_4 = 20 trips/day Using the median method, what is the optimal tool crib location and the resulting minimum total daily weighted rectilinear distance?

  1. A4200 m-trips/day at optimal coordinates (30, 20)correct
  2. B5100 m-trips/day at optimal coordinates (40, 30)
  3. C3800 m-trips/day at optimal coordinates (30, 30)
  4. D4650 m-trips/day at optimal coordinates (50, 20)
Show the solution

**Step 1: Total Weight and Median Threshold** Total weight $W = \sum w_i = 30 + 50 + 40 + 20 = 140\text{ trips/day}$. Median cutoff threshold: $$\frac{W}{2} = \frac{140}{2} = 70\text{ trips/day}$$ **Step 2: Determine Optimal X-Coordinate (x^*)** Sort departments in non-decreasing order of $x$-coordinates: 1. Dept 1: $x_1 = 10$, $w_1 = 30$, Cumulative weight $= 30 < 70$ 2. Dept 2: $x_2 = 30$, $w_2 = 50$, Cumulative weight $= 30 + 50 = 80 \ge 70$ Since cumulative weight reaches and exceeds 70 at $x = 30$: $$x^* = 30$$ **Step 3: Determine Optimal Y-Coordinate (y^*)** Sort departments in non-decreasing order of $y$-coordinates: 1. Dept 3: $y_3 = 10$, $w_3 = 40$, Cumulative weight $= 40 < 70$ 2. Dept 1: $y_1 = 20$, $w_1 = 30$, Cumulative weight $= 40 + 30 = 70 \ge 70$ Since cumulative weight reaches 70 at $y = 20$: $$y^* = 20$$ Optimal crib coordinates: $(x^*, y^*) = (30, 20)$. **Step 4: Compute Total Minisum Rectilinear Distance** $$f(x^*, y^*) = \sum_{i=1}^4 w_i \left( |x^* - x_i| + |y^* - y_i| \right)$$ - Dept 1: $30 \times (|30 - 10| + |20 - 20|) = 30 \times (20 + 0) = 600$ - Dept 2: $50 \times (|30 - 30| + |20 - 40|) = 50 \times (0 + 20) = 1{,}000$ - Dept 3: $40 \times (|30 - 50| + |20 - 10|) = 40 \times (20 + 10) = 40 \times 30 = 1{,}200$ - Dept 4: $20 \times (|30 - 70| + |20 - 50|) = 20 \times (40 + 30) = 20 \times 70 = 1{,}400$ $$\text{Total Distance} = 600 + 1{,}000 + 1{,}200 + 1{,}400 = 4{,}200\text{ m-trips/day}$$ Conclusion: The optimal location is $(30, 20)$ with total distance **4,200 m-trips/day**.

Problem 3

A distribution center manages inventory for a critical spare motor assembly where both daily demand and replenishment lead time are statistically independent random variables: - Mean daily demand: $\bar{d} = 80.0\text{ units/day}$, standard deviation $\sigma_d = 12.0\text{ units/day}$ - Mean replenishment lead time: $\bar{L} = 9.0\text{ days}$, standard deviation $\sigma_L = 2.0\text{ days}$ For a target cycle service level of 95% (standard normal factor z = 1.645), calculate the required Reorder Point (ROP in units) using the complete variance-of-lead-time-demand equation: ROP = d̄·L̄ + z·√(L̄·σ_d² + d̄²·σ_L²). (Round to the nearest integer).

Show the solution

**Step 1: Compute Expected Demand During Lead Time** From the FE Reference Handbook (Supply Chain Management / Stochastic Inventory Models): $$\mu_{DL} = \bar{d} \cdot \bar{L} = 80.0\text{ units/day} \times 9.0\text{ days} = 720.0\text{ units}$$ **Step 2: Calculate Standard Deviation of Demand During Lead Time (σ_DL)** When both demand and lead time vary independently: $$\sigma_{DL} = \sqrt{\bar{L} \cdot \sigma_d^2 + \bar{d}^2 \cdot \sigma_L^2}$$ $$\bar{L} \cdot \sigma_d^2 = 9.0 \times (12.0)^2 = 9.0 \times 144.0 = 1{,}296.0$$ $$\bar{d}^2 \cdot \sigma_L^2 = (80.0)^2 \times (2.0)^2 = 6{,}400.0 \times 4.0 = 25{,}600.0$$ $$\sigma_{DL} = \sqrt{1{,}296.0 + 25{,}600.0} = \sqrt{26{,}896.0} = 164.0\text{ units}$$ **Step 3: Calculate Safety Stock (SS) and Reorder Point (ROP)** For 95% service level ($z = 1.645$): $$\text{SS} = z \cdot \sigma_{DL} = 1.645 \times 164.0 = 269.78\text{ units}$$ $$\text{ROP} = \mu_{DL} + \text{SS} = 720.0 + 269.78 = 989.78\text{ units} \approx 990\text{ units}$$ Conclusion: The required reorder point is **990 units**.

Find out where you actually stand

A free 20-question diagnostic across every FE Industrial and Systems knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Facilities and Supply Chain is where your time should go at all.

Start the free Industrial & Systems diagnostic

Retaking the FE Industrial and Systems exam?

Copy the scores from your NCEES diagnostic report and see whether Facilities and Supply Chain is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Industrial and Systems knowledge areas