ExamPass EngineeringExamPass Engineering Start free
FE Industrial and Systems · Knowledge area 9 of 13

Systems Engineering, Analysis, and Design on the FE Industrial and Systems exam

Systems Engineering, Analysis, and Design accounts for 9 of the 110 questions — 8.2% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions9
Share of exam8.2%
Rank by weight9/13
In our bank32

What Systems Engineering, Analysis, and Design covers

On the FE Industrial and Systems exam this area covers the systems life cycle, requirements analysis, functional decomposition, trade studies, risk management, verification and validation, and system integration.

What the questions look like: Identifying the correct life-cycle stage, a trade-study decision, or a requirements question.

Worth knowing cold: This area is vocabulary-heavy and computation-light. Learning the life-cycle stages in order covers much of it.

3 free Systems Engineering, Analysis, and Design practice problems

These come from our FE Industrial and Systems bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

Within the standard Systems Engineering V-Model life cycle for defense and aerospace systems, engineering teams conduct both system Verification and system Validation. Select all of the following statements that correctly characterize the technical and operational distinctions between Verification and Validation:

  1. AVerification evaluates whether the subsystem or system design satisfies all specified technical requirements, drawings, and interface control documents ("built the system right").
  2. BValidation determines whether the completed operational system satisfies the real-world operational mission, stakeholder objectives, and intended user needs in its actual operational environment ("built the right system").
  3. CVerification is conducted exclusively by end-user field operators after final equipment fielding, whereas validation is restricted to factory bench testing.
  4. DOperational Test and Evaluation (OT&E) and User Acceptance Testing (UAT) are primary methodological practices for system validation.
  5. EDemonstrating that a system passes 100% of its technical specification verification tests guarantees that the system will pass operational mission validation.
Show the solution

**Step 1: Core Principles of the Systems Engineering V-Model** From the FE Reference Handbook (Systems Engineering / Life Cycle Engineering): 1. **Verification ("Built the system right"):** - Confirms by examination, analysis, test, or demonstration that design specifications, interface control documents, and architectural requirements have been fulfilled. - Typically conducted incrementally during development in controlled laboratory and integration test environments. - Statement A is correct. 2. **Validation ("Built the right system"):** - Confirms that the integrated product satisfies its operational purpose in the hands of intended users under true operational stresses (e.g. weather, battlefield mud, electromagnetic noise). - Typical mechanisms include Operational Test and Evaluation (OT&E) and User Acceptance Testing (UAT). - Statements B and D are correct. **Step 2: Distractor Analysis** - Statement C is false: Verification occurs during development and manufacturing; validation evaluates operational deployment. - Statement E is false: A system can satisfy every blueprint specification (verification) and still fail in field operation (validation) if user ergonomics, unexpected environmental interactions, or flawed original requirements make it unusable. Correct choices: **A, B, and D**.

Problem 2

A systems reliability team conducts a Process Failure Mode and Effects Analysis (PFMEA) on an automated robotic welding cell. An initial assessment of a critical weld seam failure mode identifies the following ranking criteria on standard 1-to-10 scales: - Severity ranking: S = 8 (Potential loss of primary structural integrity) - Occurrence ranking: O = 5 (Occasional failures observed in 1 in 400 parts) - Detection ranking: D = 6 (Manual post-process ultrasonic inspection with moderate defect escape probability) The Risk Priority Number is calculated as RPN = S · O · D. The team implements an engineering redesign featuring an automated vision laser tracking sensor (reducing Occurrence to O = 2) and an inline automated acoustic weld bead monitor (improving Detection to D = 2). The potential failure mode severity remains S = 8. Calculate the initial RPN, the revised RPN after redesign, and the percentage reduction in risk priority number (%ΔRPN).

  1. A72.5% reduction in RPN (Initial RPN = 240, Revised RPN = 66)
  2. B92.0% reduction in RPN (Initial RPN = 240, Revised RPN = 19)
  3. C86.7% reduction in RPN (Initial RPN = 240, Revised RPN = 32)correct
  4. D65.0% reduction in RPN (Initial RPN = 240, Revised RPN = 84)
Show the solution

**Step 1: Calculate Initial Baseline RPN** By definition in Systems Engineering and Quality (AIAG/VDA FMEA standards): $$\text{RPN}_{initial} = S \times O \times D$$ Given $S = 8$, $O = 5$, and $D = 6$: $$\text{RPN}_{initial} = 8 \times 5 \times 6 = 240$$ **Step 2: Calculate Revised RPN Following Engineering Controls** Severity is inherent to the physical failure effect and cannot be modified without changing the end product design ($S = 8$). With the automated sensor tracking and inline acoustic monitoring: - New Occurrence: $O_{revised} = 2$ - New Detection: $D_{revised} = 2$ $$\text{RPN}_{revised} = S \times O_{revised} \times D_{revised} = 8 \times 2 \times 2 = 32$$ **Step 3: Calculate the Percentage Reduction in Risk Priority Number** $$\%\Delta\text{RPN} = \left( \frac{\text{RPN}_{initial} - \text{RPN}_{revised}}{\text{RPN}_{initial}} \right) \times 100\%$$ $$\%\Delta\text{RPN} = \left( \frac{240 - 32}{240} \right) \times 100\% = \left( \frac{208}{240} \right) \times 100\% = 0.86667 \times 100\% = 86.67\% \approx 86.7\%$$ Risk analysis: An RPN reduction from 240 to 32 drops the failure mode from high critical priority to low acceptable risk, safely below typical industrial action thresholds (RPN ≤ 100). Conclusion: Risk reduction is **86.7%** (Initial = 240, Revised = 32).

Problem 3

A critical automated packaging cell operates under three discrete health states: - State 1: Fully Operational (normal throughput) - State 2: Degraded Mode (reduced speed with minor alarms) - State 3: Failed / Maintenance Down The hourly transition probability matrix P is: $$P = \begin{pmatrix} 0.85 & 0.10 & 0.05 \\ 0.00 & 0.70 & 0.30 \\ 0.80 & 0.00 & 0.20 \end{pmatrix}$$ Assuming the Markov chain is irreducible and aperiodic, calculate the steady-state probability vector π = (π_1, π_2, π_3) and determine the long-run operational availability (A = π_1 + π_2) of the packaging cell.

  1. A94.2% long-run operational availability (pi1 = 0.780, pi2 = 0.162, pi3 = 0.058)
  2. B87.7% long-run operational availability (pi1 = 0.658, pi2 = 0.219, pi3 = 0.123)correct
  3. C78.5% long-run operational availability (pi1 = 0.550, pi2 = 0.235, pi3 = 0.215)
  4. D65.8% long-run operational availability (pi1 = 0.658, pi2 = 0.150, pi3 = 0.192)
Show the solution

**Step 1: Formulate the Steady-State System of Equations** From the FE Reference Handbook (Probability and Advanced Mathematics / Markov Processes): $$\boldsymbol{\pi} \mathbf{P} = \boldsymbol{\pi} \quad \text{and} \quad \sum_{j=1}^3 \pi_j = 1$$ Expanding by columns: 1. $\pi_1 = 0.85 \pi_1 + 0.80 \pi_3$ 2. $\pi_2 = 0.10 \pi_1 + 0.70 \pi_2$ 3. $\pi_3 = 0.05 \pi_1 + 0.30 \pi_2 + 0.20 \pi_3$ 4. $\pi_1 + \pi_2 + \pi_3 = 1$ **Step 2: Solve in Terms of π_1** From equation (1): $$\pi_1 - 0.85 \pi_1 = 0.80 \pi_3 \implies 0.15 \pi_1 = 0.80 \pi_3$$ $$\pi_3 = \frac{0.15}{0.80} \pi_1 = \frac{3}{16} \pi_1 = 0.1875 \pi_1$$ From equation (2): $$\pi_2 - 0.70 \pi_2 = 0.10 \pi_1 \implies 0.30 \pi_2 = 0.10 \pi_1$$ $$\pi_2 = \frac{0.10}{0.30} \pi_1 = \frac{1}{3} \pi_1 \approx 0.333333 \pi_1$$ **Step 3: Normalize Using Probability Constraint** $$\pi_1 + \pi_2 + \pi_3 = 1$$ $$\pi_1 + \frac{1}{3} \pi_1 + \frac{3}{16} \pi_1 = 1$$ Find the common denominator (48): $$\pi_1 \left( \frac{48 + 16 + 9}{48} \right) = \pi_1 \left( \frac{73}{48} \right) = 1$$ $$\pi_1 = \frac{48}{73} = 0.657534 \approx 0.658$$ $$\pi_2 = \frac{1}{3} \left( \frac{48}{73} \right) = \frac{16}{73} = 0.219178 \approx 0.219$$ $$\pi_3 = \frac{3}{16} \left( \frac{48}{73} \right) = \frac{9}{73} = 0.123288 \approx 0.123$$ **Step 4: Compute Long-Run Operational Availability** The cell is operational when in State 1 or State 2: $$A = \pi_1 + \pi_2 = \frac{48}{73} + \frac{16}{73} = \frac{64}{73} = 0.876712 \implies 87.7\%$$ Unavailability: $Q = \pi_3 = \frac{9}{73} = 12.33\%$. Conclusion: Long-run availability is **87.7% long-run operational availability (pi1 = 0.658, pi2 = 0.219, pi3 = 0.123)** (Option B).

Find out where you actually stand

A free 20-question diagnostic across every FE Industrial and Systems knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Systems Engineering, Analysis, and Design is where your time should go at all.

Start the free Industrial & Systems diagnostic

Retaking the FE Industrial and Systems exam?

Copy the scores from your NCEES diagnostic report and see whether Systems Engineering, Analysis, and Design is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Industrial and Systems knowledge areas