ExamPass EngineeringExamPass Engineering Start free
FE Other Disciplines · Knowledge area 5 of 14

Thermodynamics and Heat Transfer on the FE Other Disciplines exam

Thermodynamics and Heat Transfer accounts for 10 of the 110 questions — 9.1% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions10
Share of exam9.1%
Rank by weight5/14
In our bank34

What Thermodynamics and Heat Transfer covers

On the FE Other Disciplines exam this area covers the first and second laws, properties of pure substances, power and refrigeration cycles, and conduction, convection and radiation heat transfer.

What the questions look like: A cycle efficiency, an energy balance, or a one-dimensional conduction or convection rate.

Worth knowing cold: Treat this as two areas with one weight. The thermodynamics half is property-table work; the heat transfer half is resistance networks.

3 free Thermodynamics and Heat Transfer practice problems

These come from our FE Other Disciplines bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

An industrial furnace wall has a unit cross-sectional area of $A = 1.00\text{ m}^2$ and consists of three material layers in series: - Layer 1 (inside refractory firebrick): thickness $L_1 = 0.120\text{ m}$, thermal conductivity $k_1 = 1.20\text{ W/(m}\cdot\text{K)}$ - Layer 2 (middle insulating blanket): thickness $L_2 = 0.080\text{ m}$, thermal conductivity $k_2 = 0.080\text{ W/(m}\cdot\text{K)}$ - Layer 3 (outside steel plate casing): thickness $L_3 = 0.010\text{ m}$, thermal conductivity $k_3 = 45.0\text{ W/(m}\cdot\text{K)}$ Hot combustion gas on the inside is at $T_{\infty,1} = 850.0^\circ\text{C}$ with internal convection coefficient $h_1 = 40.0\text{ W/(m}^2\cdot\text{K)}$. Ambient room air on the outside is at $T_{\infty,2} = 30.0^\circ\text{C}$ with external convection coefficient $h_2 = 10.0\text{ W/(m}^2\cdot\text{K)}$. What are the steady-state heat flux $q''$ and the outer steel casing surface temperature $T_{s,2}$?

  1. A669.3 W/m^2 (with outer casing surface temperature T_s2 = 96.9 °C)correct
  2. B334.6 W/m^2 (half heat flux error)
  3. C1,338.6 W/m^2 (neglecting insulation resistance)
  4. D820.0 W/m^2 (assuming total resistance R = 1.0 error)
Show the solution

**Step 1: Calculate Individual Thermal Resistances per Unit Area** From the FE Reference Handbook (Heat Transfer / Conduction & Convection in Composite Walls): The thermal network includes 2 convection and 3 conduction resistances in series: - Inside convection: $R''_{conv,1} = \frac{1}{h_1} = \frac{1}{40.0} = 0.0250\text{ K}\cdot\text{m}^2/\text{W}$ - Firebrick layer: $R''_{cond,1} = \frac{L_1}{k_1} = \frac{0.120}{1.20} = 0.1000\text{ K}\cdot\text{m}^2/\text{W}$ - Insulation layer: $R''_{cond,2} = \frac{L_2}{k_2} = \frac{0.080}{0.080} = 1.0000\text{ K}\cdot\text{m}^2/\text{W}$ - Steel casing: $R''_{cond,3} = \frac{L_3}{k_3} = \frac{0.010}{45.0} = 0.00022\text{ K}\cdot\text{m}^2/\text{W}$ - Outside convection: $R''_{conv,2} = \frac{1}{h_2} = \frac{1}{10.0} = 0.1000\text{ K}\cdot\text{m}^2/\text{W}$ **Step 2: Calculate Total Thermal Resistance and Heat Flux** $$R''_{total} = R''_{conv,1} + R''_{cond,1} + R''_{cond,2} + R''_{cond,3} + R''_{conv,2}$$ $$R''_{total} = 0.0250 + 0.1000 + 1.0000 + 0.00022 + 0.1000 = 1.22522\text{ K}\cdot\text{m}^2/\text{W}$$ The steady-state heat flux is: $$q'' = \frac{T_{\infty,1} - T_{\infty,2}}{R''_{total}} = \frac{850.0^\circ\text{C} - 30.0^\circ\text{C}}{1.22522\text{ K}\cdot\text{m}^2/\text{W}} = \frac{820.0}{1.22522} = 669.27\text{ W/m}^2 \approx 669.3\text{ W/m}^2$$ **Step 3: Determine Outer Surface Temperature $T_{s,2}$** Applying Newton's law of cooling across the outer convection boundary: $$q'' = h_2 (T_{s,2} - T_{\infty,2}) \implies T_{s,2} = T_{\infty,2} + \frac{q''}{h_2}$$ $$T_{s,2} = 30.0^\circ\text{C} + \frac{669.27\text{ W/m}^2}{10.0\text{ W/(m}^2\cdot\text{K)}} = 30.0 + 66.93 = 96.93^\circ\text{C} \approx 96.9^\circ\text{C}$$ Conclusion: The heat flux is **$669.3\text{ W/m}^2$** and the outer casing temperature is **$96.9^\circ\text{C}$**.

Problem 2

Composite plane wall (1 m^2): hot fluid T_inf1=200 C, h1=50.0 W/(m^2*K); steel layer L1=20.0 mm, k1=50.0 W/(m*K); insulation L2=60.0 mm, k2=0.050 W/(m*K); cold fluid T_inf2=20.0 C, h2=20.0 W/(m^2*K). Refer to diagram [FE-OTHER-467]. Steady-state heat flux q'' (W/m^2). Three significant figures.

Show the solution

Step 1 - Series thermal resistance per unit area: R_total = 1/h1 + L1/k1 + L2/k2 + 1/h2 Step 2 - Individual resistances: R_conv1 = 1/50.0 = 0.02000 m^2*K/W R_wall1 = 0.020/50.0 = 0.000400 m^2*K/W R_wall2 = 0.060/0.050 = 1.2000 m^2*K/W (insulation dominates) R_conv2 = 1/20.0 = 0.05000 m^2*K/W Step 3 - Total: R_total = 0.02000+0.00040+1.20000+0.05000 = 1.2704 m^2*K/W Step 4 - Heat flux: q'' = DeltaT/R_total = (200-20)/1.2704 = 180/1.2704 = 141.7 W/m^2 q'' = 142 W/m^2.

Problem 3

A building exterior plane wall consists of two solid layers in perfect thermal contact: an inner masonry brick layer A (thickness L_A = 0.12 m, thermal conductivity k_A = 0.80 W/(m·K)) and an outer rigid insulation layer B (thickness L_B = 0.05 m, thermal conductivity k_B = 0.040 W/(m·K)). The indoor air temperature is T_∞,i = 22.0°C with an interior convection coefficient h_i = 10.0 W/(m²·K). The outdoor air temperature is T_∞,o = -10.0°C with an exterior wind convection coefficient h_o = 25.0 W/(m²·K). Under steady-state 1D heat transfer conditions, the rate of heat loss per unit wall area (heat flux q") is most nearly:

  1. A36.4 W/m²
  2. B14.2 W/m²
  3. C20.8 W/m²correct
  4. D28.5 W/m²
Show the solution

**Step 1: Calculate the Total Thermal Resistance per Unit Area R''_tot** From the FE Reference Handbook (Heat Transfer / Conduction and Convection in Series): $$R''_{\text{tot}} = R''_{\text{conv},i} + R''_{\text{cond},A} + R''_{\text{cond},B} + R''_{\text{conv},o}$$ $$R''_{\text{conv},i} = \frac{1}{h_i} = \frac{1}{10.0} = 0.100 \text{ m}^2\cdot\text{K/W}$$ $$R''_{\text{cond},A} = \frac{L_A}{k_A} = \frac{0.12}{0.80} = 0.150 \text{ m}^2\cdot\text{K/W}$$ $$R''_{\text{cond},B} = \frac{L_B}{k_B} = \frac{0.05}{0.040} = 1.250 \text{ m}^2\cdot\text{K/W}$$ $$R''_{\text{conv},o} = \frac{1}{h_o} = \frac{1}{25.0} = 0.040 \text{ m}^2\cdot\text{K/W}$$ $$R''_{\text{tot}} = 0.100 + 0.150 + 1.250 + 0.040 = 1.540 \text{ m}^2\cdot\text{K/W}$$ **Step 2: Calculate Overall Temperature Difference ΔT** $$\Delta T = T_{\infty,i} - T_{\infty,o} = 22.0^\circ\text{C} - (-10.0^\circ\text{C}) = 32.0 \text{ K}$$ **Step 3: Calculate Heat Flux q"** $$q'' = \frac{\Delta T}{R''_{\text{tot}}} = \frac{32.0 \text{ K}}{1.540 \text{ m}^2\cdot\text{K/W}} = 20.7792 \text{ W/m}^2 \approx 20.8 \text{ W/m}^2$$ **Step 4: Distractor Analysis** - Option A ignores the interior and exterior film convective resistances ($R'' = 0.15 + 1.25 = 1.40 \implies q'' = 32 / 1.40 = 22.9\text{ W/m}^2$, or calculates with wrong thickness). - Option B miscalculates layer B resistance as $0.05 / 0.025 = 2.0$. - Option D uses $T_i - T_o = 22 - 10 = 12\text{ K}$ or omits insulation layer B. Conclusion: **20.8 W/m²** (Option C).

Find out where you actually stand

A free 20-question diagnostic across every FE Other Disciplines knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Thermodynamics and Heat Transfer is where your time should go at all.

Start the free Other Disciplines diagnostic

Retaking the FE Other Disciplines exam?

Copy the scores from your NCEES diagnostic report and see whether Thermodynamics and Heat Transfer is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Other Disciplines knowledge areas