ExamPass EngineeringExamPass Engineering Start free
FE Other Disciplines · Knowledge area 1 of 14

Fluid Mechanics on the FE Other Disciplines exam

Fluid Mechanics accounts for 13 of the 110 questions — 11.8% of your exam. It is one of the three heaviest areas on this paper, so it is worth your study time before almost anything else.

Questions13
Share of exam11.8%
Rank by weight1/14
In our bank44

What Fluid Mechanics covers

On the FE Other Disciplines exam this area covers fluid properties, hydrostatic pressure and forces on surfaces, buoyancy, the continuity and energy equations, the momentum equation, pipe friction and minor losses, and flow measurement.

What the questions look like: A pressure or force on a submerged surface, a head loss from the Darcy-Weisbach equation and a Moody-chart friction factor, or a velocity from Bernoulli.

Worth knowing cold: Check the Reynolds number before choosing a friction relationship. Laminar and turbulent answers differ by far more than rounding.

3 free Fluid Mechanics practice problems

These come from our FE Other Disciplines bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A horizontal commercial steel pipeline (equivalent sand roughness $\varepsilon = 0.045\text{ mm} = 4.5 \times 10^{-5}\text{ m}$) has an internal diameter of $D = 150.0\text{ mm} = 0.150\text{ m}$ and length $L = 250.0\text{ m}$. Water (density $\rho = 1000\text{ kg/m}^3$, kinematic viscosity $\nu = 1.00 \times 10^{-6}\text{ m}^2/\text{s}$) flows through the pipe at a volumetric discharge of $Q = 0.0530\text{ m}^3/\text{s} = 53.0\text{ L/s}$. Using the Swamee-Jain explicit approximation to the Colebrook equation: What are the Darcy friction factor $f$ and total friction head loss $h_f$?

  1. A0.0083 (half friction factor error)
  2. B0.0331 (double friction factor error)
  3. C0.0248 (smooth pipe assumption error)
  4. D0.0165 (with head loss h_f = 12.6 m and pressure drop Delta P = 124 kPa)correct
Show the solution

**Step 1: Compute Flow Velocity and Reynolds Number** From the FE Reference Handbook (Fluid Mechanics / Incompressible Flow / Darcy-Weisbach Equation): - Pipe cross-sectional area: $$A = \frac{\pi}{4} D^2 = \frac{\pi}{4} (0.150\text{ m})^2 = 0.017671\text{ m}^2$$ - Mean velocity: $$V = \frac{Q}{A} = \frac{0.0530\text{ m}^3/\text{s}}{0.017671\text{ m}^2} = 2.9993\text{ m/s} \approx 3.00\text{ m/s}$$ - Reynolds number: $$Re = \frac{V D}{\nu} = \frac{(3.00\text{ m/s})(0.150\text{ m})}{1.00 \times 10^{-6}\text{ m}^2/\text{s}} = 450{,}000 = 4.50 \times 10^5\quad (\text{Turbulent flow})$$ **Step 2: Determine Darcy Friction Factor $f$** - Relative roughness: $$\frac{\varepsilon}{D} = \frac{0.045\text{ mm}}{150.0\text{ mm}} = 0.000300$$ Using the Swamee-Jain equation: $$f = \frac{0.25}{\left[\log_{10}\left(\frac{\varepsilon / D}{3.7} + \frac{5.74}{Re^{0.9}}\right)\right]^2}$$ $$\frac{\varepsilon / D}{3.7} = \frac{0.000300}{3.7} = 8.1081 \times 10^{-5}$$ $$\frac{5.74}{Re^{0.9}} = \frac{5.74}{(450{,}000)^{0.9}} = \frac{5.74}{118{,}154} = 4.8581 \times 10^{-5}$$ $$\text{Sum} = 8.1081 \times 10^{-5} + 4.8581 \times 10^{-5} = 1.29662 \times 10^{-4}$$ $$\log_{10}(1.29662 \times 10^{-4}) = -3.88719$$ $$f = \frac{0.25}{(-3.88719)^2} = \frac{0.25}{15.1102} = 0.016545 \approx 0.0165$$ **Step 3: Calculate Head Loss $h_f$ and Pressure Drop $\Delta P$** $$h_f = f \frac{L}{D} \frac{V^2}{2g} = (0.016545) \times \frac{250.0\text{ m}}{0.150\text{ m}} \times \frac{(3.00\text{ m/s})^2}{2(9.81\text{ m/s}^2)} = (0.016545) \times 1666.67 \times 0.45872 = 12.648\text{ m} \approx 12.6\text{ m}$$ $$\Delta P = \rho g h_f = (1000\text{ kg/m}^3)(9.81\text{ m/s}^2)(12.648\text{ m}) = 124{,}077\text{ Pa} = 124.1\text{ kPa}$$ Conclusion: The friction factor is **$0.0165$** and head loss is **$12.6\text{ m}$**.

Problem 2

A water distribution piping network operates with a centrifugal pump whose head-discharge characteristic curve is given by: Hp = 50.0 - 1500 * Q^2 where Hp is the pump total dynamic head in meters (m) and Q is the volumetric flow rate in cubic meters per second (m^3/s). The piping system demand head curve is given by: Hs = 20.0 + 500 * Q^2 where Hs is the required system head in meters. Water density is rho = 1000 kg/m^3 and g = 9.81 m/s^2. Refer to the accompanying technical diagram [FE-OTHER-484]. What is the hydraulic water horsepower (power delivered to the fluid, in kW) produced by the pump at the operating duty point?

  1. A24.5 kW
  2. B41.8 kW
  3. C28.2 kW
  4. D33.0 kWcorrect
Show the solution

Step 1 - Find the Operating Duty Point $(Q_{\text{op}}, H_{\text{op}})$: The pump operates at the unique intersection of the pump characteristic performance curve and the piping system demand curve: $$H_p(Q) = H_s(Q)$$ $$50.0 - 1500 Q^2 = 20.0 + 500 Q^2$$ Rearranging like terms: $$50.0 - 20.0 = (1500 + 500) Q^2$$ $$30.0 = 2000 Q^2$$ $$Q^2 = \frac{30.0}{2000} = 0.01500\text{ m}^6\text{/s}^2$$ $$Q = \sqrt{0.01500} = 0.12247\text{ m}^3\text{/s} \quad (122.5\text{ L/s})$$ Step 2 - Operating Head: Substitute $Q^2 = 0.01500$ back into either curve: $$H_{\text{op}} = 20.0 + 500(0.01500) = 20.0 + 7.50 = 27.50\text{ m}$$ Check with pump curve: $$H_{\text{op}} = 50.0 - 1500(0.01500) = 50.0 - 22.50 = 27.50\text{ m (verified)}$$ Step 3 - Compute Hydraulic Power Delivered to Fluid ($P_h$): $$P_h = \rho g Q H_{\text{op}}$$ $$P_h = (1000\text{ kg/m}^3)(9.81\text{ m/s}^2)(0.12247\text{ m}^3\text{/s})(27.50\text{ m})$$ $$P_h = 33,039\text{ W} = 33.04\text{ kW}$$ Rounding to three significant figures gives 33.0 kW, matching Option D.

Problem 3

Select the TWO true statements regarding dimensionless numbers, fluid similitude, and boundary layer theory as defined in the FE Reference Handbook:

  1. ADynamic similitude between a prototype and a scale model in free-surface flows (such as spillways and ship hulls) requires equality of the Froude number: Fr = V / √(gL).
  2. BThe Reynolds number represents the ratio of pressure forces to gravitational forces acting upon a fluid element.
  3. CAccording to the Buckingham Pi Theorem, if a physical phenomenon involves n independent variables expressed in m fundamental dimensions, the relationship can be expressed by (n - m) independent dimensionless Pi terms.
  4. DFor laminar boundary layer flow along a smooth flat plate, the local boundary layer thickness δ grows linearly with distance x from the leading edge (δ ∝ x).
Show the solution

**Step 1: Evaluate Statement A** True. In free-surface flows governed primarily by gravitational and inertial forces (such as open-channel hydraulics, weirs, and naval hull wave resistance), dynamic similitude requires scaling based on the Froude number: $$\text{Fr} = \frac{V}{\sqrt{g L}}$$ **Step 2: Evaluate Statement B** False. The Reynolds number $\text{Re} = \frac{\rho V L}{\mu}$ represents the ratio of inertial forces to viscous shear forces, not pressure to gravity. The ratio of inertial to gravitational forces is the Froude number; the ratio of pressure to inertial forces is the Euler number. **Step 3: Evaluate Statement C** True. The Buckingham Pi Theorem states that an equation involving $n$ physical variables expressed in $m$ reference fundamental dimensions can be restructured into an equivalent relationship of $k = n - m$ independent dimensionless $\Pi$ parameters. **Step 4: Evaluate Statement D** False. In Blasius laminar boundary layer theory along a smooth flat plate, the boundary layer thickness $\delta$ grows proportional to the square root of distance $x$ from the leading edge: $$\delta(x) = \frac{5.0 x}{\sqrt{\text{Re}_x}} \propto \sqrt{x}$$ It does not grow linearly ($x^{1.0}$). Conclusion: **A and C** are the correct statements.

Find out where you actually stand

A free 20-question diagnostic across every FE Other Disciplines knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Fluid Mechanics is where your time should go at all.

Start the free Other Disciplines diagnostic

Retaking the FE Other Disciplines exam?

Copy the scores from your NCEES diagnostic report and see whether Fluid Mechanics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Other Disciplines knowledge areas

Fluid Mechanics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.