ExamPass EngineeringExamPass Engineering Start free
FE Other Disciplines · Knowledge area 8 of 14

Safety, Health, and Environment on the FE Other Disciplines exam

Safety, Health, and Environment accounts for 7 of the 110 questions — 6.4% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions7
Share of exam6.4%
Rank by weight8/14
In our bank24

What Safety, Health, and Environment covers

On the FE Other Disciplines exam this area covers hazard identification and risk assessment, process safety management, toxicology and exposure limits, fire and explosion hazards, relief systems, and environmental regulation.

What the questions look like: A hazard classification, an exposure or dilution computation, or a relief sizing question.

Worth knowing cold: Regulatory questions reward reading precisely. The distinction between two similar-sounding limits is often the whole question.

3 free Safety, Health, and Environment practice problems

These come from our FE Other Disciplines bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

An industrial technician working in a manufacturing facility is exposed to the following continuous noise sound pressure levels throughout an 8-hour shift: - $2.0\text{ hours}$ at $95.0\text{ dBA}$ - $3.0\text{ hours}$ at $90.0\text{ dBA}$ - $3.0\text{ hours}$ at $85.0\text{ dBA}$ Under OSHA occupational noise regulations (criterion level $L_c = 90\text{ dBA}$, 5 dB exchange rate, 8-hour reference baseline): What are the cumulative noise dose $D$ and the equivalent 8-hour Time-Weighted Average (TWA)?

  1. A53.1% (half dose calculation error)
  2. B87.5% (omitting the 85 dBA contribution)
  3. C106.3% (exceeds the 100% OSHA PEL, with 8-hour TWA = 90.4 dBA)correct
  4. D125.0% (using 3 dB exchange rate instead of OSHA 5 dB)
Show the solution

**Step 1: Determine Maximum Permissible Exposure Times** From the FE Reference Handbook (Safety, Health, and Environment / Noise Exposure / OSHA Regulations): The OSHA permissible exposure duration $T$ in hours for sound level $L$ (with a 5 dB exchange rate) is: $$T = \frac{8}{2^{(L - 90)/5}}$$ - For $L_1 = 95.0\text{ dBA}$: $T_1 = \frac{8}{2^{(95 - 90)/5}} = \frac{8}{2^1} = 4.00\text{ hours}$ - For $L_2 = 90.0\text{ dBA}$: $T_2 = \frac{8}{2^{(90 - 90)/5}} = \frac{8}{2^0} = 8.00\text{ hours}$ - For $L_3 = 85.0\text{ dBA}$: $T_3 = \frac{8}{2^{(85 - 90)/5}} = \frac{8}{2^{-1}} = 16.00\text{ hours}$ **Step 2: Calculate Noise Dose Percentage $D$** $$D = 100 \times \sum_{i=1}^{n} \frac{C_i}{T_i} = 100 \times \left(\frac{2.00}{4.00} + \frac{3.00}{8.00} + \frac{3.00}{16.00}\right)$$ $$D = 100 \times (0.5000 + 0.3750 + 0.1875) = 100 \times 1.0625 = 106.25\% \approx 106.3\%$$ Since $D = 106.3\% > 100\%$, the worker's exposure exceeds the OSHA Permissible Exposure Limit. **Step 3: Calculate 8-Hour Time-Weighted Average (TWA)** $$\text{TWA} = 90 + 16.61 \log_{10}\left(\frac{D}{100}\right) = 90 + 16.61 \log_{10}(1.0625)$$ $$\text{TWA} = 90 + 16.61 (0.026329) = 90 + 0.437 = 90.44\text{ dBA} \approx 90.4\text{ dBA}$$ Conclusion: The noise dose is **$106.3\%$** (exceeds PEL) with **$\text{TWA} = 90.4\text{ dBA}$**.

Problem 2

An industrial non-destructive testing facility uses an uncollimated Caesium-137 ($^{137}\text{Cs}$) sealed radioisotope gamma radiation source ($E_\gamma = 0.662\text{ MeV}$). At a designated worker monitoring station, the unshielded incident gamma radiation dose rate is measured as $\dot{D}_0 = 48.0\text{ mSv/h}$. Lead shielding sheets ($Pb, \rho = 11.34\text{ g/cm}^3$) having a linear attenuation coefficient $\mu = 1.150\text{ cm}^{-1}$ (half-value layer $\text{HVL} = 0.6027\text{ cm}$) are to be installed. What thickness of lead $x$ (in cm) is required to reduce the transmitted dose rate down to an occupational safe threshold of $\dot{D} = 1.50\text{ mSv/h}$?

  1. A1.81 cm (corresponding to 3 half-value layers)
  2. B2.41 cm (corresponding to 4 half-value layers)
  3. C3.01 cm (corresponding to 5 half-value layers)correct
  4. D3.62 cm (corresponding to 6 half-value layers)
Show the solution

Step 1: State the exponential narrow-beam radiation attenuation equation: $$\dot{D}(x) = \dot{D}_0 e^{-\mu x}$$ where: - $\dot{D}_0 = 48.0\text{ mSv/h}$ (initial unshielded dose rate) - $\dot{D} = 1.50\text{ mSv/h}$ (permissible attenuated dose rate) - $\mu = 1.150\text{ cm}^{-1}$ (linear attenuation coefficient) Step 2: Calculate the required dose reduction attenuation factor: $$\frac{\dot{D}}{\dot{D}_0} = \frac{1.50\text{ mSv/h}}{48.0\text{ mSv/h}} = \frac{1}{32.0} = 0.03125$$ Step 3: Solve for thickness $x$ using the exponential relation: $$e^{-\mu x} = \frac{1}{32.0}$$ $$-\mu x = \ln\left( \frac{1}{32.0} \right) = -\ln(32.0) = -3.46574$$ $$x = \frac{3.46574}{\mu} = \frac{3.46574}{1.150\text{ cm}^{-1}} = 3.0137\text{ cm} \approx 3.01\text{ cm}$$ Step 4: Verify using Half-Value Layers (HVL): $$\text{HVL} = \frac{\ln 2}{\mu} = \frac{0.69315}{1.150\text{ cm}^{-1}} = 0.60274\text{ cm}$$ $$n = \frac{\ln(32)}{\ln(2)} = 5.0\text{ half-value layers}$$ $$x = n \times \text{HVL} = 5.0 \times 0.60274\text{ cm} = 3.0137\text{ cm} \approx 3.01\text{ cm}$$ Therefore, the required lead shield thickness is 3.01 cm (option C).

Problem 3

In a manufacturing facility, three independent process machines operate simultaneously adjacent to a technician inspection station. The individual A-weighted sound pressure levels measured for each machine operating alone are: • Machine 1: L₁ = 84.0 dBA • Machine 2: L₂ = 87.0 dBA • Machine 3: L₃ = 82.0 dBA The combined total sound pressure level L_total at the workstation is most nearly:

  1. A87.3 dBA
  2. B89.6 dBAcorrect
  3. C92.1 dBA
  4. D84.3 dBA
Show the solution

**Step 1: Apply Decibel Addition Formulation** From the FE Reference Handbook (Safety / Industrial Hygiene — Sound Level Addition): Because decibels represent logarithmic acoustic power ratios, decibel levels cannot be added linearly. The total sound pressure level is: $$L_{\text{total}} = 10 \log_{10} \left( \sum_{i=1}^n 10^{L_i / 10} \right)$$ **Step 2: Evaluate Individual Acoustic Power Ratios** $$10^{84.0 / 10} = 10^{8.40} = 251,188,643$$ $$10^{87.0 / 10} = 10^{8.70} = 501,187,234$$ $$10^{82.0 / 10} = 10^{8.20} = 158,489,319$$ **Step 3: Sum and Take Logarithm** $$\sum 10^{L_i / 10} = 251,188,643 + 501,187,234 + 158,489,319 = 910,865,196$$ $$L_{\text{total}} = 10 \log_{10} (910,865,196) = 10 \times 8.959453 = 89.5945 \text{ dBA} \approx 89.6 \text{ dBA}$$ **Step 4: Distractor Analysis** - Option A simply adds 0.3 dBA to the highest source ($87.0 + 0.3 = 87.3\text{ dBA}$). - Option C mistakenly adds the decibels linearly or applies a $+3\text{ dBA}$ increase multiple times ($87 + 3 + 2 = 92\text{ dBA}$). - Option D computes the arithmetic mean: $(84 + 87 + 82) / 3 = 84.33\text{ dBA}$. Conclusion: **89.6 dBA** (Option B).

Find out where you actually stand

A free 20-question diagnostic across every FE Other Disciplines knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Safety, Health, and Environment is where your time should go at all.

Start the free Other Disciplines diagnostic

Retaking the FE Other Disciplines exam?

Copy the scores from your NCEES diagnostic report and see whether Safety, Health, and Environment is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Other Disciplines knowledge areas

Safety, Health, and Environment on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.