ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 10 of 17

Safety, Health, and Environment on the FE Chemical exam

Safety, Health, and Environment accounts for 6 of the 110 questions — 5.5% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions6
Share of exam5.5%
Rank by weight10/17
In our bank22

What Safety, Health, and Environment covers

On the FE Chemical exam this area covers hazard identification and risk assessment, process safety management, toxicology and exposure limits, fire and explosion hazards, relief systems, and environmental regulation.

What the questions look like: A hazard classification, an exposure or dilution computation, or a relief sizing question.

Worth knowing cold: Regulatory questions reward reading precisely. The distinction between two similar-sounding limits is often the whole question.

3 free Safety, Health, and Environment practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A chemical storage room has a net enclosed volume of $V = 180\text{ m}^3$. A continuous fugitive emission of toluene vapor evaporates from open transfer operations at a steady rate of $\dot{m} = 45.0\text{ g/min}$. The molecular weight of toluene is $MW = 92.14\text{ g/mol}$ and the OSHA Permissible Exposure Limit (PEL-TWA) is $200\text{ ppmv}$ at standard conditions ($25^\circ\text{C}$ and $101.3\text{ kPa}$, molar volume $24.45\text{ L/mol}$). To ensure industrial hygiene compliance with non-ideal air distribution, a safety mixing factor of $k_m = 0.350$ is applied. The minimum required mechanical ventilation airflow rate $Q$ is most nearly:

  1. A98 m³/min
  2. B125 m³/min
  3. C171 m³/mincorrect
  4. D215 m³/min
Show the solution

Step 1: Convert the toluene PEL from ppmv to mass concentration in $\text{g/m}^3$ (or $\text{mg/m}^3$): $$C_{PEL} = \dfrac{PEL_{ppmv} \times MW}{24.45} = \dfrac{200 \times 92.14}{24.45} = 753.7\text{ mg/m}^3 = 0.7537\text{ g/m}^3$$ Step 2: Apply the steady-state industrial ventilation dilution equation from the FE Handbook: $$C_{steady} = \dfrac{\dot{m}}{k_m Q} \le C_{PEL}$$ where $\dot{m}$ is the generation rate, $k_m$ is the mixing factor ($0.350$), and $Q$ is the volumetric ventilation rate. Step 3: Solve for the required volumetric ventilation rate $Q$: $$Q = \dfrac{\dot{m}}{k_m C_{PEL}} = \dfrac{45.0\text{ g/min}}{0.350 \times 0.7537\text{ g/m}^3} = \dfrac{45.0}{0.2638} = 170.58\text{ m}^3/\text{min} \approx 171\text{ m}^3/\text{min}$$ Step 4: Check room air changes per hour (ACH): $$ACH = \dfrac{Q \times 60\text{ min/hr}}{V} = \dfrac{170.6 \times 60}{180\text{ m}^3} = 56.9\text{ air changes/hour}$$ Distractor Analysis: - Option A (98 m³/min) assumes ideal mixing ($k_m = 1.0$), which drastically underestimates the required airflow and creates dangerous localized vapor pockets. - Option B (125 m³/min) inverts the mixing factor or uses standard air density instead of concentration conversion. - Option D (215 m³/min) uses molecular weight of benzene ($78.11$) or calculates for $150\text{ ppmv}$.

Problem 2

A hazardous chemical transfer line experiences an accidental pipe shear, releasing toxic chlorine gas at ground level ($H = 0$) at a continuous steady release rate of $Q_m = 1.50\text{ kg/s}$. Meteorological conditions correspond to neutral atmospheric stability (Pasquill-Gifford Class D) with a mean wind speed of $u = 4.0\text{ m/s}$. At a downwind distance of $x = 1000\text{ m}$, the dispersion coefficients along the plume centerline are $\sigma_y = 68.0\text{ m}$ and $\sigma_z = 32.0\text{ m}$. Using the ground-level centerline Gaussian plume dispersion equation from the NCEES FE Reference Handbook: $$C(x, 0, 0) = \frac{Q_m}{\pi u \sigma_y \sigma_z}$$ The ground-level centerline chlorine concentration $C$ (in $\text{mg/m}^3$) is most nearly:

  1. A27.4 mg/m³
  2. B54.9 mg/m³correct
  3. C86.2 mg/m³
  4. D120.5 mg/m³
Show the solution

Step 1: State the ground-level Gaussian plume equation from the NCEES FE Reference Handbook: For a source at ground level ($H = 0$) along the ground centerline ($y = 0, z = 0$): $$C = \frac{Q_m}{\pi u \sigma_y \sigma_z}$$ Step 2: Convert emission rate to milligrams per second: $$Q_m = 1.50\text{ kg/s} = 1.50 \times 10^6\text{ mg/s}$$ Step 3: Evaluate the denominator: $$\text{Denominator} = \pi \times (4.0\text{ m/s}) \times (68.0\text{ m}) \times (32.0\text{ m})$$ $$\text{Denominator} = \pi \times 4.0 \times 2176 = \pi \times 8704 \approx 27,344.4\text{ m}^3/\text{s}$$ Step 4: Compute the toxic concentration $C$: $$C = \frac{1.50 \times 10^6\text{ mg/s}}{27,344.4\text{ m}^3/\text{s}} \approx 54.856\text{ mg/m}^3 \approx 54.9\text{ mg/m}^3$$ Distractor Analysis: - Option A (27.4 mg/m³): Includes an extra factor of 2 in denominator ($2\pi u \sigma_y \sigma_z$), which applies only to elevated releases reflected at ground level. - Option B (54.9 mg/m³): Correct. - Option C (86.2 mg/m³): Uses stability Class C dispersion parameters. - Option D (120.5 mg/m³): Neglects $\pi$ in the denominator.

Problem 3

Under OSHA Process Safety Management (PSM, 29 CFR 1910.119) and EPA Risk Management Program (RMP) regulations for highly hazardous chemical manufacturing facilities, which of the following requirements are mandatory regulatory elements of a compliant process safety program? Select the two that apply.

  1. AA formal Process Hazard Analysis (PHA) utilizing recognized engineering methodologies (such as HAZOP, What-If, or FMEA) must be updated and revalidated at least every five years
  2. BManagement of Change (MOC) written procedures must be executed prior to any chemical, technological, equipment, or operational change not classified as replacement in kind
  3. COperating procedures may be communicated verbally to operating technicians without written documentation if authorized by the shift supervisor
  4. DHot work permits for spark-producing activities outside maintenance shops are voluntary industry suggestions rather than mandatory regulatory requirements
Show the solution

Step 1: Analyze Process Hazard Analysis requirement (Option A): Under OSHA 29 CFR 1910.119(e)(6), the employer must update and revalidate the process hazard analysis (PHA) by a qualified multidisciplinary team at least every five years after the completion of the initial PHA. Option A is correct. Step 2: Analyze Management of Change requirement (Option B): Under OSHA 29 CFR 1910.119(l)(1), written procedures to manage changes to process chemicals, technology, equipment, and procedures (MOC) must be implemented prior to any change, with only strict 'replacements in kind' exempt. Option B is correct. Step 3: Analyze incorrect statements (Options C and D): - Option C is false: Section 1910.119(f) strictly mandates written operating procedures readily accessible to all operating technicians; verbal procedures are a direct violation. - Option D is false: Section 1910.119(k) requires mandatory written hot work permits for any hot work operations conducted on or near a covered process.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Safety, Health, and Environment is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Safety, Health, and Environment is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas

Safety, Health, and Environment on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.