ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 5 of 17

Mass Transfer and Separation on the FE Chemical exam

Mass Transfer and Separation accounts for 8 of the 110 questions — 7.3% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions8
Share of exam7.3%
Rank by weight5/17
In our bank29

What Mass Transfer and Separation covers

On the FE Chemical exam this area covers diffusion, mass transfer coefficients, equilibrium stages, distillation, absorption and stripping, extraction, membranes, and humidification and drying.

What the questions look like: A number of theoretical stages, a McCabe-Thiele construction, or a mass transfer rate across a film.

Worth knowing cold: Equilibrium-stage problems are graphical at heart. Being quick with an operating line and an equilibrium curve beats memorising correlations.

3 free Mass Transfer and Separation practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A continuous distillation column separates a binary mixture of benzene and toluene with a relative volatility of $\alpha = 2.50$. The feed enters as a saturated liquid ($q = 1.0$) with mole fraction $x_F = 0.45$. The desired distillate purity is $x_D = 0.95$ and bottoms purity is $x_B = 0.05$. The column operates at a reflux ratio equal to $1.50$ times the minimum reflux ratio ($R = 1.50 R_{min}$). Using the McCabe-Thiele diagram shown, the slope of the rectifying section operating line is most nearly:

  1. A0.557
  2. B0.653correct
  3. C0.742
  4. D0.814
Show the solution

Step 1: Find the vapor-liquid equilibrium composition $y^*$ at the feed condition: For a saturated liquid feed ($q = 1.0$), the feed line (q-line) is vertical at $x = x_F = 0.45$. From the relative volatility relation: $$y^* = \dfrac{\alpha x_F}{1 + (\alpha - 1) x_F} = \dfrac{2.50 \times 0.45}{1 + (2.50 - 1)(0.45)} = \dfrac{1.125}{1 + 0.675} = \dfrac{1.125}{1.675} = 0.6716$$ Step 2: Calculate the minimum reflux ratio $R_{min}$ from the pinch point $(x_F, y^*)$ and $(x_D, x_D)$: $$R_{min} = \dfrac{x_D - y^*}{y^* - x_F} = \dfrac{0.950 - 0.6716}{0.6716 - 0.450} = \dfrac{0.2784}{0.2216} = 1.2563$$ Step 3: Calculate the actual operating reflux ratio $R$: $$R = 1.50 \times R_{min} = 1.50 \times 1.2563 = 1.8845$$ Step 4: Determine the slope of the rectifying (enriching) section operating line: $$\text{Slope} = \dfrac{R}{R + 1} = \dfrac{1.8845}{1.8845 + 1} = \dfrac{1.8845}{2.8845} = 0.6533 \approx 0.653$$ Distractor Analysis: - Option A (0.557) is the slope at minimum reflux: $R_{min} / (R_{min} + 1) = 1.256 / 2.256 = 0.557$. - Option C (0.742) uses $R = 2.0 R_{min}$ or computes $(R+1)/R$ inverted. - Option D (0.814) calculates the stripping section operating line slope instead of the rectifying section.

Problem 2

A single-stage liquid-liquid extraction unit treats $F = 1000\text{ kg/h}$ of an aqueous feed containing $10.0\text{ wt\%}$ acetic acid (solute) and $90.0\text{ wt\%}$ water (carrier solvent). The extracting solvent is pure ethyl acetate fed at $S = 800\text{ kg/h}$. Water and ethyl acetate are considered completely immiscible. The equilibrium distribution relation between the extract phase ($Y$, kg solute / kg ethyl acetate) and raffinate phase ($X$, kg solute / kg water) is linear: $Y = 0.85 X$. The weight fraction of acetic acid remaining in the washed raffinate stream leaving the stage is most nearly:

  1. A3.8%
  2. B6.0%correct
  3. C8.5%
  4. D10.0%
Show the solution

Step 1: Determine the mass of carrier water ($B$) and initial solute ratio ($X_0$): $$\text{Total Feed } F = 1000\text{ kg/h}$$ $$\text{Solute fed } = (1000)(0.10) = 100.0\text{ kg/h}$$ $$\text{Water fed } B = 1000 - 100.0 = 900.0\text{ kg/h}$$ $$X_0 = \frac{100.0\text{ kg solute}}{900.0\text{ kg water}} = 0.11111\text{ kg solute / kg water}$$ Step 2: Write the mass balance across the single equilibrium extraction stage: With pure extracting solvent fed ($S = 800.0\text{ kg/h}$, $Y_0 = 0$): $$B X_0 + S Y_0 = B X_1 + S Y_1$$ $$B X_0 = B X_1 + S (0.85 X_1) = X_1 (B + 0.85 S)$$ Step 3: Solve for the equilibrium raffinate mole ratio ($X_1$): $$X_1 = \frac{B X_0}{B + 0.85 S} = \frac{100.0\text{ kg/h}}{900.0 + (0.85)(800.0)}$$ $$X_1 = \frac{100.0}{900.0 + 680.0} = \frac{100.0}{1580.0} \approx 0.06329\text{ kg solute / kg water}$$ Step 4: Convert ratio ($X_1$) to raffinate mass fraction ($x_1$): $$x_1 = \frac{X_1}{1 + X_1} = \frac{0.06329}{1 + 0.06329} = \frac{0.06329}{1.06329} \approx 0.05952 = 5.95\% \approx 6.0\%$$ Distractor Analysis: - Option A (3.8%): Assumes a multi-stage countercurrent extraction cascade. - Option B (6.0%): Correct. - Option C (8.5%): Uses simple partition ratio without accounting for solvent flow rate. - Option D (10.0%): Assumes zero mass transfer occurs.

Problem 3

A continuous distillation column fractionates a binary mixture. The feed enters at $T_F = 60.0^\circ\text{C}$ as a subcooled liquid with a bubble point of $T_b = 90.0^\circ\text{C}$ (subcooling $\Delta T_{sub} = 30.0^\circ\text{C}$). The average liquid heat capacity is $c_{p,L} = 2.20\text{ kJ}/(\text{kg}\cdot\text{K})$ and the molar latent heat of vaporization is $\Delta H_{vap} = 330.0\text{ kJ/kg}$. In the McCabe-Thiele method from the NCEES FE Reference Handbook ($q = 1 + \frac{c_{p,L}(T_b - T_F)}{\Delta H_{vap}}$ and $q\text{-line slope} = \frac{q}{q - 1}$), the feed condition parameter ($q$) and the slope of the feed $q$-line on the $y-x$ diagram are:

  1. Aq = 0.80, slope = -4.00
  2. Bq = 1.20, slope = +6.00correct
  3. Cq = 1.50, slope = +3.00
  4. Dq = 2.00, slope = +2.00
Show the solution

Step 1: Calculate the feed thermal quality parameter ($q$) from the NCEES FE Reference Handbook: $$q = 1 + \frac{c_{p,L} (T_b - T_F)}{\Delta H_{vap}}$$ $$q = 1 + \frac{(2.20\text{ kJ}/(\text{kg}\cdot\text{K}))(90.0^\circ\text{C} - 60.0^\circ\text{C})}{330.0\text{ kJ/kg}} = 1 + \frac{(2.20)(30.0)}{330.0} = 1 + \frac{66.0}{330.0} = 1 + 0.200 = 1.200$$ Step 2: Determine the geometric slope of the $q$-line: $$\text{Slope} = \frac{q}{q - 1} = \frac{1.200}{1.200 - 1.000} = \frac{1.200}{0.200} = +6.00$$ Distractor Analysis: - Option A: Assumes partially vaporized feed ($q = 0.80$, slope $= -4.0$). - Option B: Correct. - Option C: Uses $q = 1.50$. - Option D: Inverts the denominator.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Mass Transfer and Separation is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Mass Transfer and Separation is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas