ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 9 of 17

Mathematics on the FE Chemical exam

Mathematics accounts for 6 of the 110 questions — 5.5% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions6
Share of exam5.5%
Rank by weight9/17
In our bank22

What Mathematics covers

On the FE Chemical exam this area covers algebra and trigonometry, analytic geometry, vectors, matrix and determinant operations, differential and integral calculus, differential equations, and numerical methods.

What the questions look like: Short, self-contained computations: a determinant, a derivative evaluated at a point, the area under a curve, a dot or cross product, or the root of an equation by Newton’s method.

Worth knowing cold: These are the cheapest points on the exam and the fastest to lose. Practise them until they take under a minute each, because the time you save here is time you spend on the long discipline questions.

3 free Mathematics practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A gas-phase reaction equilibrium yields the nonlinear equation $f(x) = 4x^2 + 1.50x - 1.50 = 0$, where $x$ represents the fractional extent of reaction. Starting with an initial estimate of $x_0 = 0.500$, the value of $x$ after two iterations of the Newton-Raphson method ($x_2$) is most nearly:

  1. A0.388
  2. B0.453correct
  3. C0.512
  4. D0.567
Show the solution

Step 1: Compute the derivative of $f(x)$: $$f(x) = 4x^2 + 1.50x - 1.50$$ $$f'(x) = 8x + 1.50$$ Step 2: First iteration from $x_0 = 0.500$: $$f(x_0) = 4(0.500)^2 + 1.50(0.500) - 1.50 = 1.00 + 0.75 - 1.50 = 0.250$$ $$f'(x_0) = 8(0.500) + 1.50 = 4.00 + 1.50 = 5.500$$ $$x_1 = x_0 - \dfrac{f(x_0)}{f'(x_0)} = 0.500 - \dfrac{0.250}{5.500} = 0.500 - 0.04545 = 0.45455$$ Step 3: Second iteration from $x_1 = 0.45455$: $$f(x_1) = 4(0.45455)^2 + 1.50(0.45455) - 1.50 = 4(0.20661) + 0.68182 - 1.50$$ $$f(x_1) = 0.82646 + 0.68182 - 1.50 = 0.00828$$ $$f'(x_1) = 8(0.45455) + 1.50 = 3.6364 + 1.50 = 5.1364$$ $$x_2 = x_1 - \dfrac{f(x_1)}{f'(x_1)} = 0.45455 - \dfrac{0.00828}{5.1364} = 0.45455 - 0.00161 = 0.45294 \approx 0.453$$ Step 4: Verify with exact quadratic formula root: $$x = \dfrac{-1.50 + \sqrt{2.25 - 4(4)(-1.50)}}{8} = \dfrac{-1.50 + \sqrt{26.25}}{8} = \dfrac{-1.50 + 5.1235}{8} = 0.4529$$ Confirmed. Distractor Analysis: - Option A (0.388) subtracts the ratio with an inverted derivative sign. - Option C (0.512) adds the correction instead of subtracting it. - Option D (0.567) stops after one iteration and adds the step.

Problem 2

The linearized dynamic state-space matrix governing two coupled continuous stirred tank reactors is given by: $$\mathbf{A} = \begin{pmatrix} -3.0 & 2.0 \\ 1.0 & -4.0 \end{pmatrix}$$ From the characteristic equation $\det(\mathbf{A} - \lambda \mathbf{I}) = 0$ in the NCEES FE Reference Handbook, the dominant (algebraically largest / slowest decaying) eigenvalue ($\lambda_{dom}$) is:

Show the solution

Step 1: Set up the characteristic polynomial equation from the NCEES FE Reference Handbook: $$\det(\mathbf{A} - \lambda \mathbf{I}) = \det \begin{pmatrix} -3.0 - \lambda & 2.0 \\ 1.0 & -4.0 - \lambda \end{pmatrix} = 0$$ Step 2: Expand the determinant: $$(-3.0 - \lambda)(-4.0 - \lambda) - (2.0)(1.0) = 0$$ $$(\lambda + 3.0)(\lambda + 4.0) - 2.0 = 0$$ $$\lambda^2 + 7.0 \lambda + 12.0 - 2.0 = 0$$ $$\lambda^2 + 7.0 \lambda + 10.0 = 0$$ Step 3: Factor the quadratic characteristic equation: $$(\lambda + 2.0)(\lambda + 5.0) = 0$$ $$\lambda_1 = -2.0, \qquad \lambda_2 = -5.0$$ Step 4: Identify the dominant eigenvalue: The dominant eigenvalue is the one closest to the imaginary axis (least negative, algebraically largest), which dictates the dominant settling time of the dynamic transient response: $$\lambda_{dom} = -2.0$$ Distractor Analysis: - Selecting $\lambda = -5.0$ identifies the fast-decaying mode rather than the dominant pole.

Problem 3

The dynamic liquid level oscillation in a process surge tank is governed by the second-order linear ordinary differential equation: $$\frac{d^2 y}{dt^2} + 4.0 \frac{dy}{dt} + 20.0 y = 0$$ From the standard second-order characteristic equation $s^2 + 2 \zeta \omega_n s + \omega_n^2 = 0$ in the NCEES FE Reference Handbook, the undamped natural frequency ($\omega_n$), damping ratio ($\zeta$), and damped oscillation frequency ($\omega_d$) are:

  1. Aω_n = 3.50, ζ = 0.25, ω_d = 2.80 rad/s
  2. Bω_n = 4.47, ζ = 0.45, ω_d = 4.00 rad/scorrect
  3. Cω_n = 5.20, ζ = 0.60, ω_d = 4.80 rad/s
  4. Dω_n = 6.00, ζ = 0.75, ω_d = 5.50 rad/s
Show the solution

Step 1: Match the differential equation to the standard second-order form from the NCEES FE Reference Handbook: $$s^2 + 2 \zeta \omega_n s + \omega_n^2 = s^2 + 4.0 s + 20.0 = 0$$ Step 2: Solve for undamped natural frequency ($\omega_n$): $$\omega_n^2 = 20.0 \implies \omega_n = \sqrt{20.0} \approx 4.4721\text{ rad/s} \approx 4.47\text{ rad/s}$$ Step 3: Solve for the damping ratio ($\zeta$): $$2 \zeta \omega_n = 4.0 \implies \zeta = \frac{4.0}{2 \omega_n} = \frac{2.0}{\sqrt{20.0}} = \frac{2.0}{4.4721} \approx 0.4472 \approx 0.45$$ Because $\zeta < 1.0$, the system is underdamped and oscillates. Step 4: Compute the damped oscillation frequency ($\omega_d$): $$\omega_d = \omega_n \sqrt{1 - \zeta^2} = \sqrt{\omega_n^2 - (\zeta \omega_n)^2} = \sqrt{20.0 - (2.0)^2} = \sqrt{20.0 - 4.0} = \sqrt{16.0} = 4.00\text{ rad/s}$$ Distractor Analysis: - Option A: Uses $omega_n = \sqrt{12}$. - Option B: Correct. - Option C: Overestimates damping ratio ($zeta = 0.60$). - Option D: Uses $omega_n = \sqrt{36}$.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Mathematics is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Mathematics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas

Mathematics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.