The chemical process flowsheet shown features a reactor and separator with a recycle and purge system. The fresh feed enters at $100\text{ mol/hr}$ containing $96.0\text{ mol}\%$ reactant A and $4.0\text{ mol}\%$ inert species I. In the reactor, A is converted to product P ($A \to P$) with a single-pass conversion of $40.0\%$. The separator completely removes pure product P as the bottoms stream. The overhead stream containing unreacted A and all inerts is split: $90.0\%$ is recycled to mix with the fresh feed, and $10.0\%$ is purged. At steady state, the mole fraction of inerts in the purge stream is most nearly:
- A12.8%
- B18.5%
- C24.2%correct
- D31.6%
Show the solution
Step 1: Perform an overall inerts balance: Since inerts enter only in the fresh feed and can exit only through the purge stream, at steady state: $$n_{I,purge} = n_{I,fresh} = 100\text{ mol/hr} \times 0.040 = 4.00\text{ mol/hr}$$ Step 2: Relate reactant A flows around the reactor and separator: Let $n_{A,in}$ be the total molar flow rate of A entering the reactor, and $n_{A,out}$ be the flow rate of unreacted A leaving the reactor into the overhead: $$n_{A,out} = (1 - 0.40) n_{A,in} = 0.60 n_{A,in}$$ Since $90\%$ of the overhead is recycled: $$n_{A,in} = n_{A,fresh} + n_{A,rec} = (100 \times 0.96) + 0.90 n_{A,out} = 96.0 + 0.90 n_{A,out}$$ Step 3: Solve for unreacted A in the overhead stream: $$n_{A,out} = 0.60 (96.0 + 0.90 n_{A,out}) = 57.6 + 0.54 n_{A,out}$$ $$n_{A,out} (1 - 0.54) = 57.6 \implies 0.46 n_{A,out} = 57.6 \implies n_{A,out} = 125.22\text{ mol/hr}$$ Step 4: Calculate the purge stream composition: The purge takes $10\%$ of the overhead stream: $$n_{A,purge} = 0.10 n_{A,out} = 0.10 \times 125.22 = 12.52\text{ mol/hr}$$ $$n_{total,purge} = n_{A,purge} + n_{I,purge} = 12.52 + 4.00 = 16.52\text{ mol/hr}$$ $$y_{I,purge} = \dfrac{n_{I,purge}}{n_{total,purge}} = \dfrac{4.00}{16.52} = 0.2421 = 24.2\%$$ Distractor Analysis: - Option A (12.8%) incorrectly assumes that inerts split in a different ratio than the purge split. - Option B (18.5%) calculates the overall conversion based on fresh feed only without considering recycle accumulation. - Option D (31.6%) omits the fresh feed contribution to the recycle mixer.