ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 8 of 17

Chemistry and Biology on the FE Chemical exam

Chemistry and Biology accounts for 7 of the 110 questions — 6.4% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions7
Share of exam6.4%
Rank by weight8/17
In our bank25

What Chemistry and Biology covers

On the FE Chemical exam this area covers atomic structure and periodicity, stoichiometry, solutions and equilibria, acids and bases, electrochemistry, organic functional groups, and biological fundamentals.

What the questions look like: A stoichiometric conversion, a pH, or an identification of a functional group or reaction type.

Worth knowing cold: The chemistry here is first-year level but easy to rush. Balancing the equation properly is usually the whole problem.

3 free Chemistry and Biology practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A continuous biological fermenter (chemostat) operates at steady state with sterile feed containing glucose substrate at $S_0 = 15.0\text{ g/L}$. Cell growth follows Monod kinetics with maximum specific growth rate $\mu_{max} = 0.400\text{ hr}^{-1}$, half-saturation constant $K_s = 0.250\text{ g/L}$, and biomass yield coefficient $Y_{X/S} = 0.450\text{ g cells / g substrate}$. Endogenous cell death is negligible. If the chemostat is operated at a dilution rate of $D = 0.300\text{ hr}^{-1}$, the steady-state biomass concentration in the effluent is most nearly:

  1. A4.50 g/L
  2. B5.82 g/L
  3. C6.41 g/Lcorrect
  4. D7.25 g/L
Show the solution

Step 1: Apply the steady-state biomass balance for a chemostat: $$\dfrac{dX}{dt} = 0 = (\mu - D) X \implies \mu = D = 0.300\text{ hr}^{-1}$$ Step 2: Solve the Monod equation for the steady-state substrate concentration $S$: $$\mu = \dfrac{\mu_{max} S}{K_s + S} \implies 0.300 = \dfrac{0.400 S}{0.250 + S}$$ $$0.300(0.250 + S) = 0.400 S$$ $$0.0750 + 0.300 S = 0.400 S \implies 0.100 S = 0.0750 \implies S = 0.750\text{ g/L}$$ Step 3: Apply the steady-state substrate balance to determine biomass concentration $X$: $$D (S_0 - S) - \dfrac{\mu X}{Y_{X/S}} = 0$$ Since $\mu = D$: $$X = Y_{X/S} (S_0 - S)$$ $$X = 0.450 \times (15.0 - 0.750) = 0.450 \times 14.25 = 6.4125\text{ g/L} \approx 6.41\text{ g/L}$$ Distractor Analysis: - Option A (4.50 g/L) ignores the unconsumed substrate, calculating $X = Y_{X/S} \times 10.0$. - Option B (5.82 g/L) subtracts $K_s$ instead of $S$ from $S_0$: $0.45(15.0 - 2.08) = 5.82$. - Option D (7.25 g/L) assumes 100% conversion of substrate without residual $S$: $0.45 \times 15.0 = 6.75$ plus rounding errors.

Problem 2

In an enzymatic reaction study, the initial reaction rate was measured over a range of substrate concentrations in both the absence and presence of an organic inhibitor. A Lineweaver-Burk double reciprocal plot ($1/v$ vs $1/[S]$) yields the following linear regression parameters: - Without inhibitor: $y$-intercept $= 0.0200\ (\mu\text{mol}/(\text{L}\cdot\text{min}))^{-1}$, and $x$-intercept $= -0.250\text{ mM}^{-1}$ - With $[I] = 1.50\text{ mM}$ inhibitor: $y$-intercept $= 0.0200\ (\mu\text{mol}/(\text{L}\cdot\text{min}))^{-1}$, and $x$-intercept $= -0.100\text{ mM}^{-1}$ The mechanism of enzyme inhibition and the inhibitor dissociation constant ($K_i$) are:

  1. ANoncompetitive inhibition; Ki = 2.50 mM
  2. BCompetitive inhibition; Ki = 1.00 mMcorrect
  3. CUncompetitive inhibition; Ki = 1.50 mM
  4. DCompetitive inhibition; Ki = 4.00 mM
Show the solution

Step 1: Identify the inhibition type from the Lineweaver-Burk plot intercepts: In the Lineweaver-Burk equation: $$\frac{1}{v} = \frac{K_m}{V_{max}} \frac{1}{[S]} + \frac{1}{V_{max}}$$ - The $y$-intercept equals $1 / V_{max}$. Because the $y$-intercept remains unchanged at $0.0200$, the maximum reaction velocity is unaffected ($V_{max} = 1 / 0.0200 = 50.0\ \mu\text{mol}/(\text{L}\cdot\text{min})$). - The $x$-intercept equals $-1 / K_m^{app}$. The $x$-intercept shifts from $-0.250$ to $-0.100$, indicating an increase in apparent $K_m$. An unchanged $V_{max}$ coupled with an increased apparent $K_m$ is the defining characteristic of COMPETITIVE INHIBITION. Step 2: Determine $K_m$ and $K_m^{app}$: $$K_m = -\frac{1}{x\text{-intercept}_{uninhibited}} = -\frac{1}{-0.250} = 4.00\text{ mM}$$ $$K_m^{app} = -\frac{1}{x\text{-intercept}_{inhibited}} = -\frac{1}{-0.100} = 10.00\text{ mM}$$ Step 3: Calculate the inhibitor dissociation constant ($K_i$): For competitive inhibition: $$K_m^{app} = K_m \left( 1 + \frac{[I]}{K_i} \right)$$ $$10.00 = 4.00 \left( 1 + \frac{1.50}{K_i} \right)$$ $$\frac{10.00}{4.00} = 2.50 = 1 + \frac{1.50}{K_i}$$ $$\frac{1.50}{K_i} = 2.50 - 1.00 = 1.50 \implies K_i = \frac{1.50}{1.50} = 1.00\text{ mM}$$ Distractor Analysis: - Option A: Identifies noncompetitive inhibition, which would alter $V_{max}$ ($y$-intercept). - Option B: Correct. - Option C: Identifies uncompetitive inhibition, which shifts both intercepts parallel. - Option D: Confuses $K_m$ ($4.00\text{ mM}$) with $K_i$.

Problem 3

An industrial liquid-phase saponification reaction has a measured second-order rate constant of $k_1 = 0.0400\text{ L}/(\text{mol}\cdot\text{s})$ at temperature $T_1 = 298.0\text{ K}$ and $k_2 = 0.200\text{ L}/(\text{mol}\cdot\text{s})$ at $T_2 = 323.0\text{ K}$. Using the Arrhenius activation energy relation from the NCEES FE Reference Handbook ($\ln\frac{k_2}{k_1} = \frac{E_a}{R}\left[\frac{1}{T_1} - \frac{1}{T_2}\right]$, with universal gas constant $R = 8.314\text{ J}/(\text{mol}\cdot\text{K})$), the activation energy of the reaction ($E_a$, in kJ/mol) is most nearly:

Show the solution

Step 1: State the two-point Arrhenius equation from the NCEES FE Reference Handbook: $$\ln\left(\frac{k_2}{k_1}\right) = \frac{E_a}{R} \left( \frac{1}{T_1} - \frac{1}{T_2} \right)$$ Step 2: Calculate the rate constant ratio and temperature difference: $$\frac{k_2}{k_1} = \frac{0.200}{0.0400} = 5.000$$ $$\ln(5.000) \approx 1.609438$$ $$\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{298.0\text{ K}} - \frac{1}{323.0\text{ K}} = 0.00335570 - 0.00309598 = 2.59727 \times 10^{-4}\text{ K}^{-1}$$ Step 3: Solve for the activation energy ($E_a$): $$E_a = \frac{R \times \ln(k_2 / k_1)}{\frac{1}{T_1} - \frac{1}{T_2}} = \frac{(8.314\text{ J}/(\text{mol}\cdot\text{K})) \times (1.609438)}{2.59727 \times 10^{-4}\text{ K}^{-1}}$$ $$E_a = \frac{13.38087}{2.59727 \times 10^{-4}} \approx 51,519\text{ J/mol} \approx 51.5\text{ kJ/mol}$$ Distractor Analysis: - Using temperatures in degrees Celsius ($25$ and $50$) produces an invalid negative result. - Using $R = 1.987\text{ cal}/(\text{mol}\cdot\text{K})$ gives $12.3\text{ kcal/mol}$.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Chemistry and Biology is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Chemistry and Biology is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas