ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 3 of 17

Fluid Mechanics/Dynamics on the FE Chemical exam

Fluid Mechanics/Dynamics accounts for 8 of the 110 questions — 7.3% of your exam. It is one of the three heaviest areas on this paper, so it is worth your study time before almost anything else.

Questions8
Share of exam7.3%
Rank by weight3/17
In our bank29

What Fluid Mechanics/Dynamics covers

On the FE Chemical exam this area covers fluid statics, the continuity, energy and momentum equations, laminar and turbulent pipe flow, friction and minor losses, pumps and compressors, and flow measurement.

What the questions look like: A pump power requirement, a head loss along a line, or a flow rate from a measured pressure difference.

Worth knowing cold: Pump and system curves recur in process problems. Being fluent with the energy equation in head form saves time across the whole exam.

3 free Fluid Mechanics/Dynamics practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A horizontal Venturi meter is installed in a pipeline carrying kerosene (density $\rho = 820\text{ kg/m}^3$) as shown in the diagram. The inlet pipe diameter is $D_1 = 150\text{ mm}$ and the throat diameter is $D_2 = 75\text{ mm}$. A differential mercury manometer ($\rho_m = 13,600\text{ kg/m}^3$) connected between the upstream inlet and the throat indicates a differential level of $h = 240\text{ mm}$. If the meter discharge coefficient is $C_d = 0.98$, the volumetric flow rate of kerosene is most nearly:

  1. A27.6 L/s
  2. B38.3 L/scorrect
  3. C45.1 L/s
  4. D52.8 L/s
Show the solution

Step 1: Calculate the differential pressure between the inlet and the throat from the manometer reading: $$\Delta P = P_1 - P_2 = (\rho_m - \rho) g h$$ $$\Delta P = (13,600 - 820)\text{ kg/m}^3 \times 9.81\text{ m/s}^2 \times 0.240\text{ m} = 12,780 \times 9.81 \times 0.240 = 30,089\text{ Pa} = 30.09\text{ kPa}$$ Step 2: Determine the diameter ratio and cross-sectional areas: $$\beta = \dfrac{D_2}{D_1} = \dfrac{75}{150} = 0.50$$ $$A_2 = \dfrac{\pi}{4} D_2^2 = \dfrac{\pi}{4} (0.075\text{ m})^2 = 4.4179 \times 10^{-3}\text{ m}^2$$ Step 3: Calculate the throat velocity using the Venturi equation from the FE Handbook: $$V_2 = \dfrac{C_d}{\sqrt{1 - \beta^4}} \sqrt{\dfrac{2 \Delta P}{\rho}} = \dfrac{0.98}{\sqrt{1 - 0.50^4}} \sqrt{\dfrac{2 \times 30,089}{820}}$$ $$\sqrt{1 - 0.0625} = \sqrt{0.9375} = 0.96825$$ $$V_2 = \dfrac{0.98}{0.96825} \times \sqrt{73.388} = 1.0121 \times 8.5667 = 8.670\text{ m/s}$$ Step 4: Compute the volumetric flow rate: $$Q = A_2 V_2 = 4.4179 \times 10^{-3}\text{ m}^2 \times 8.670\text{ m/s} = 0.03830\text{ m}^3/\text{s} = 38.3\text{ L/s}$$ Distractor Analysis: - Option A (27.6 L/s) forgets the mercury buoyant density correction, using $\rho_m$ instead of $(\rho_m - \rho)$, or inverts the diameter ratio. - Option C (45.1 L/s) omits the velocity-of-approach factor $\sqrt{1 - \beta^4}$ and assumes an ideal $C_d = 1.0$. - Option D (52.8 L/s) calculates the flow using the inlet area $A_1$ instead of the throat area $A_2$.

Problem 2

A centrifugal water pump (fluid density $\rho = 1000\text{ kg/m}^3$) operates in a chemical transfer system whose characteristics are given by: - Pump total head curve: $H_p = 50.0 - 0.0020 Q^2$ (head in m, flow rate $Q$ in $\text{m}^3/\text{h}$) - System head curve: $H_{sys} = 15.0 + 0.0015 Q^2$ At the operating point, the pump mechanical efficiency is $\eta = 75.0\%$. The brake power required by the pump motor (in kW) is most nearly:

  1. A6.1 kW
  2. B8.2 kW
  3. C10.9 kWcorrect
  4. D14.5 kW
Show the solution

Step 1: Find the operating point by equating pump head to system head: $$H_p = H_{sys}$$ $$50.0 - 0.0020 Q^2 = 15.0 + 0.0015 Q^2$$ $$50.0 - 15.0 = 0.0035 Q^2$$ $$35.0 = 0.0035 Q^2 \implies Q^2 = \frac{35.0}{0.0035} = 10,000$$ $$Q = \sqrt{10,000} = 100.0\text{ m}^3/\text{h}$$ Step 2: Determine operating head ($H$): $$H = 50.0 - 0.0020(100.0)^2 = 50.0 - 20.0 = 30.0\text{ m}$$ Step 3: Convert flow rate to cubic meters per second: $$Q = \frac{100.0\text{ m}^3/\text{h}}{3600\text{ s/h}} \approx 0.027778\text{ m}^3/\text{s}$$ Step 4: Calculate hydraulic power ($P_{hyd}$) from the NCEES FE Reference Handbook: $$P_{hyd} = \rho g Q H = (1000\text{ kg/m}^3)(9.81\text{ m/s}^2)(0.027778\text{ m}^3/\text{s})(30.0\text{ m})$$ $$P_{hyd} = 8175.0\text{ W} = 8.175\text{ kW}$$ Step 5: Compute required brake power ($P_{brake}$): $$P_{brake} = \frac{P_{hyd}}{\eta} = \frac{8.175\text{ kW}}{0.750} = 10.90\text{ kW} \approx 10.9\text{ kW}$$ Distractor Analysis: - Option A (6.1 kW): Multiplies by efficiency instead of dividing ($8.175 \times 0.75 = 6.13\text{ kW}$). - Option B (8.2 kW): Reports hydraulic power ($P_{hyd}$), ignoring pump mechanical inefficiency. - Option C (10.9 kW): Correct. - Option D (14.5 kW): Uses shutoff head ($50\text{ m}$) instead of operating head ($30\text{ m}$).

Problem 3

A centrifugal process water pump running at rotational speed $N_1 = 1750.0\text{ rpm}$ develops a discharge head of $H_1 = 30.0\text{ m}$ while drawing $P_1 = 15.0\text{ kW}$ of electrical shaft power from its motor. A variable frequency drive (VFD) increases the pump rotational speed to $N_2 = 2100.0\text{ rpm}$. In accordance with the pump Affinity Laws from the NCEES FE Reference Handbook ($\frac{P_2}{P_1} = [\frac{N_2}{N_1}]^3$), the revised brake horsepower required by the pump at the higher speed ($P_2$, in kW) is most nearly:

Show the solution

Step 1: Calculate the pump rotational speed ratio from the NCEES FE Reference Handbook: $$\frac{N_2}{N_1} = \frac{2100.0\text{ rpm}}{1750.0\text{ rpm}} = 1.200$$ Step 2: Apply the pump Affinity Law for power consumption: $$\frac{P_2}{P_1} = \left(\frac{N_2}{N_1}\right)^3 = (1.200)^3 = 1.728$$ Step 3: Calculate the revised power requirement ($P_2$): $$P_2 = P_1 \times 1.728 = (15.0\text{ kW}) \times (1.728) = 25.92\text{ kW} \approx 25.9\text{ kW}$$ Distractor Analysis: - Applying the head affinity law ($N^2$) instead of power ($N^3$) yields $P_2 = 15.0 \times 1.44 = 21.6\text{ kW}$. - Applying the linear flow law ($N^1$) yields $P_2 = 18.0\text{ kW}$.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Fluid Mechanics/Dynamics is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Fluid Mechanics/Dynamics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas