ExamPass EngineeringExamPass Engineering Start free
FE Industrial and Systems · Knowledge area 11 of 13

Mathematics on the FE Industrial and Systems exam

Mathematics accounts for 6 of the 110 questions — 5.5% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions6
Share of exam5.5%
Rank by weight11/13
In our bank21

What Mathematics covers

On the FE Industrial and Systems exam this area covers algebra and trigonometry, analytic geometry, vectors, matrix and determinant operations, differential and integral calculus, differential equations, and numerical methods.

What the questions look like: Short, self-contained computations: a determinant, a derivative evaluated at a point, the area under a curve, a dot or cross product, or the root of an equation by Newton’s method.

Worth knowing cold: These are the cheapest points on the exam and the fastest to lose. Practise them until they take under a minute each, because the time you save here is time you spend on the long discipline questions.

3 free Mathematics practice problems

These come from our FE Industrial and Systems bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

An industrial manufacturing plant models its quarterly production throughput using a Cobb-Douglas production function: Q(K, L) = 60 · K^0.4 · L^0.6, where K represents capital machinery units and L represents labor-hours. The unit cost of capital is PK = USD 40 and the wage rate of labor is PL = USD 30 per hour. The company has an available operational expenditure budget constraint of C = USD 60,000. Using the method of Lagrange multipliers for constrained optimization (maximize Q subject to PK·K + PL·L = C), determine the optimal allocation of capital K* and labor L*, and compute the resulting maximum production output Q*.

  1. AMaximum production output is 48,200 units (Optimal allocation K = 750, L = 1,000)
  2. BMaximum production output is 51,350 units (Optimal allocation K = 500, L = 1,333)
  3. CMaximum production output is 54,566 units (Optimal allocation K = 600, L = 1,200)correct
  4. DMaximum production output is 45,100 units (Optimal allocation K = 900, L = 800)
Show the solution

**Step 1: Formulate the Lagrangian Function** Objective function: $Q(K, L) = 60 K^{0.4} L^{0.6}$ Budget constraint: $g(K, L) = 40 K + 30 L = 60{,}000$ $$\mathcal{L}(K, L, \lambda) = 60 K^{0.4} L^{0.6} - \lambda (40 K + 30 L - 60{,}000)$$ **Step 2: Take Partial Derivatives and Set to Zero** $$\frac{\partial \mathcal{L}}{\partial K} = 60(0.4) K^{-0.6} L^{0.6} - 40 \lambda = 0 \implies 24 \left(\frac{L}{K}\right)^{0.6} = 40 \lambda$$ $$\frac{\partial \mathcal{L}}{\partial L} = 60(0.6) K^{0.4} L^{-0.4} - 30 \lambda = 0 \implies 36 \left(\frac{K}{L}\right)^{0.4} = 30 \lambda$$ Equating expressions for $\lambda$: $$\lambda = \frac{24}{40} \left(\frac{L}{K}\right)^{0.6} = \frac{36}{30} \left(\frac{K}{L}\right)^{0.4}$$ $$0.60 \left(\frac{L}{K}\right)^{0.6} = 1.20 \left(\frac{K}{L}\right)^{0.4}$$ Divide both sides by $0.60$ and multiply by $\left(\frac{L}{K}\right)^{0.4}$: $$\left(\frac{L}{K}\right)^{0.6} \left(\frac{L}{K}\right)^{0.4} = 2.0 \implies \frac{L}{K} = 2.0 \implies L = 2 K$$ **Step 3: Solve for Optimal Inputs Using Budget Constraint** Substitute $L = 2 K$ into the budget constraint: $$40 K + 30(2 K) = 60{,}000$$ $$40 K + 60 K = 100 K = 60{,}000 \implies K^* = 600\text{ capital units}$$ $$L^* = 2(600) = 1{,}200\text{ labor-hours}$$ Verification: $40(600) + 30(1{,}200) = 24{,}000 + 36{,}000 = \text{USD } 60{,}000$. **Step 4: Compute Maximum Production Output ($Q^*$)** $$Q^* = 60 \cdot (600)^{0.4} \cdot (1{,}200)^{0.6}$$ $$(600)^{0.4} = 12.8228, \quad (1{,}200)^{0.6} = 70.9200$$ $$Q^* = 60 \times 12.8228 \times 70.9200 = 54{,}565.8 \approx 54{,}566\text{ units}$$ Conclusion: Optimal inputs are **K = 600**, **L = 1,200** with maximum output of **54,566 units**.

Problem 2

Two discrete quality metrics X and Y of an injection-molded polymer bracket follow the joint probability mass function P(X=x, Y=y): • (X=1, Y=1): 0.10 • (X=1, Y=2): 0.20 • (X=1, Y=3): 0.10 • (X=2, Y=1): 0.15 • (X=2, Y=2): 0.05 • (X=2, Y=3): 0.40 What is the population covariance Cov(X, Y) between the two quality characteristics?

  1. A0.30 covariance (Computed without subtracting marginal cross-product)
  2. B-0.15 covariance (Assuming negative correlation)
  3. C0.10 covariance (E[XY] = 3.70, E[X] = 1.60, E[Y] = 2.25)correct
  4. D0.25 covariance (Arithmetic difference of means)
Show the solution

**Step 1: Compute Marginal Probability Distributions of X and Y** From the FE Reference Handbook (Probability & Statistics): Marginal distribution for $X$: $$P(X=1) = 0.10 + 0.20 + 0.10 = 0.40$$ $$P(X=2) = 0.15 + 0.05 + 0.40 = 0.60$$ Expected value $E[X]$: $$E[X] = 1(0.40) + 2(0.60) = 0.40 + 1.20 = 1.60$$ Marginal distribution for $Y$: $$P(Y=1) = 0.10 + 0.15 = 0.25$$ $$P(Y=2) = 0.20 + 0.05 = 0.25$$ $$P(Y=3) = 0.10 + 0.40 = 0.50$$ Expected value $E[Y]$: $$E[Y] = 1(0.25) + 2(0.25) + 3(0.50) = 0.25 + 0.50 + 1.50 = 2.25$$ **Step 2: Compute Joint Expectation E[XY]** $$E[XY] = \sum_{x} \sum_{y} x \cdot y \cdot P(X=x, Y=y)$$ $$E[XY] = (1)(1)(0.10) + (1)(2)(0.20) + (1)(3)(0.10) + (2)(1)(0.15) + (2)(2)(0.05) + (2)(3)(0.40)$$ $$E[XY] = 0.10 + 0.40 + 0.30 + 0.30 + 0.20 + 2.40 = 3.70$$ **Step 3: Calculate Covariance Cov(X, Y)** $$\text{Cov}(X, Y) = E[XY] - E[X] \cdot E[Y]$$ $$\text{Cov}(X, Y) = 3.70 - (1.60 \times 2.25) = 3.70 - 3.60 = +0.10$$ Conclusion: The covariance is **0.10** (Option C).

Problem 3

Evaluate the determinant of the $3 \times 3$ coordinate transformation matrix $\mathbf{A}$ utilized in an automated robotic kinematics simulation: $$\mathbf{A} = \begin{bmatrix} 3 & -2 & 4 \\ 1 & 5 & -1 \\ 2 & 0 & 6 \end{bmatrix}$$ (Enter numerical value):

Show the solution

Step 1: Expand the determinant along the third row to exploit the zero entry: $$\det(\mathbf{A}) = a_{31} C_{31} + a_{32} C_{32} + a_{33} C_{33}$$ $$\det(\mathbf{A}) = 2 \cdot (-1)^{3+1} M_{31} + 0 + 6 \cdot (-1)^{3+3} M_{33} = 2 M_{31} + 6 M_{33}$$ Step 2: Evaluate the $2 \times 2$ minor determinant $M_{31}$: $$M_{31} = \det\begin{bmatrix} -2 & 4 \\ 5 & -1 \end{bmatrix} = (-2)(-1) - (4)(5) = 2 - 20 = -18$$ Step 3: Evaluate the $2 \times 2$ minor determinant $M_{33}$: $$M_{33} = \det\begin{bmatrix} 3 & -2 \\ 1 & 5 \end{bmatrix} = (3)(5) - (-2)(1) = 15 - (-2) = 15 + 2 = 17$$ Step 4: Compute the final determinant value: $$\det(\mathbf{A}) = 2(-18) + 6(17) = -36 + 102 = 66$$ Distractor Analysis: - Making a sign error in $(-2)(1)$ yields $M_{33} = 13$, giving $2(-18) + 6(13) = 42$. - Forgetting the negative sign in the expansion of $M_{31}$ yields $+18$, giving $36 + 102 = 138$.

Find out where you actually stand

A free 20-question diagnostic across every FE Industrial and Systems knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Mathematics is where your time should go at all.

Start the free Industrial & Systems diagnostic

Retaking the FE Industrial and Systems exam?

Copy the scores from your NCEES diagnostic report and see whether Mathematics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Industrial and Systems knowledge areas

Mathematics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.