ExamPass EngineeringExamPass Engineering Start free
FE Civil · Knowledge area 4 of 18

Mathematics on the FE Civil exam

Mathematics accounts for 8 of the 110 questions — 7.3% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions8
Share of exam7.3%
Rank by weight4/18
In our bank27

What Mathematics covers

On the FE Civil exam this area covers algebra and trigonometry, analytic geometry, vectors, matrix and determinant operations, differential and integral calculus, differential equations, and numerical methods.

What the questions look like: Short, self-contained computations: a determinant, a derivative evaluated at a point, the area under a curve, a dot or cross product, or the root of an equation by Newton’s method.

Worth knowing cold: These are the cheapest points on the exam and the fastest to lose. Practise them until they take under a minute each, because the time you save here is time you spend on the long discipline questions.

3 free Mathematics practice problems

These come from our FE Civil bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A 5 m ladder leans against a vertical wall. The bottom of the ladder slides away from the wall at a constant rate of 0.5 m/s. At the instant the bottom of the ladder is 3 m from the wall, how fast is the top of the ladder sliding down?

Show the solution

Let x be the distance from the wall to the base and y the height of the top, with x²+y²=5² (the ladder length is constant). At x = 3 m: y = √(25−9) = √16 = 4 m. Differentiate the constraint with respect to time: 2x(dx/dt) + 2y(dy/dt) = 0 → dy/dt = −(x/y)(dx/dt). dy/dt = −(3/4)(0.5) = −0.375 m/s. The negative sign indicates the top is moving downward, so the speed is 0.375 m/s. Sanity check: as the base approaches the wall (x→0), the top barely moves (dy/dt→0); as the base moves far from the wall (x→5, y→0), the top's descent rate would blow up toward infinity — the moderate value of 0.375 m/s at this middling position (x=3, y=4) sits reasonably between those two extremes.

Problem 2

A stiffness matrix is $\mathbf{K} = \begin{bmatrix} 6 & -2 \\ -2 & 3 \end{bmatrix}$. The eigenvector associated with its SMALLER eigenvalue can be written as $\mathbf{v} = (1, k)$. The value of $k$ is:

Show the solution

Step 1: Characteristic equation $\det(\mathbf{K} - \lambda\mathbf{I}) = 0$: $$(6-\lambda)(3-\lambda) - (-2)(-2) = 0$$ $$\lambda^2 - 9\lambda + 18 - 4 = \lambda^2 - 9\lambda + 14 = 0$$ Step 2: Roots: $$(\lambda - 7)(\lambda - 2) = 0 \implies \lambda_1 = 2, \; \lambda_2 = 7$$ The smaller eigenvalue is $\lambda = 2$. Step 3: Eigenvector for $\lambda = 2$, from the first row of $(\mathbf{K} - 2\mathbf{I})\mathbf{v} = 0$: $$(6 - 2)(1) + (-2)k = 0 \implies 4 - 2k = 0 \implies k = 2$$ Step 4: Check with the second row: $-2(1) + (3 - 2)(2) = -2 + 2 = 0$. Confirmed, $\mathbf{v} = (1, 2)$. Distractor Analysis: - Option A (-2.0) gets the sign wrong in Step 3. - Option B (-0.5) is the eigenvector of the LARGER eigenvalue $\lambda = 7$: $-1 - 2k = 0$. - Option C (0.5) inverts the ratio, writing the vector as $(k, 1)$.

Problem 3

A geotechnical excavation plane passes through the origin $(0, 0, 0)$ and contains the two surface vectors $\mathbf{u} = (2, 1, -1)$ and $\mathbf{v} = (1, 3, 1)$. A normal vector to this plane with a positive z-component is:

  1. A(4, -3, 5)correct
  2. B(-4, 3, 5)
  3. C(4, 3, -5)
  4. D(2, -3, 5)
Show the solution

Step 1: Compute the cross product $\mathbf{n} = \mathbf{u} \times \mathbf{v}$ using the 3x3 determinant definition: $$\mathbf{n} = \begin{vmatrix} \mathbf{i} & \mathbf{j} & \mathbf{k} \\ 2 & 1 & -1 \\ 1 & 3 & 1 \end{vmatrix}$$ Step 2: Expand along the first row: $$n_x = (1)(1) - (-1)(3) = 1 - (-3) = 4$$ $$n_y = -\left[ (2)(1) - (-1)(1) \right] = -[2 + 1] = -3$$ $$n_z = (2)(3) - (1)(1) = 6 - 1 = 5$$ $$\mathbf{n} = (4, -3, 5)$$ Step 3: Check the sign condition and orthogonality: The question requires a positive z-component: $n_z = 5 > 0$, so no sign inversion is needed. Verify orthogonality via dot product with $\mathbf{u}$: $$\mathbf{n} \cdot \mathbf{u} = (4)(2) + (-3)(1) + (5)(-1) = 8 - 3 - 5 = 0$$ Verify orthogonality with $\mathbf{v}$: $$\mathbf{n} \cdot \mathbf{v} = (4)(1) + (-3)(3) + (5)(1) = 4 - 9 + 5 = 0$$ Thus, $(4, -3, 5)$ is strictly normal to the excavation plane. Distractor Analysis: - Option B (-4, 3, 5) applies inconsistent signs to the cofactor expansion. - Option C (4, 3, -5) fails the positive z-component requirement. - Option D (2, -3, 5) makes an arithmetic subtraction error in the i-component: $1 - 3 = -2$.

Find out where you actually stand

A free 20-question diagnostic across every FE Civil knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Mathematics is where your time should go at all.

Start the free Civil diagnostic

Retaking the FE Civil exam?

Copy the scores from your NCEES diagnostic report and see whether Mathematics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Civil knowledge areas

Mathematics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.