ExamPass EngineeringExamPass Engineering Start free
FE Other Disciplines · Knowledge area 2 of 14

Statics on the FE Other Disciplines exam

Statics accounts for 10 of the 110 questions — 9.1% of your exam. It is one of the three heaviest areas on this paper, so it is worth your study time before almost anything else.

Questions10
Share of exam9.1%
Rank by weight2/14
In our bank34

What Statics covers

On the FE Other Disciplines exam this area covers resultants of force systems, equilibrium of rigid bodies, trusses and frames, centroids and moments of inertia, and friction.

What the questions look like: A reaction at a support, a member force in a truss by joints or sections, a centroid of a composite area, or a block on the verge of sliding.

Worth knowing cold: Free-body diagrams are not optional. Drawing one properly turns most of these into two equations and a division.

3 free Statics practice problems

These come from our FE Other Disciplines bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A symmetrical pin-jointed plane Warren bridge truss with verticals spans $L = 16.0\text{ m}$ and has a uniform panel width of $d = 4.00\text{ m}$ (4 equal panels) with a vertical height of $h = 3.00\text{ m}$. The bottom chord joints are $A(0,0)$, $B(4,0)$, $C(8,0)$, $D(12,0)$, and $E(16,0)$, supported by a pin at $A$ and a roller at $E$. The top chord joints are $F(4,3)$, $G(8,3)$, and $H(12,3)$. Vertical concentrated downward loads are applied at the lower roadway deck: - At joint $B$: $P_1 = 40.0\text{ kN}$ - At joint $C$: $P_2 = 60.0\text{ kN}$ - At joint $D$: $P_3 = 40.0\text{ kN}$ Using the Method of Sections, pass an imaginary vertical cut through members $GH$, $CH$, and $CD$. What is the internal axial force in the top chord member $GH$?

  1. A133.3 kN (compression, with diagonal member CH carrying 50.0 kN tension)correct
  2. B66.7 kN (half load error)
  3. C200.0 kN (overestimated moment arm)
  4. D100.0 kN (omitting node D load)
Show the solution

**Step 1: Calculate Global Support Reactions** From the FE Reference Handbook (Statics / Trusses / Method of Sections): Due to symmetry of truss geometry and external loads about the centerline through joint $C$: $$R_{Ay} = R_{Ey} = \frac{P_1 + P_2 + P_3}{2} = \frac{40.0 + 60.0 + 40.0}{2} = 70.0\text{ kN}$$ Horizontal reaction at pin $A$: $R_{Ax} = 0$. **Step 2: Apply the Method of Sections** Pass a cutting section through members $GH$, $CH$, and $CD$, and isolate the right-hand free body of the truss (containing joints $D$, $E$, and $H$): External forces acting on this isolated right segment: - Roller reaction at $E$: $R_{Ey} = 70.0\text{ kN}$ (upward at $x = 16.00\text{ m}, y = 0$) - Roadway deck load at $D$: $P_3 = 40.0\text{ kN}$ (downward at $x = 12.00\text{ m}, y = 0$) - Internal member forces exposed at cut: $F_{GH}$ (acting at $H(12,3)$), $F_{CH}$, and $F_{CD}$ (acting at $D(12,0)$). **Step 3: Solve for $F_{GH}$ using Moment Equilibrium about Joint $C(8,0)$** Both $F_{CH}$ and $F_{CD}$ pass through joint $C$, so their moments about $C$ are zero. Summing counterclockwise moments about $C$ (assuming $F_{GH}$ is in compression, directed leftward toward $G$): $$\sum M_C = 0 \implies F_{GH} (h) + P_3 (x_D - x_C) - R_{Ey} (x_E - x_C) = 0$$ $$F_{GH} (3.00\text{ m}) + 40.0\text{ kN} (12.00 - 8.00\text{ m}) - 70.0\text{ kN} (16.00 - 8.00\text{ m}) = 0$$ $$3.00 F_{GH} + 160.0\text{ kN}\cdot\text{m} - 560.0\text{ kN}\cdot\text{m} = 0$$ $$3.00 F_{GH} = 400.0\text{ kN}\cdot\text{m} \implies F_{GH} = 133.33\text{ kN (Compression)}$$ **Step 4: Verify Diagonal Member $F_{CH}$** Diagonal $CH$ has length $L = \sqrt{4^2 + 3^2} = 5.00\text{ m}$ with $\sin\theta = 3/5 = 0.600$. $$\sum F_y = 0 \implies R_{Ey} - P_3 - F_{CH}\sin\theta = 0 \implies 70.0 - 40.0 - 0.600 F_{CH} = 0 \implies F_{CH} = 50.0\text{ kN (Tension)}$$ Conclusion: The axial force in top chord member $GH$ is **$133.3\text{ kN (Compression)}$**.

Problem 2

A bent structural pipe assembly $ABC$ is rigidly fixed to an immovable wall at the coordinate origin $A(0, 0, 0)$. Segment $AB$ extends of length $L_1 = 1.20\text{ m}$ horizontally along the positive $y$-axis to joint $B(0, 1.20\text{ m}, 0)$, while vertical arm $BC$ extends of height $L_2 = 0.80\text{ m}$ parallel to the positive $z$-axis to terminal tip $C(0, 1.20\text{ m}, 0.80\text{ m})$. An oblique concentrated point load $\mathbf{F} = (150\mathbf{i} - 200\mathbf{j} + 300\mathbf{k})\text{ N}$ is applied at tip $C$. Refer to the accompanying technical diagram [FE-OTHER-409]. What is the magnitude of the resultant reaction moment $|\mathbf{M}_A|$ developed at the fixed support $A$ to maintain static equilibrium?

  1. A563 N*m (resultant reaction moment at fixed support A)correct
  2. B412 N*m (considering only y and z load moment components)
  3. C685 N*m (scalar sum of moment components without vector cross product)
  4. D320 N*m (moment produced purely by the vertical 300 N load)
Show the solution

Step 1: Identify coordinates and formulate the position vector $\mathbf{r}_{A \to C}$: Support origin: $A(0, 0, 0)$ Joint $B$: $(0, 1.20\text{ m}, 0)$ Loaded tip $C$: $(0, 1.20\text{ m}, 0.80\text{ m})$ $$\mathbf{r}_{A \to C} = (0 - 0)\mathbf{i} + (1.20 - 0)\mathbf{j} + (0.80 - 0)\mathbf{k} = 1.20\mathbf{j} + 0.80\mathbf{k}\text{ m}$$ Step 2: Formulate the vector cross-product for the moment exerted by force $\mathbf{F}$: $$\mathbf{F} = 150\mathbf{i} - 200\mathbf{j} + 300\mathbf{k}\text{ N}$$ $$\mathbf{M}_{\text{load}} = \mathbf{r}_{A \to C} \times \mathbf{F} = \begin{vmatrix} \mathbf{i} & \mathbf{j} & \mathbf{k} \\ 0 & 1.20 & 0.80 \\ 150 & -200 & 300 \end{vmatrix}$$ Step 3: Evaluate individual scalar components: $$M_x = (1.20)(300) - (0.80)(-200) = 360.0 - (-160.0) = +520.0\text{ N}\cdot\text{m}$$ $$M_y = -\left[(0)(300) - (0.80)(150)\right] = -[0 - 120.0] = +120.0\text{ N}\cdot\text{m}$$ $$M_z = (0)(-200) - (1.20)(150) = 0 - 180.0 = -180.0\text{ N}\cdot\text{m}$$ $$\mathbf{M}_{\text{load}} = 520.0\mathbf{i} + 120.0\mathbf{j} - 180.0\mathbf{k}\text{ N}\cdot\text{m}$$ Step 4: Apply static equilibrium $\sum \mathbf{M}_A = \mathbf{0}$: $$\mathbf{M}_A + \mathbf{M}_{\text{load}} = \mathbf{0} \implies \mathbf{M}_A = -520.0\mathbf{i} - 120.0\mathbf{j} + 180.0\mathbf{k}\text{ N}\cdot\text{m}$$ Step 5: Compute the magnitude of the resultant base reaction moment: $$|\mathbf{M}_A| = \sqrt{(-520.0)^2 + (-120.0)^2 + (180.0)^2}$$ $$|\mathbf{M}_A| = \sqrt{270{,}400 + 14{,}400 + 32{,}400} = \sqrt{317{,}200} = 563.20\text{ N}\cdot\text{m} \approx 563\text{ N}\cdot\text{m}$$ Therefore, the magnitude of the fixed support reaction moment is 563 N*m (option A).

Problem 3

A heavy synthetic mooring hawser line is wrapped n = 2.50 complete turns around a fixed vertical dock capstan bollard (total angle of contact beta = 2.50 * 2*pi = 5*pi rad = 15.71 rad). The static friction coefficient between the hawser and the steel bollard is mu_s = 0.250. A mooring vessel exerts a surging tension force of T2 = 50.0 kN on the line. Using the capstan belt friction equation, determine the minimum holding tension T1 (in N) that a dockworker must exert on the slack side to hold the vessel and prevent the line from slipping. Express your answer to three significant figures.

Show the solution

Step 1 - Capstan Belt Friction Equation: To prevent slipping when the high-tension side carries $T_2 = 50.0\text{ kN} = 50,000\text{ N}$: $$T_1 = T_2 e^{-\mu_s \beta}$$ Step 2 - Determine Total Contact Angle $\beta$ in Radians: Each full turn around the bollard equals $2\pi\text{ radians}$: $$\beta = 2.50\text{ turns} \times 2\pi\text{ rad/turn} = 5\pi\text{ rad} = 15.7080\text{ radians}$$ Step 3 - Evaluate the Exponential Friction Decoupling Factor: $$\mu_s \beta = 0.250 \times 15.7080 = 3.92699$$ $$e^{-\mu_s \beta} = e^{-3.92699} = 0.019703$$ Step 4 - Calculate Required Holding Force $T_1$: $$T_1 = 50,000\text{ N} \times 0.019703 = 985.15\text{ N} \approx 985\text{ N}$$ T1 = 985 N.

Find out where you actually stand

A free 20-question diagnostic across every FE Other Disciplines knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Statics is where your time should go at all.

Start the free Other Disciplines diagnostic

Retaking the FE Other Disciplines exam?

Copy the scores from your NCEES diagnostic report and see whether Statics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Other Disciplines knowledge areas

Statics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.