ExamPass EngineeringExamPass Engineering Start free
FE Mechanical · Knowledge area 5 of 14

Statics on the FE Mechanical exam

Statics accounts for 10 of the 110 questions — 9.1% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions10
Share of exam9.1%
Rank by weight5/14
In our bank34

What Statics covers

On the FE Mechanical exam this area covers resultants of force systems, equilibrium of rigid bodies, trusses and frames, centroids and moments of inertia, and friction.

What the questions look like: A reaction at a support, a member force in a truss by joints or sections, a centroid of a composite area, or a block on the verge of sliding.

Worth knowing cold: Free-body diagrams are not optional. Drawing one properly turns most of these into two equations and a division.

3 free Statics practice problems

These come from our FE Mechanical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A horizontal beam is supported by a pin at A and a roller at B, 8.0 m apart. A downward point load of 15 kN acts 3.0 m from A. What is the reaction at B, in kN? Enter a number only.

Show the solution

A statically determinate beam: the two reactions come straight from the equilibrium equations, no deflection needed. Take moments about A, which eliminates the unknown reaction there: sum M_A = 0: R_B(8.0) - 15(3.0) = 0 R_B = 45 / 8.0 = 5.625 kN Check with vertical equilibrium: the total load is 15 kN, so R_A = 15 - 5.625 = 9.375 kN. Taking moments about B independently gives R_A = 15(8.0-3.0)/8.0 = 75/8.0 = 9.375 kN, which agrees. R_A is the larger of the two, as it should be: the load sits closer to A, so A carries more of it. A fill-in question like this one is exactly where a multiple-choice format would have given away information -- seeing four candidate numbers lets you sanity-check magnitude before calculating; here you have to trust the method and the arithmetic all the way through, which is closer to what the real exam increasingly asks for.

Problem 2

A machine block of total weight $W = 20.0\text{ kN}$ rests against a vertical guide wall. A wedge with taper angle $\alpha = 10.0^\circ$ is driven horizontally beneath the block to raise it. The coefficient of static friction at all contact surfaces (between wedge and floor, wedge and block, and block and wall) is $\mu_s = 0.250$ (static friction angle $\phi_s = \tan^{-1}(\mu_s) = 14.036^\circ$). In accordance with dry Coulomb wedge friction equilibrium from the NCEES FE Reference Handbook ($P = W \tan(\alpha + 2\phi_s)$), the minimum horizontal force $P$ required to begin raising the block is most nearly:

  1. A9.8 kN
  2. B15.7 kNcorrect
  3. C21.4 kN
  4. D28.5 kN
Show the solution

Step 1: Determine the angle of static friction ($\phi_s$): $$\phi_s = \tan^{-1}(\mu_s) = \tan^{-1}(0.250) = 14.036^\circ$$ Step 2: Combine wedge taper angle and friction angles: $$\theta_{total} = \alpha + 2\phi_s = 10.00^\circ + 2(14.036^\circ) = 10.00^\circ + 28.072^\circ = 38.072^\circ$$ Step 3: Calculate the required horizontal drive force ($P$): $$P = W \tan(\alpha + 2\phi_s) = (20.0\text{ kN}) \times \tan(38.072^\circ)$$ $$\tan(38.072^\circ) = 0.78328$$ $$P = 20.0\text{ kN} \times 0.78328 = 15.666\text{ kN} = 15.7\text{ kN}$$ Distractor Analysis: - Option A: Considers friction only at the wedge-block interface ($alpha + phi_s = 24.04^circ implies P = 8.9\text{ kN}$). - Option B: Correct. - Option C: Assumes frictionless wall ($P = 21.4\text{ kN}$ with incorrect normal decomposition). - Option D: Adds friction forces algebraically without resolving directional reaction vectors.

Problem 3

A 90° bell-crank lever is pivoted at frictionless pin O. The horizontal lever arm OA has length $L_1 = 440.0\text{ mm} = 0.440\text{ m}$, and the vertical lever arm OB has length $L_2 = 320.0\text{ mm} = 0.320\text{ m}$. A vertical downward point load $F_A = 6.00\text{ kN}$ acts at tip A. A horizontal actuating force $F_B$ acts to the left at tip B to maintain static equilibrium. In accordance with static moment equilibrium from the NCEES FE Reference Handbook ($\sum M_O = 0$, $R_O = \sqrt{R_{Ox}^2 + R_{Oy}^2}$), the required actuating force ($F_B$, in kN) and the total resultant pin reaction force at O ($R_O$, in kN) are:

  1. AF_B = 4.36 kN, R_O = 7.42 kN
  2. BF_B = 8.25 kN, R_O = 10.2 kNcorrect
  3. CF_B = 10.5 kN, R_O = 12.8 kN
  4. DF_B = 12.0 kN, R_O = 14.5 kN
Show the solution

Step 1: Apply moment equilibrium about pivot pin O ($\sum M_O = 0$): $$F_A L_1 - F_B L_2 = 0$$ $$(6.00\text{ kN})(0.440\text{ m}) - F_B (0.320\text{ m}) = 0$$ $$2.640\text{ kN}\cdot\text{m} = 0.320 F_B \implies F_B = \frac{2.640}{0.320} = 8.250\text{ kN} = 8.25\text{ kN}$$ Step 2: Calculate horizontal and vertical reaction components at pin O: $$\sum F_x = 0 \implies R_{Ox} - F_B = 0 \implies R_{Ox} = 8.250\text{ kN (to the right)}$$ $$\sum F_y = 0 \implies R_{Oy} - F_A = 0 \implies R_{Oy} = 6.000\text{ kN (upward)}$$ Step 3: Determine the resultant pin reaction force ($R_O$): $$R_O = \sqrt{R_{Ox}^2 + R_{Oy}^2} = \sqrt{(8.250\text{ kN})^2 + (6.000\text{ kN})^2}$$ $$R_O = \sqrt{68.0625 + 36.000} = \sqrt{104.0625} = 10.201\text{ kN} = 10.2\text{ kN}$$ Distractor Analysis: - Option A: Inverts the lever arm ratio ($6.0 \times 320 / 440 = 4.36\text{ kN}$). - Option B: Correct. - Option C: Adds the forces algebraically ($6.0 + 8.25 = 14.25$ scaled). - Option D: Assumes equal lever arms.

Find out where you actually stand

A free 20-question diagnostic across every FE Mechanical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Statics is where your time should go at all.

Start the free Mechanical diagnostic

Retaking the FE Mechanical exam?

Copy the scores from your NCEES diagnostic report and see whether Statics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Mechanical knowledge areas

Statics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.