ExamPass EngineeringExamPass Engineering Start free
FE Mechanical · Knowledge area 7 of 14

Material Properties and Processing on the FE Mechanical exam

Material Properties and Processing accounts for 8 of the 110 questions — 7.3% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions8
Share of exam7.3%
Rank by weight7/14
In our bank27

What Material Properties and Processing covers

On the FE Mechanical exam this area covers crystal structure, phase diagrams and the lever rule, heat treatment, mechanical testing and properties, failure and fatigue, corrosion, and manufacturing processes.

What the questions look like: A lever-rule composition, a hardness or strength comparison, or the effect of a heat treatment on a property.

Worth knowing cold: Link every property question to a mechanism. Remembering why a treatment raises hardness is faster than memorising which ones do.

3 free Material Properties and Processing practice problems

These come from our FE Mechanical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A metal bar 2.0 m long is heated from 20 degrees C to 95 degrees C. Its coefficient of linear thermal expansion is 11 x 10^-6 per degree C. If the bar is free to expand, what is its change in length, in mm? Enter a number only.

Show the solution

For a bar free to expand (no restraint at either end, unlike a bar pinned between rigid supports), the change in length follows directly from the linear expansion relation: delta_L = alpha L (delta T) Temperature change: delta_T = 95 - 20 = 75 degrees C Substitute, keeping length in meters so the result comes out in meters first: delta_L = (11e-6)(2.0)(75) = 1.65e-3 m = 1.65 mm No stress develops in this bar at all, which is the point of specifying that it is free to expand: stress from thermal expansion only arises when something prevents the material from reaching its natural expanded length, such as rigid supports at both ends. A bar free to move simply gets longer, with the length change proportional to how long it started, how much the temperature changed, and a material property that does not depend on either -- which is why coefficient of thermal expansion is tabulated per material, independent of part size.

Problem 2

In materials degradation and corrosion science from the NCEES FE Reference Handbook, select ALL statements that accurately describe electrochemical corrosion phenomena.

  1. AGalvanic corrosion occurs when two electrochemically dissimilar metals are electrically coupled in an electrolyte, accelerating oxidation of the more active (anodic) metal.
  2. BPitting corrosion is an extremely localized form of corrosive attack that produces deep cavities or holes while the bulk metal surface remains largely unaffected.
  3. CStress corrosion cracking (SCC) requires the simultaneous presence of a tensile stress and a specific corrosive environment.
  4. DIn a galvanic couple, the more noble (cathodic) metal corrodes preferentially to protect the active metal.
Show the solution

Step 1: Define galvanic corrosion (Option A): In a galvanic couple, the anode has the more negative reduction potential and corrodes preferentially, supplying electrons to the cathode. (Option A is TRUE). Step 2: Define pitting corrosion (Option B): Pitting is an insidious localized autocatalytic breakdown of protective passive oxide films (e.g., on stainless steel in chloride environments). (Option B is TRUE). Step 3: Define stress corrosion cracking (Option C): SCC is a failure mechanism resulting from the synergistic combination of static tensile stress (applied or residual) and a specific corrosive chemical environment. (Option C is TRUE). Step 4: Evaluate cathodic sacrificial behavior (Option D): The active (anodic) metal undergoes sacrificial oxidation to protect the noble (cathodic) metal, not vice versa. (Option D is FALSE). Distractor Analysis: - Option D inverts anode and cathode roles in galvanic protection.

Problem 3

For the molecular structure and mechanical behavior of polymers from the NCEES FE Reference Handbook, select ALL statements that are scientifically TRUE.

  1. AThermoplastics consist of linear or branched macromolecular chains held together by weak secondary intermolecular bonds, allowing them to soften reversibly upon heating and solidify upon cooling.
  2. BThermosetting polymers undergo irreversible chemical cross-linking curing reactions, forming permanent three-dimensional network structures that do not melt upon reheating.
  3. CThe glass transition temperature Tg defines the reversible transition in amorphous polymers from a rigid, brittle glassy state at low temperatures to a flexible, rubbery state at elevated temperatures.
  4. DExtensive molecular cross-linking between polymer backbone chains increases macromolecular mobility and lowers mechanical modulus and yield strength.
Show the solution

Step 1: Evaluate thermoplastic classification (Option A): Linear/branched chains with secondary bonding allow repeated thermal reprocessing. (Option A is TRUE). Step 2: Evaluate thermoset classification (Option B): Covalent cross-linking produces thermosets like epoxies and phenolics that char rather than melt upon heating. (Option B is TRUE). Step 3: Evaluate glass transition behavior (Option C): $T_g$ corresponds to the onset of long-range coordinated segmental chain motion in amorphous polymers. (Option C is TRUE). Step 4: Evaluate cross-linking influence (Option D): Cross-linking restricts chain sliding, thereby INCREASING stiffness and tensile strength while reducing ductility, not lowering it. (Option D is FALSE). Distractor Analysis: - Option D contradicts fundamental polymer viscoelastic mechanics.

Find out where you actually stand

A free 20-question diagnostic across every FE Mechanical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Material Properties and Processing is where your time should go at all.

Start the free Mechanical diagnostic

Retaking the FE Mechanical exam?

Copy the scores from your NCEES diagnostic report and see whether Material Properties and Processing is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Mechanical knowledge areas