ExamPass EngineeringExamPass Engineering Start free
FE Mechanical · Knowledge area 3 of 14

Thermodynamics on the FE Mechanical exam

Thermodynamics accounts for 11 of the 110 questions — 10.0% of your exam. It is one of the three heaviest areas on this paper, so it is worth your study time before almost anything else.

Questions11
Share of exam10.0%
Rank by weight3/14
In our bank38

What Thermodynamics covers

On the FE Mechanical exam this area covers properties of pure substances, ideal and real gases, the first and second laws, closed and open systems, power and refrigeration cycles, entropy, and mixtures.

What the questions look like: An energy balance on a control volume, a cycle efficiency, or a property read from the steam tables.

Worth knowing cold: Identify the system boundary and whether it is closed or open before writing anything. That single decision determines which form of the first law applies.

3 free Thermodynamics practice problems

These come from our FE Mechanical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

An ideal gas occupies 2.0 m^3 at 300 kPa and 350 K. It is compressed at constant temperature to a pressure of 750 kPa. What is the resulting volume, in m^3? Enter a number only.

Show the solution

Constant temperature means this is governed by Boyle Law, which holds for an ideal gas at fixed T regardless of what the temperature value actually is -- 350 K never enters the calculation, it is only there to establish that the process is isothermal. p_1 V_1 = p_2 V_2 (300 kPa)(2.0 m^3) = (750 kPa)(V_2) V_2 = 600 / 750 = 0.8 m^3 The volume shrank to 0.8 m^3, a reduction to 40% of the original 2.0 m^3, consistent with the pressure having risen by a factor of 2.5 (300 to 750) -- pressure and volume move in inverse proportion at fixed temperature, so a 2.5x pressure increase means a volume of 2.0/2.5 = 0.8 m^3, which matches and is a fast way to sanity-check the arithmetic without redoing it from scratch.

Problem 2

An ideal vapor-compression refrigeration cycle operating with refrigerant R-134a circulates mass flow rate $\dot{m} = 0.0800\text{ kg/s}$. Saturated vapor enters the compressor at evaporator temperature $T_{evap} = -10.0^\circ\text{C}$ ($h_1 = 244.5\text{ kJ/kg}$, $s_1 = 0.9377\text{ kJ}/(\text{kg}\cdot\text{K})$). Isentropic compression to condenser pressure $P_{cond} = 1.00\text{ MPa}$ ($10.0\text{ bar}$) yields superheated vapor at $h_2 = 282.5\text{ kJ/kg}$. Saturated liquid leaves the condenser at $1.00\text{ MPa}$ with $h_3 = 107.3\text{ kJ/kg}$ and expands isenthalpically through a throttle valve ($h_4 = h_3$). In accordance with refrigeration cycle relationships from the NCEES FE Reference Handbook ($q_{in} = h_1 - h_4$, $w_c = h_2 - h_1$, $COP_R = q_{in}/w_c$), the coefficient of performance ($COP_R$) and cooling capacity ($\dot{Q}_{in}$, in kW) are most nearly:

  1. A2.45, Q_in = 7.45 kW
  2. B3.61, Q_in = 10.98 kWcorrect
  3. C4.82, Q_in = 14.65 kW
  4. D5.50, Q_in = 16.72 kW
Show the solution

Step 1: Calculate specific refrigeration capacity ($q_{in}$) and cooling load ($\dot{Q}_{in}$): $$q_{in} = h_1 - h_4 = 244.5\text{ kJ/kg} - 107.3\text{ kJ/kg} = 137.2\text{ kJ/kg}$$ $$\dot{Q}_{in} = \dot{m} q_{in} = (0.0800\text{ kg/s}) \times (137.2\text{ kJ/kg}) = 10.976\text{ kW} = 10.98\text{ kW}$$ Step 2: Calculate specific compressor work ($w_c$) and compressor power input ($\dot{W}_c$): $$w_c = h_2 - h_1 = 282.5\text{ kJ/kg} - 244.5\text{ kJ/kg} = 38.0\text{ kJ/kg}$$ $$\dot{W}_c = \dot{m} w_c = (0.0800\text{ kg/s}) \times (38.0\text{ kJ/kg}) = 3.040\text{ kW}$$ Step 3: Determine the coefficient of performance ($COP_R$): $$COP_R = \frac{q_{in}}{w_c} = \frac{137.2\text{ kJ/kg}}{38.0\text{ kJ/kg}} = 3.6105 = 3.61$$ Distractor Analysis: - Option A: Uses heat pump coefficient or assumes compressor isentropic efficiency $\eta = 0.70$. - Option B: Correct. - Option C: Uses Carnot cycle efficiency between evaporator and condenser temperatures. - Option D: Neglects enthalpy of liquid entering throttle valve.

Problem 3

An ideal regenerative Brayton gas turbine cycle operates with air ($c_p = 1.005\text{ kJ}/(\text{kg}\cdot\text{K})$, $k = 1.40$) between pressure limits of $100.0\text{ kPa}$ and $800.0\text{ kPa}$ (pressure ratio $r_p = 8.00$). Ambient air enters the compressor at $T_1 = 300.0\text{ K}$, and gases enter the turbine at $T_3 = 1300.0\text{ K}$. The regenerator has thermal effectiveness $\epsilon_{reg} = 0.750$. In accordance with air-standard regenerative Brayton cycle formulas from the NCEES FE Reference Handbook ($T_2 = T_1 r_p^{(k-1)/k}$, $T_4 = T_3 / r_p^{(k-1)/k}$, $T_x = T_2 + \epsilon_{reg}(T_4 - T_2)$, $\eta_{th} = \frac{w_{net}}{q_{in}}$), the thermal efficiency of the cycle ($\eta_{th}$) is most nearly:

  1. A44.8%
  2. B54.1%correct
  3. C62.5%
  4. D71.0%
Show the solution

Step 1: Compute isentropic temperatures after compression ($T_2$) and expansion ($T_4$): $$\frac{k - 1}{k} = \frac{1.40 - 1.00}{1.40} = 0.285714$$ $$r_p^{(k-1)/k} = (8.00)^{0.285714} = 1.811447$$ $$T_2 = T_1 r_p^{(k-1)/k} = (300.0\text{ K}) \times (1.811447) = 543.434\text{ K}$$ $$T_4 = \frac{T_3}{r_p^{(k-1)/k}} = \frac{1300.0\text{ K}}{1.811447} = 717.658\text{ K}$$ Step 2: Determine preheated temperature entering combustor ($T_x$) via regenerator effectiveness: $$T_x = T_2 + \epsilon_{reg} (T_4 - T_2) = 543.434 + (0.750)(717.658 - 543.434)$$ $$T_x = 543.434 + (0.750)(174.224\text{ K}) = 543.434 + 130.668 = 674.102\text{ K}$$ Step 3: Calculate work outputs, heat addition, and thermal efficiency ($\eta_{th}$): $$w_t = c_p (T_3 - T_4) = (1.005)(1300.0 - 717.658) = (1.005)(582.342) = 585.254\text{ kJ/kg}$$ $$w_c = c_p (T_2 - T_1) = (1.005)(543.434 - 300.0) = (1.005)(243.434) = 244.651\text{ kJ/kg}$$ $$w_{net} = w_t - w_c = 585.254 - 244.651 = 340.603\text{ kJ/kg}$$ $$q_{in} = c_p (T_3 - T_x) = (1.005)(1300.0 - 674.102) = (1.005)(625.898) = 629.027\text{ kJ/kg}$$ $$\eta_{th} = \frac{w_{net}}{q_{in}} = \frac{340.603\text{ kJ/kg}}{629.027\text{ kJ/kg}} = 0.541476 = 54.15\% = 54.1\%$$ Distractor Analysis: - Option A: Evaluates standard Brayton cycle without regenerator ($\eta = 1 - 1/r_p^{0.286} = 44.8\%$). - Option B: Correct. - Option C: Uses ideal regenerator with $\epsilon = 1.00$ ($\eta = 58.2\%$). - Option D: Uses Carnot efficiency between $1300\text{ K}$ and $300\text{ K}$ ($76.9\%$).

Find out where you actually stand

A free 20-question diagnostic across every FE Mechanical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Thermodynamics is where your time should go at all.

Start the free Mechanical diagnostic

Retaking the FE Mechanical exam?

Copy the scores from your NCEES diagnostic report and see whether Thermodynamics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Mechanical knowledge areas

Thermodynamics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.