ExamPass EngineeringExamPass Engineering Start free
FE Mechanical · Knowledge area 1 of 14

Dynamics, Kinematics, and Vibrations on the FE Mechanical exam

Dynamics, Kinematics, and Vibrations accounts for 11 of the 110 questions — 10.0% of your exam. It is one of the three heaviest areas on this paper, so it is worth your study time before almost anything else.

Questions11
Share of exam10.0%
Rank by weight1/14
In our bank38

What Dynamics, Kinematics, and Vibrations covers

On the FE Mechanical exam this area covers particle and rigid-body kinematics, kinetics by force, energy and momentum methods, and free and forced vibration of single-degree-of-freedom systems.

What the questions look like: A natural frequency from mass and stiffness, a damping ratio, or a classical kinetics problem solved by energy methods.

Worth knowing cold: The vibration half is formula-driven and well covered by the Handbook; the kinetics half is where the time goes. Practise both separately.

3 free Dynamics, Kinematics, and Vibrations practice problems

These come from our FE Mechanical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A particle starts from rest and accelerates uniformly, covering 180 m in 12 s. What is its velocity at the end of that interval, in m/s? Enter a number only.

Show the solution

Two unknowns here, acceleration and final velocity, and two kinematic facts: distance covered and time taken, starting from rest. For constant acceleration from rest, distance and time are related by: s = (1/2) a t^2 180 = (1/2) a (12)^2 = 72 a a = 180 / 72 = 2.5 m/s^2 Then the final velocity: v = v_0 + a t = 0 + 2.5(12) = 30 m/s A faster route skips finding a explicitly: for uniform acceleration from rest, the average velocity is half the final velocity, and average velocity is also distance over time. So v_avg = 180/12 = 15 m/s, and since v_avg = v/2 for this case, v = 30 m/s. Same answer, one less step -- worth having both routes in hand, because the exam sometimes gives you a problem shaped for the shortcut and sometimes one where only the long way works cleanly.

Problem 2

A projectile is launched from the edge of a vertical cliff of height $h = 25.0\text{ m}$ above horizontal ground with an initial velocity $v_0 = 30.0\text{ m/s}$ at an angle $\theta = 30.0^\circ$ above the horizontal. Neglecting aerodynamic drag and taking acceleration due to gravity as $g = 9.81\text{ m/s}^2$, calculate the total horizontal range $R$ (in meters) from the base of the cliff to the point of impact on the ground. (Enter numerical value in meters).

Show the solution

Step 1: Resolve the initial velocity into horizontal and vertical components: $$v_{0x} = v_0 \cos\theta = 30.0\text{ m/s} \times \cos(30.0^\circ) = 30.0 \times 0.866025 = 25.9808\text{ m/s}$$ $$v_{0y} = v_0 \sin\theta = 30.0\text{ m/s} \times \sin(30.0^\circ) = 30.0 \times 0.5000 = 15.00\text{ m/s}$$ Step 2: Determine total flight time ($t$) from vertical kinematics ($y = -25.0\text{ m}$): $$y(t) = v_{0y} t - \frac{1}{2} g t^2 \implies -25.0 = 15.00 t - 4.905 t^2$$ $$4.905 t^2 - 15.00 t - 25.0 = 0$$ Using the quadratic formula: $$t = \frac{15.00 + \sqrt{(-15.00)^2 - 4(4.905)(-25.0)}}{2 \times 4.905} = \frac{15.00 + \sqrt{225.0 + 490.5}}{9.81}$$ $$t = \frac{15.00 + \sqrt{715.5}}{9.81} = \frac{15.00 + 26.7488}{9.81} = \frac{41.7488}{9.81} = 4.2557\text{ seconds}$$ Step 3: Compute the horizontal range ($R$): $$R = v_{0x} \times t = (25.9808\text{ m/s}) \times (4.2557\text{ s}) = 110.57\text{ m} = 110.6\text{ m}$$ Distractor Analysis: - Omitting the launch cliff height ($h = 0$) gives $t = 3.06\text{ s}$ and range $79.4\text{ m}$. - Inverting sine and cosine yields $95.2\text{ m}$.

Problem 3

A uniform solid cylinder of mass $m = 12.0\text{ kg}$ and radius $R = 0.200\text{ m}$ ($I_G = \frac{1}{2} m R^2$) is released from rest at the top of a rough inclined plane of inclination angle $\theta = 30.0^\circ$ and vertical height $h = 4.00\text{ m}$. The cylinder rolls down the incline without slipping. Acceleration due to gravity is $g = 9.81\text{ m/s}^2$. In accordance with conservation of mechanical energy and planar rigid body kinetics from the NCEES FE Reference Handbook ($a_G = \frac{g \sin\theta}{1 + I_G / (m R^2)}$, $v_G = \sqrt{\frac{2 g h}{1 + I_G / (m R^2)}}$), the translational linear acceleration of the cylinder center ($a_G$, in $\text{m/s}^2$) and its speed ($v_G$, in m/s) at the base of the incline are:

  1. A2.45 m/s², v_G = 6.26 m/s
  2. B3.27 m/s², v_G = 7.23 m/scorrect
  3. C4.91 m/s², v_G = 8.86 m/s
  4. D6.54 m/s², v_G = 10.2 m/s
Show the solution

Step 1: Determine the inertia ratio for a solid cylinder: $$\frac{I_G}{m R^2} = \frac{\frac{1}{2} m R^2}{m R^2} = 0.500$$ $$1 + \frac{I_G}{m R^2} = 1.000 + 0.500 = 1.500$$ Step 2: Calculate the linear acceleration of the mass center ($a_G$): $$a_G = \frac{g \sin\theta}{1 + \frac{I_G}{m R^2}} = \frac{(9.81\text{ m/s}^2) \sin(30.0^\circ)}{1.500} = \frac{(9.81)(0.500)}{1.500} = \frac{4.905}{1.500} = 3.270\text{ m/s}^2 = 3.27\text{ m/s}^2$$ Step 3: Calculate the linear velocity at the bottom of the incline ($v_G$) via energy conservation: $$m g h = \frac{1}{2} m v_G^2 + \frac{1}{2} I_G \omega^2 = \frac{1}{2} m v_G^2 \left[ 1 + \frac{I_G}{m R^2} \right] = \frac{3}{4} m v_G^2$$ $$v_G = \sqrt{\frac{4}{3} g h} = \sqrt{\frac{4}{3} (9.81\text{ m/s}^2)(4.00\text{ m})} = \sqrt{52.320} = 7.2332\text{ m/s} = 7.23\text{ m/s}$$ Distractor Analysis: - Option A: Uses hollow thin-walled cylinder inertia ($I = m R^2$, giving $a_G = 2.45\text{ m/s}^2$). - Option B: Correct. - Option C: Assumes frictionless sliding without rotation ($a = g \sin\theta = 4.91\text{ m/s}^2$, $v = \sqrt{2gh} = 8.86\text{ m/s}$). - Option D: Uses sphere inertia factor incorrectly.

Find out where you actually stand

A free 20-question diagnostic across every FE Mechanical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Dynamics, Kinematics, and Vibrations is where your time should go at all.

Start the free Mechanical diagnostic

Retaking the FE Mechanical exam?

Copy the scores from your NCEES diagnostic report and see whether Dynamics, Kinematics, and Vibrations is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Mechanical knowledge areas