ExamPass EngineeringExamPass Engineering Start free
FE Mechanical · Knowledge area 2 of 14

Fluid Mechanics on the FE Mechanical exam

Fluid Mechanics accounts for 11 of the 110 questions — 10.0% of your exam. It is one of the three heaviest areas on this paper, so it is worth your study time before almost anything else.

Questions11
Share of exam10.0%
Rank by weight2/14
In our bank38

What Fluid Mechanics covers

On the FE Mechanical exam this area covers fluid properties, hydrostatic pressure and forces on surfaces, buoyancy, the continuity and energy equations, the momentum equation, pipe friction and minor losses, and flow measurement.

What the questions look like: A pressure or force on a submerged surface, a head loss from the Darcy-Weisbach equation and a Moody-chart friction factor, or a velocity from Bernoulli.

Worth knowing cold: Check the Reynolds number before choosing a friction relationship. Laminar and turbulent answers differ by far more than rounding.

3 free Fluid Mechanics practice problems

These come from our FE Mechanical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A rectangular channel 2.0 m wide carries water at a depth of 1.5 m with an average velocity of 0.80 m/s. What is the volumetric flow rate, in m^3/s? Enter a number only.

Show the solution

The continuity relation for an incompressible fluid in a channel or pipe is Q = A V, flow rate equals cross-sectional area times average velocity. Cross-sectional area of the flow (not the whole channel, just the wetted part up to the water depth): A = width x depth = 2.0 x 1.5 = 3.0 m^2 Flow rate: Q = A V = 3.0 x 0.80 = 2.4 m^3/s The unit check confirms the setup: m^2 x m/s = m^3/s, a volume per unit time, which is exactly what a flow rate should be. A common slip here is using the full channel height instead of the actual water depth when the two differ -- the channel is described as carrying water AT a depth of 1.5 m, so that is the figure that defines the wetted cross-section, regardless of how tall the channel walls happen to be.

Problem 2

A supercritical water flow in a rectangular open channel of constant width enters a hydraulic jump with an upstream depth $y_1 = 0.500\text{ m}$ and an upstream Froude number $Fr_1 = 3.00$. In accordance with the Bélanger hydraulic jump equation from the NCEES FE Reference Handbook ($y_2/y_1 = \frac{1}{2} [ \sqrt{1 + 8 Fr_1^2} - 1 ]$), calculate the downstream subcritical depth $y_2$ in meters. (Enter numerical value in meters).

Show the solution

Step 1: Evaluate the radical term in the Bélanger hydraulic jump equation: $$1 + 8 Fr_1^2 = 1 + 8(3.00)^2 = 1 + 8(9.00) = 1 + 72.00 = 73.00$$ $$\sqrt{73.00} = 8.54400$$ Step 2: Calculate the depth ratio ($y_2/y_1$): $$\frac{y_2}{y_1} = \frac{1}{2} \left( \sqrt{1 + 8 Fr_1^2} - 1 \right) = \frac{1}{2} (8.54400 - 1) = \frac{7.54400}{2} = 3.77200$$ Step 3: Compute the downstream conjugate depth ($y_2$): $$y_2 = y_1 \times 3.77200 = (0.500\text{ m}) \times (3.77200) = 1.8860\text{ m} = 1.89\text{ m}$$ Distractor Analysis: - Adding 1 inside brackets instead of subtracting yields $2.39\text{ m}$. - Omitting the factor of $1/2$ yields $3.77\text{ m}$.

Problem 3

Water flows in a horizontal rectangular open channel of uniform width $b = 3.00\text{ m}$. Upstream of a hydraulic jump, the water depth is $y_1 = 0.400\text{ m}$ and flow velocity is $v_1 = 8.00\text{ m/s}$ (acceleration due to gravity $g = 9.81\text{ m/s}^2$, upstream Froude number $Fr_1 = \frac{v_1}{\sqrt{g y_1}} = 4.039$). In accordance with the Bélanger hydraulic jump equation from the NCEES FE Reference Handbook ($y_2 = \frac{y_1}{2} \left[ \sqrt{1 + 8 Fr_1^2} - 1 \right]$), calculate the downstream subcritical depth ($y_2$, in meters). (Enter numerical value in meters).

Show the solution

Step 1: Calculate the upstream Froude number ($Fr_1$): $$Fr_1 = \frac{v_1}{\sqrt{g y_1}} = \frac{8.00\text{ m/s}}{\sqrt{(9.81\text{ m/s}^2)(0.400\text{ m})}} = \frac{8.00}{\sqrt{3.924}} = \frac{8.00}{1.980909} = 4.03855$$ $$Fr_1^2 = (4.03855)^2 = 16.310$$ Step 2: Evaluate the Bélanger radical expression: $$\sqrt{1 + 8 Fr_1^2} = \sqrt{1 + 8(16.310)} = \sqrt{1 + 130.48} = \sqrt{131.48} = 11.46647$$ $$\sqrt{1 + 8 Fr_1^2} - 1 = 11.46647 - 1.000 = 10.46647$$ Step 3: Solve for the downstream conjugate depth ($y_2$): $$y_2 = \frac{y_1}{2} (10.46647) = \left( \frac{0.400\text{ m}}{2} \right) (10.46647) = (0.200)(10.46647) = 2.0933\text{ m} = 2.09\text{ m}$$ Distractor Analysis: - Omitting the minus 1 inside the brackets yields $2.29\text{ m}$. - Using critical depth $y_c = (q^2/g)^{1/3} = 1.01\text{ m}$.

Find out where you actually stand

A free 20-question diagnostic across every FE Mechanical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Fluid Mechanics is where your time should go at all.

Start the free Mechanical diagnostic

Retaking the FE Mechanical exam?

Copy the scores from your NCEES diagnostic report and see whether Fluid Mechanics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Mechanical knowledge areas

Fluid Mechanics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.