ExamPass EngineeringExamPass Engineering Start free
FE Industrial and Systems · Knowledge area 10 of 13

Work Design on the FE Industrial and Systems exam

Work Design accounts for 8 of the 110 questions — 7.3% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions8
Share of exam7.3%
Rank by weight10/13
In our bank31

What Work Design covers

On the FE Industrial and Systems exam this area covers methods analysis, time study and standard times, allowances, work sampling, predetermined time systems, learning curves, and incentive systems.

What the questions look like: A standard time from observed times with a rating and allowance, or a learning-curve projection.

Worth knowing cold: Standard time problems have a fixed sequence: observed, normal, then standard. Follow it in order and they are reliable.

3 free Work Design practice problems

These come from our FE Industrial and Systems bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A time study records an observed time of 1.80 minutes per cycle for a task, with the analyst rating the worker's pace at 110% of normal (performance rating = 1.10). An allowance of 13% is applied for personal time, fatigue, and unavoidable delay. Using $NT = OT \times \text{rating}$ and $ST = NT \times (1+\text{allowance})$, what is the standard time for this task?

  1. A2.237 minutescorrect
  2. B1.980 minutes, which is the normal time before the allowance is applied, not the standard time
  3. C2.034 minutes, applying the allowance to the observed time instead of to the normal time
  4. D1.636 minutes, dividing by the performance rating instead of multiplying by it
Show the solution

A time study moves through two distinct corrections in a specific order: first the observed time is adjusted to normal time, removing the effect of this particular worker's pace being faster or slower than a defined normal pace, and only then is an allowance added on top of that normal time to account for the legitimate rest and delay every worker needs regardless of pace. Normal time: $NT = 1.80 \times 1.10 = 1.98$ minutes — this represents how long the task would take a worker performing at exactly normal pace, independent of who was actually timed. Standard time: $ST = 1.98 \times (1+0.13) = 1.98 \times 1.13 = 2.237$ minutes. This standard time is what production planning, labor standards, and incentive pay systems are built on — using the normal time alone (skipping the allowance) would set an unrealistic production target that doesn't account for the unavoidable personal and fatigue time every worker legitimately needs across a shift, leading to standards that look achievable on paper but aren't sustainable in practice.

Problem 2

An industrial engineer redesigns a high-volume manual assembly workstation to optimize operator ergonomics and productivity according to the classical Principles of Motion Economy (Barnes & Niebel) and anthropometric design principles. Select the THREE design principles that conform to verified motion economy and workstation design standards.

  1. ABoth hands should begin and complete their motions at the same time and should not be idle at the same instant except during rest periods
  2. BArm and hand motions should be made in opposite and symmetrical directions simultaneously to preserve physical torso balance
  3. CGravity feed bins and drop delivery chutes should be utilized to relieve hands from holding and long transport movements
  4. DWorkstation tabletop height should always remain fixed at 120 cm irrespective of whether tasks are seated or standing
Show the solution

**Step 1: Review Principles of Motion Economy (Barnes & Niebel)** Classical motion economy is categorized into: 1. **Use of the Human Body:** - Both hands should begin and complete their motions simultaneously (Statement A is TRUE). - Both hands should not be idle at the same time, except during rest periods (Statement A is TRUE). - Motions of the arms should be made in opposite and symmetrical directions simultaneously to balance physiological forces on the spine (Statement B is TRUE). 2. **Arrangement of the Work Place:** - Gravity feed bins and drop delivery mechanisms should be employed to deliver parts close to the point of use and allow finished parts to drop without hand transport (Statement C is TRUE). - Tools, materials, and controls should be located within the normal maximum working area (radial sweep of forearm). 3. **Design of Tools and Equipment:** - Fixtures, vises, or clamps should relieve hands from the non-productive holding Therblig. **Step 2: Evaluate Erroneous Statements** - Statement D is FALSE: Ergonomic standards mandate adjustable table heights tailored to user elbow height (for seated work, bench height is approximately at elbow level; for heavy work, slightly below elbow level). Conclusion: Correct options are **A, B, and C**.

Problem 3

Industrial work design and methods engineering utilize Therblig elemental motion classifications, performance rating concepts, and allowances to establish standard task times. Match each work measurement concept to its corresponding engineering definition.

Show the solution

**Step 1: Understand Motion Study and Work Measurement Concepts** From the FE Reference Handbook (Work Design / Motion and Time Study): 1. **Therbligs (Frank and Lillian Gilbreth):** 17 elemental micro-motions divided into effective (value-adding, e.g. Grasp, Reach, Move) and ineffective (non-value-adding waste, e.g. Search, Select, Hold). - **Search (Sh):** Ineffective mental/sensory motion where eyes or hands hunt for an object; eliminated in 5S workplace organization. - **Grasp (G):** Effective elemental physical motion securing an object with the hand or fingers. 2. **Normal Pace (100% Performance Rating):** Standard rate of energy output by an average well-trained operator, conventionally defined by benchmarks such as: - Walking unburdened on smooth level ground at $3.0\text{ mph}$ ($4.83\text{ km/h}$). - Dealing a standard 52-card deck into four equal piles in 0.50 minutes (30 seconds). 3. **PFD Allowance Factor:** Personal, Fatigue, and Delay percentage adjustment applied to normal time ($T_n$) to determine equitable standard time ($T_{std} = T_n \times (1 + A_{PFD})$). **Step 2: Identify Distractors** - *Predetermined Motion Standard:* A synthesis of elemental movement data (such as MTM or MOST). - *Ergonomic Stress Index:* A biomechanical hazard rating, not a time-study adjustment. Conclusion: - Visual seeking $\implies$ **Search (Sh)** - Closing fingers around object $\implies$ **Grasp (G)** - Walking at 3.0 mph benchmark $\implies$ **Normal Pace (100% Performance)** - PFD percentage multiplier $\implies$ **Allowance Factor**

Find out where you actually stand

A free 20-question diagnostic across every FE Industrial and Systems knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Work Design is where your time should go at all.

Start the free Industrial & Systems diagnostic

Retaking the FE Industrial and Systems exam?

Copy the scores from your NCEES diagnostic report and see whether Work Design is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Industrial and Systems knowledge areas