ExamPass EngineeringExamPass Engineering Start free
FE Other Disciplines · Knowledge area 11 of 14

Materials on the FE Other Disciplines exam

Materials accounts for 6 of the 110 questions — 5.5% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions6
Share of exam5.5%
Rank by weight11/14
In our bank20

What Materials covers

On the FE Other Disciplines exam this area covers mechanical properties and testing, the stress-strain curve, steel and concrete behaviour, aggregates and asphalt, thermal and moisture effects, and material durability.

What the questions look like: A modulus, yield or ultimate strength read from a curve, or a property comparison between materials.

Worth knowing cold: Know the shape of the stress-strain curve for steel and concrete cold. Several questions across the exam assume it without saying so.

3 free Materials practice problems

These come from our FE Other Disciplines bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

Aluminum exhibits a Face-Centered Cubic (FCC) crystal lattice structure with a unit cell lattice parameter of $a = 0.4050\text{ nm} = 4.050 \times 10^{-10}\text{ m}$. What is the planar atomic density $PD_{(111)}$ on the close-packed $(111)$ crystallographic plane in atoms per square nanometer ($\text{atoms/nm}^2$)? Enter your answer rounded to one decimal place (e.g., 14.1).

Show the solution

**Step 1: Determine Atoms in the (111) Plane Triangle** From the FE Reference Handbook (Materials Science / Crystallography / Planar Density): In an FCC unit cell, the $(111)$ plane intersects the cube diagonals forming an equilateral triangle whose sides equal the face diagonal: $$s = a\sqrt{2} = (0.4050\text{ nm})\sqrt{2} = 0.572756\text{ nm}$$ The planar triangle encloses: - 3 corner atoms, each shared among 6 adjacent triangles: $3 \times (1/6) = 0.5\text{ atoms}$ - 3 edge-centered face atoms, each shared between 2 triangles: $3 \times (1/2) = 1.5\text{ atoms}$ Total effective atoms centered on the plane: $$N_{atoms} = 0.5 + 1.5 = 2.0\text{ atoms}$$ **Step 2: Calculate Area of (111) Triangular Plane** $$A_{(111)} = \frac{\sqrt{3}}{4} s^2 = \frac{\sqrt{3}}{4} (a\sqrt{2})^2 = \frac{\sqrt{3}}{2} a^2$$ $$A_{(111)} = \frac{\sqrt{3}}{2} (0.4050\text{ nm})^2 = 0.866025 \times 0.164025 = 0.142049\text{ nm}^2$$ **Step 3: Compute Planar Density $PD_{(111)}$** $$PD_{(111)} = \frac{N_{atoms}}{A_{(111)}} = \frac{2.0\text{ atoms}}{0.142049\text{ nm}^2} = 14.0797\text{ atoms/nm}^2 \approx 14.1\text{ atoms/nm}^2$$ Conclusion: The planar atomic density is **$14.1\text{ atoms/nm}^2$**.

Problem 2

Which **TWO** of the following statements regarding the heat treatment, microstructural phase transformations, and mechanical property evolution of plain carbon steels are **TRUE**?

  1. ARapid water or brine quenching of austenite to room temperature produces a hard, brittle, body-centered tetragonal (BCT) non-equilibrium phase called martensite via a diffusionless shear transformation.
  2. BFull annealing consists of rapid quenching from the austenite region followed by sub-critical cryogenic cooling to eliminate all residual ductility.
  3. CTempering a quenched steel involves reheating it below the lower eutectoid temperature (A1) to precipitate fine iron carbides (Fe3C), significantly enhancing toughness and impact resistance at the expense of peak hardness.
  4. DPearlite consists of a single homogeneous solid-solution crystalline phase devoid of any lamellar boundary interfaces.
Show the solution

Evaluation of heat treatment and phase transformation principles: 1. Statement A (TRUE): Martensitic transformation is an athermal, diffusionless, military-style shear displacement of iron atoms. When austenite (FCC) is cooled below the martensite start ($M_s$) temperature at rates exceeding the critical cooling rate, carbon atoms cannot diffuse out to form cementite. Instead, they remain interstitial, distorting the iron unit cell into body-centered tetragonal (BCT) martensite, which is characterized by extremely high hardness and brittleness. 2. Statement B (FALSE): Full annealing involves heating hypoeutectoid steel into the austenite phase field, followed by very slow, controlled furnace cooling. The goal of annealing is to produce coarse pearlite and proeutectoid ferrite, resulting in minimum hardness, maximum ductility, and complete relief of internal residual stresses. 3. Statement C (TRUE): Tempering is a sub-critical thermal process applied to as-quenched martensite. Reheating between $200^\circ\text{C}$ and $650^\circ\text{C}$ provides sufficient thermal energy for trapped carbon to precipitate as extremely fine, dispersed cementite ($\text{Fe}_3\text{C}$) particles embedded within a ductile ferrite matrix. This transforms brittle martensite into tempered martensite, restoring toughness and impact resistance. 4. Statement D (FALSE): Pearlite is not a single phase; it is a two-phase lamellar microconstituent formed by the eutectoid decomposition of austenite at $727^\circ\text{C}$ ($0.77\text{ wt\% C}$): $$\gamma (0.77\text{ wt\% C}) \longrightarrow \alpha (0.022\text{ wt\% C}) + \text{Fe}_3\text{C} (6.70\text{ wt\% C})$$ It consists of alternating thin plates (lamellae) of soft, ductile ferrite ($\alpha$) and hard, brittle cementite ($\text{Fe}_3\text{C}$). Therefore, the two correct statements are A and C.

Problem 3

In physical metallurgy and mechanical behavior of crystalline materials, crystal lattice structures dictate deformation mechanisms and brittle-ductile transition behavior. Which of the following statements correctly describe metallic crystal structures and their deformation characteristics? Select the TWO correct statements:

  1. AFace-Centered Cubic (FCC) metals (such as copper, aluminum, and austenitic stainless steel) maintain high ductility even at cryogenic temperatures because they possess 12 close-packed slip systems ({111} ) and do not exhibit a distinct ductile-to-brittle transition temperature (DBTT).
  2. BBody-Centered Cubic (BCC) metals (such as ferritic iron, tungsten, and chromium) exhibit a pronounced ductile-to-brittle transition temperature (DBTT) because dislocation Peierls barrier resistance increases significantly as temperature decreases.
  3. CHexagonal Close-Packed (HCP) metals exhibit the highest room-temperature ductility of all metallic systems because they contain 48 independent intersecting slip systems.
  4. DFace-Centered Cubic (FCC) crystals have an atomic packing factor (APF) of 0.68, which is lower than that of Body-Centered Cubic (BCC) crystals.
Show the solution

Step 1 - Crystal Slip Systems and Ductility: 1. Face-Centered Cubic (FCC): - Contains 4 {111} close-packed planes with 3 directions each = 12 independent close-packed slip systems. - Dislocations move readily even at liquid nitrogen temperatures; FCC metals do NOT exhibit a ductile-to-brittle transition temperature (DBTT). -> Option A is TRUE. 2. Body-Centered Cubic (BCC): - Lacks truly close-packed planes; slip occurs on {110}, {112}, and {123} planes. - Peierls stress (lattice friction resisting dislocation motion) is strongly thermally activated. - At sub-ambient temperatures, dislocation glide freezes, triggering cleavage fracture (pronounced DBTT). -> Option B is TRUE. Step 2 - Analyze Distractors C and D: - Option C: HCP metals (e.g., zinc, magnesium, titanium) have restricted slip systems (only 3 in the basal plane at room temperature) and typically exhibit low ductility and high anisotropy. - Option D: FCC has an atomic packing factor (APF) of 0.74 (close-packed), while BCC has an APF of 0.68 (non-close-packed). Correct selection: ["A","B"].

Find out where you actually stand

A free 20-question diagnostic across every FE Other Disciplines knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Materials is where your time should go at all.

Start the free Other Disciplines diagnostic

Retaking the FE Other Disciplines exam?

Copy the scores from your NCEES diagnostic report and see whether Materials is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Other Disciplines knowledge areas

Materials on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.