Problem 1
A plain concrete beam has f'c = 4,000 psi, a rectangular cross-section 12 in wide by 20 in deep, with the neutral axis at mid-height. Using the ACI modulus of rupture fr = 7.5*sqrt(f'c), what moment will first crack this section?
- A15.8 kip-ft
- B21.1 kip-ft
- C31.6 kip-ftcorrect
- D47.4 kip-ft
Show the solution
The cracking moment is governed by the tensile capacity of the plain concrete, not by reinforcement (there is none here), so the first step is finding that tensile capacity via the modulus of rupture: fr = 7.5*sqrt(f'c) = 7.5*sqrt(4000) = 474.3 psi. Next, the uncracked section properties: for a rectangular section, Ig = bh^3/12 = 12(20)^3/12 = 8,000 in^4, and the distance from the neutral axis (at mid-height, since the section is uncracked and plain) to the extreme tension fiber is yt = h/2 = 10 in. Finally, the cracking moment comes from the flexure formula fr = Mcr*yt/Ig, rearranged: Mcr = fr*Ig/yt = 474.3(8000)/10 = 379,473 lb-in, which converts to 31,623 lb-ft, or approximately 31.6 kip-ft.
Problem 2
An asphalt concrete mix has a bulk specific gravity of the compacted mix Gmb = 2.35, a bulk specific gravity of the aggregate Gsb = 2.70, and the aggregate makes up 95% of the mix by mass (Ps = 0.95). Using the voids in mineral aggregate formula, VMA(%) = 100 - (Gmb*Ps*100)/Gsb, what is the VMA for this mix, in percent? Round to 2 decimal places.
Show the solution
Voids in mineral aggregate (VMA) represents the space between aggregate particles in the compacted mix that is available for either asphalt binder or air voids — too little VMA leaves inadequate room for enough binder to properly coat and bind the aggregate, while too much VMA can indicate an overly porous, potentially unstable mix, which is why VMA has both minimum design requirements and is carefully checked in mix design. Substituting Gmb=2.35, Ps=0.95, Gsb=2.70: VMA = 100 - (2.35*0.95*100)/2.70 = 100 - (223.25)/2.70 = 100 - 82.69 = 17.31%. This VMA value would be compared against typical specification minimums (which vary by nominal maximum aggregate size, with smaller aggregate gradations generally requiring higher minimum VMA) to confirm the mix design provides adequate void space for durable, well-bound pavement performance.
Problem 3
A normal-weight concrete mixture is being proportioned for a unit volume of $1.000\text{ m}^3$ using the absolute volume method (ACI 211.1). The specified batch quantities and material properties are: - Water: $180\text{ kg}$ (density $\rho_w = 1{,}000\text{ kg/m}^3$) - Portland cement: $360\text{ kg}$ (specific gravity $SG_c = 3.15$) - Coarse aggregate (SSD): $1{,}100\text{ kg}$ (specific gravity $SG_{ca} = 2.68$) - Air content: $2.5\%$ - Fine aggregate (sand, SSD): specific gravity $SG_{fa} = 2.62$ Using the absolute volume method, the required batch mass of saturated surface-dry (SSD) fine aggregate is most nearly:
- A625 kg
- B708 kgcorrect
- C792 kg
- D840 kg
Show the solution
Step 1: Reference the NCEES FE Reference Handbook (Civil Materials, Concrete Mix Proportioning - Absolute Volume Method). The total volume of concrete equals the sum of the absolute volumes of all constituent components: $$V_{\text{concrete}} = V_{\text{water}} + V_{\text{cement}} + V_{\text{coarse agg}} + V_{\text{air}} + V_{\text{fine agg}} = 1.000\text{ m}^3$$ Step 2: Calculate the absolute volumes of the known components: - Water ($180\text{ kg}$): $$V_w = \dfrac{180\text{ kg}}{1{,}000\text{ kg/m}^3} = 0.1800\text{ m}^3$$ - Portland cement ($360\text{ kg}$, $SG = 3.15$): $$V_c = \dfrac{360\text{ kg}}{3.15 \times 1{,}000\text{ kg/m}^3} = 0.1143\text{ m}^3$$ - Coarse aggregate ($1{,}100\text{ kg}$, $SG = 2.68$): $$V_{ca} = \dfrac{1{,}100\text{ kg}}{2.68 \times 1{,}000\text{ kg/m}^3} = 0.4104\text{ m}^3$$ - Entrained / entrapped air ($2.5\%$ of $1.000\text{ m}^3$): $$V_{\text{air}} = 0.0250\text{ m}^3$$ Step 3: Sum known absolute volumes: $$V_{\text{known}} = 0.1800 + 0.1143 + 0.4104 + 0.0250 = 0.7297\text{ m}^3$$ Step 4: Determine the required absolute volume of fine aggregate ($V_{fa}$): $$V_{fa} = 1.0000\text{ m}^3 - 0.7297\text{ m}^3 = 0.2703\text{ m}^3$$ Step 5: Calculate the required batch mass of fine aggregate in SSD condition ($SG_{fa} = 2.62$): $$M_{fa} = V_{fa} \times (SG_{fa} \times \rho_w) = 0.2703\text{ m}^3 \times (2.62 \times 1{,}000\text{ kg/m}^3)$$ $$M_{fa} = 0.2703 \times 2{,}620\text{ kg/m}^3 = 708.19\text{ kg} \approx 708\text{ kg}$$ Distractor Analysis: - Option A (625 kg) results from neglecting the 2.5% air content ($V_{fa} = 0.2953\text{ m}^3$) and miscalculating specific gravity. - Option B (708 kg) is the exact SSD mass required by the absolute volume balance. - Option C (792 kg) uses cement specific gravity of 2.60 or omits water volume properly. - Option D (840 kg) assumes a standard arbitrary proportion without subtracting air and coarse aggregate volumes.