ExamPass EngineeringExamPass Engineering Start free
FE Industrial and Systems · Knowledge area 12 of 13

Engineering Sciences on the FE Industrial and Systems exam

Engineering Sciences accounts for 4 of the 110 questions — 3.6% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions4
Share of exam3.6%
Rank by weight12/13
In our bank19

What Engineering Sciences covers

On the FE Industrial and Systems exam this area covers statics and dynamics fundamentals, work and energy, electricity and magnetism basics, and the material and thermal fundamentals that support the discipline topics.

What the questions look like: Short computations drawn from mechanics, electricity or materials at a fundamental level.

Worth knowing cold: This area rewards breadth over depth. Being comfortable across several fundamentals beats mastering one.

3 free Engineering Sciences practice problems

These come from our FE Industrial and Systems bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

An industrial manufacturing facility utilizes a counterflow shell-and-tube heat exchanger to recover waste heat from high-temperature hydraulic quenching oil before recirculation. Quenching oil (specific heat cp,h = 2.10 kJ/kg·K) flows at a mass rate of m_dot_h = 4.0 kg/s, entering the exchanger at Th,in = 130 °C and exiting at Th,out = 60 °C. Process cooling water (cp,c = 4.184 kJ/kg·K) enters the counterflow tube bundle at Tc,in = 20 °C with a mass flow rate of m_dot_c = 5.0 kg/s. The overall clean heat transfer coefficient is U = 450 W/m²·K. Calculate the total heat transfer duty (q_dot in kW), the log mean temperature difference (LMTD, in °C), and the required heat transfer surface area (A, in m²).

  1. ARequired surface area is 19.2 m² (Heat duty = 420 kW, LMTD = 48.5 °C)
  2. BRequired surface area is 25.6 m² (Heat duty = 750 kW, LMTD = 65.2 °C)
  3. CRequired surface area is 25.1 m² (Heat duty = 588 kW, LMTD = 52.1 °C)
  4. DRequired surface area is 22.4 m² (Heat duty = 588 kW, LMTD = 58.5 °C)correct
Show the solution

**Step 1: Calculate the Total Thermal Heat Duty ($\dot{q}$)** From the energy balance on the hot fluid (oil): $$\dot{q} = \dot{m}_h c_{p,h} (T_{h,in} - T_{h,out})$$ $$\dot{q} = 4.0\text{ kg/s} \times 2.10\text{ kJ/kg}\cdot\text{K} \times (130 - 60)^\circ\text{C}$$ $$\dot{q} = 8.40 \times 70 = 588.0\text{ kW} = 588{,}000\text{ W}$$ **Step 2: Determine Cold Water Exit Temperature ($T_{c,out}$)** From the energy balance on the cold fluid: $$\dot{q} = \dot{m}_c c_{p,c} (T_{c,out} - T_{c,in})$$ $$588.0 = 5.0 \times 4.184 \times (T_{c,out} - 20)$$ $$588.0 = 20.92 \times (T_{c,out} - 20) \implies T_{c,out} - 20 = \frac{588.0}{20.92} = 28.107^\circ\text{C}$$ $$T_{c,out} = 20 + 28.107 = 48.11^\circ\text{C}$$ **Step 3: Calculate the Log Mean Temperature Difference ($LMTD$)** For a counterflow heat exchanger: $$\Delta T_1 = T_{h,in} - T_{c,out} = 130 - 48.11 = 81.89^\circ\text{C}$$ $$\Delta T_2 = T_{h,out} - T_{c,in} = 60 - 20 = 40.00^\circ\text{C}$$ $$\Delta T_{lm} = \frac{\Delta T_1 - \Delta T_2}{\ln\left(\frac{\Delta T_1}{\Delta T_2}\right)} = \frac{81.89 - 40.00}{\ln\left(\frac{81.89}{40.00}\right)} = \frac{41.89}{\ln(2.04725)} = \frac{41.89}{0.71650} = 58.463^\circ\text{C} \approx 58.5^\circ\text{C}$$ **Step 4: Calculate Required Heat Exchanger Surface Area ($A$)** $$\dot{q} = U \cdot A \cdot \Delta T_{lm}$$ $$A = \frac{\dot{q}}{U \cdot \Delta T_{lm}} = \frac{588{,}000\text{ W}}{450\text{ W/m}^2\cdot\text{K} \times 58.463\text{ K}} = \frac{588{,}000}{26{,}308.35} = 22.35\text{ m}^2 \approx 22.4\text{ m}^2$$ Conclusion: Heat duty is **588 kW**, LMTD is **58.5 °C**, and required surface area is **22.4 m²**.

Problem 2

A heavy mechanical stamping press exerts a vertical punch force F(x) during a sheet metal forming stroke that varies with displacement x (in meters) according to: $F(x) = 1200 + 4500 x^{0.5} - 600 x\text{ kN}$ over the full punch draw depth from $x = 0$ to $x = 0.09\text{ m}$. Calculate the total mechanical work W performed by the press punch during one complete drawing stroke.

  1. A186.6 kJ (Total punch mechanical energy over 0.09 m stroke)correct
  2. B215.4 kJ (Calculated using peak punch force)
  3. C142.8 kJ (Neglecting square-root work hardening term)
  4. D168.2 kJ (Linear trapezoidal displacement approximation)
Show the solution

**Step 1: Formulate the Work Integral** From the FE Reference Handbook (Dynamics & Mechanics of Materials / Work and Energy): Mechanical work done by a variable force along displacement $x$ is: $$W = \int_{x_1}^{x_2} F(x) \, dx$$ Substituting the force equation with limits from $x = 0$ to $x = 0.09\text{ m}$: $$W = \int_{0}^{0.09} \left( 1200 + 4500 x^{0.5} - 600 x \right) dx$$ **Step 2: Integrate Term by Term** 1. Constant base force term: $$\int_{0}^{0.09} 1200 \, dx = \left[ 1200 x \right]_0^{0.09} = 1200 \times 0.09 = 108.0\text{ kJ}$$ 2. Strain-hardening force term ($x^{1/2}$): $$\int_{0}^{0.09} 4500 x^{0.5} \, dx = \left[ 4500 \times \frac{2}{3} x^{1.5} \right]_0^{0.09} = 3000 \times (0.09)^{1.5}$$ Since $(0.09)^{1.5} = (\sqrt{0.09})^3 = (0.3)^3 = 0.027$: $$3000 \times 0.027 = 81.0\text{ kJ}$$ 3. Friction/elastic recovery linear reduction term ($x$): $$\int_{0}^{0.09} -600 x \, dx = \left[ -300 x^2 \right]_0^{0.09} = -300 \times (0.09)^2 = -300 \times 0.0081 = -2.43\text{ kJ}$$ **Step 3: Sum the Integrated Components** $$W = 108.0\text{ kJ} + 81.0\text{ kJ} - 2.43\text{ kJ} = 186.57\text{ kJ} \approx 186.6\text{ kJ}$$ Conclusion: The total mechanical work performed during the stroke is **186.6 kJ**.

Problem 3

A solid circular steel transmission shaft of uniform outer diameter $d = 0.050\text{ m}$ (50 mm) and length $L = 2.40\text{ m}$ transmits mechanical power from an electric motor to an automated conveyor drive, delivering a constant torsional moment $T = 1{,}800\text{ N}\cdot\text{m}$. The shear modulus of elasticity of the shaft material is $G = 80.0\text{ GPa}$ ($80 \times 10^9\text{ Pa}$). Calculate the maximum torsional shear stress ($\tau_{max}$) on the shaft surface and the resulting total angle of twist ($\phi$) in radians.

  1. A73.3 MPa maximum shear stress with 0.088 rad (5.04°) angle of twistcorrect
  2. B36.7 MPa maximum shear stress with 0.044 rad (2.52°) angle of twist
  3. C146.6 MPa maximum shear stress with 0.176 rad (10.08°) angle of twist
  4. D92.5 MPa maximum shear stress with 0.065 rad (3.72°) angle of twist
Show the solution

**Step 1: Compute Polar Moment of Inertia (J)** From the FE Reference Handbook (Mechanics of Materials / Torsion): For a solid circular shaft of diameter $d = 0.050\text{ m}$ (radius $c = 0.025\text{ m}$): $$J = \frac{\pi d^4}{32} = \frac{\pi (0.050)^4}{32} = \frac{\pi (6.25 \times 10^{-6})}{32} = 6.13592 \times 10^{-7}\text{ m}^4$$ **Step 2: Calculate Maximum Surface Shear Stress ($\tau_{max}$)** $$\tau_{max} = \frac{T c}{J}$$ Given $T = 1{,}800\text{ N}\cdot\text{m}$ and $c = 0.025\text{ m}$: $$\tau_{max} = \frac{1{,}800 \times 0.025}{6.13592 \times 10^{-7}} = \frac{45.0}{6.13592 \times 10^{-7}} = 73{,}338{,}600\text{ Pa} \approx 73.3\text{ MPa}$$ **Step 3: Calculate Angle of Twist ($\phi$)** $$\phi = \frac{T L}{G J}$$ Given $L = 2.40\text{ m}$ and $G = 80 \times 10^9\text{ Pa}$: $$G J = (80 \times 10^9) \times (6.13592 \times 10^{-7}) = 49{,}087.36\text{ N}\cdot\text{m}^2$$ $$\phi = \frac{1{,}800 \times 2.40}{49{,}087.36} = \frac{4{,}320}{49{,}087.36} = 0.088006\text{ radians} \approx 0.0880\text{ rad}$$ Converting to degrees: $0.088006 \times \frac{180}{\pi} = 5.04^\circ$. Conclusion: The mechanical responses are **73.3 MPa maximum shear stress with 0.088 rad (5.04°) angle of twist** (Option A).

Find out where you actually stand

A free 20-question diagnostic across every FE Industrial and Systems knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Engineering Sciences is where your time should go at all.

Start the free Industrial & Systems diagnostic

Retaking the FE Industrial and Systems exam?

Copy the scores from your NCEES diagnostic report and see whether Engineering Sciences is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Industrial and Systems knowledge areas

Engineering Sciences on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.