ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 12 of 17

Engineering Sciences on the FE Chemical exam

Engineering Sciences accounts for 5 of the 110 questions — 4.5% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions5
Share of exam4.5%
Rank by weight12/17
In our bank18

What Engineering Sciences covers

On the FE Chemical exam this area covers statics and dynamics fundamentals, work and energy, electricity and magnetism basics, and the material and thermal fundamentals that support the discipline topics.

What the questions look like: Short computations drawn from mechanics, electricity or materials at a fundamental level.

Worth knowing cold: This area rewards breadth over depth. Being comfortable across several fundamentals beats mastering one.

3 free Engineering Sciences practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

An electric motor drives a high-viscosity polymer mixer, delivering a steady torque of $350\text{ N}\cdot\text{m}$ to the mixer shaft rotating at $180\text{ rpm}$. The motor is connected to a $460\text{ V}$ (line-to-line), 3-phase AC industrial power line. If the motor operates with an efficiency of $\eta = 88.0\%$ and a power factor of $PF = 0.850$, the line current drawn by the motor is most nearly:

  1. A8.2 A
  2. B9.4 A
  3. C11.1 Acorrect
  4. D14.2 A
Show the solution

Step 1: Calculate the rotational speed in radians per second: $$\omega = 180\text{ rev/min} \times \dfrac{2\pi\text{ rad}}{1\text{ rev}} \times \dfrac{1\text{ min}}{60\text{ s}} = 6\pi = 18.850\text{ rad/s}$$ Step 2: Determine the mechanical output power of the motor: $$P_{mech} = T \omega = 350\text{ N}\cdot\text{m} \times 18.850\text{ rad/s} = 6,597.3\text{ W} = 6.60\text{ kW}$$ Step 3: Determine the electrical input power using motor efficiency: $$P_{elec} = \dfrac{P_{mech}}{\eta} = \dfrac{6,597.3\text{ W}}{0.880} = 7,497.0\text{ W} = 7.50\text{ kW}$$ Step 4: Compute the line current from the 3-phase electrical power formula in the FE Handbook: $$P_{elec} = \sqrt{3} V_L I_L (PF)$$ $$I_L = \dfrac{P_{elec}}{\sqrt{3} V_L (PF)} = \dfrac{7,497.0\text{ W}}{\sqrt{3} \times 460\text{ V} \times 0.850} = \dfrac{7,497.0}{677.23} = 11.07\text{ A} \approx 11.1\text{ A}$$ Distractor Analysis: - Option A (8.2 A) forgets the $\sqrt{3}$ factor and divides by 3. - Option B (9.4 A) ignores the motor efficiency, calculating current from mechanical power alone. - Option D (14.2 A) treats the system as single-phase without the $\sqrt{3}$ term in the denominator.

Problem 2

A thin-walled cylindrical chemical process drum (inside diameter $D_i = 1.18\text{ m}$, wall thickness $t = 10.0\text{ mm} = 0.010\text{ m}$) operates under an internal design gage pressure of $P = 2.00\text{ MPa}$. According to thin-walled pressure vessel stress formulas from the NCEES FE Reference Handbook, the circumferential hoop stress ($\sigma_h$) and the longitudinal axial stress ($\sigma_l$) in the shell wall are most nearly:

  1. Aσh = 59 MPa, σl = 118 MPa
  2. Bσh = 118 MPa, σl = 59 MPacorrect
  3. Cσh = 177 MPa, σl = 88 MPa
  4. Dσh = 236 MPa, σl = 118 MPa
Show the solution

Step 1: Calculate the circumferential (hoop) stress ($\sigma_h$) from the NCEES FE Reference Handbook: $$\sigma_h = \frac{P D_i}{2 t}$$ $$\sigma_h = \frac{(2.00\text{ MPa})(1.18\text{ m})}{2(0.010\text{ m})} = \frac{2.36\text{ MPa}\cdot\text{m}}{0.020\text{ m}} = 118.0\text{ MPa}$$ Step 2: Calculate the longitudinal (axial) stress ($\sigma_l$): $$\sigma_l = \frac{P D_i}{4 t} = \frac{\sigma_h}{2}$$ $$\sigma_l = \frac{(2.00\text{ MPa})(1.18\text{ m})}{4(0.010\text{ m})} = \frac{2.36}{0.040} = 59.0\text{ MPa}$$ Distractor Analysis: - Option A: Inverts hoop and longitudinal stresses. - Option B: Correct. - Option C: Assumes spherical vessel geometry where $\sigma_h = \sigma_l$. - Option D: Omits the factor of 2 in denominator.

Problem 3

A three-phase electric induction motor drives a centrifugal chemical process pump circulating a glycol solution ($Q = 0.0400\text{ m}^3\text{/s}$, $\rho = 1050\text{ kg/m}^3$). The motor draws $32.0\text{ kW}$ of electrical power from the electrical grid and operates with an energy conversion efficiency of $\eta_m = 92.0\%$. The centrifugal pump operates with a hydraulic mechanical efficiency of $\eta_p = 78.0\%$. The net hydraulic power delivered directly to the flowing fluid ($P_{fluid} = \Delta P \cdot Q$) is most nearly:

  1. A32.0 kW
  2. B29.4 kW
  3. C25.0 kW
  4. D23.0 kWcorrect
Show the solution

Step 1: Calculate mechanical brake power delivered to the pump shaft: $$P_{shaft} = P_{elec} \cdot \eta_m = (32.0\text{ kW}) \times (0.920) = 29.44\text{ kW}$$ Step 2: Calculate hydraulic power delivered directly to the fluid: $$P_{fluid} = P_{shaft} \cdot \eta_p = (29.44\text{ kW}) \times (0.780) = 22.963\text{ kW} \approx 23.0\text{ kW}$$ Step 3: Verification of combined efficiency: $$\eta_{overall} = \eta_m \cdot \eta_p = 0.920 \times 0.780 = 0.7176 = 71.76\%$$ $$P_{fluid} = (32.0\text{ kW}) \times (0.7176) = 22.96\text{ kW} = 23.0\text{ kW}$$ Distractor Analysis: - Option A: Gross electrical power input ($32.0\text{ kW}$), neglecting all electrical and hydraulic losses. - Option B: Motor shaft power ($29.4\text{ kW}$), omitting pump impeller mechanical and hydraulic losses. - Option C: Applies only pump efficiency to electrical power ($32.0 \times 0.780 = 25.0\text{ kW}$), omitting motor efficiency. - Option D: Correct.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Engineering Sciences is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Engineering Sciences is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas

Engineering Sciences on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.