ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 14 of 17

Process Control on the FE Chemical exam

Process Control accounts for 5 of the 110 questions — 4.5% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions5
Share of exam4.5%
Rank by weight14/17
In our bank18

What Process Control covers

On the FE Chemical exam this area covers dynamic process models, first and second-order responses, feedback control, P, PI and PID controllers, stability, and control valve and sensor behaviour.

What the questions look like: A time constant or steady-state gain from a response, or identifying the effect of changing a controller setting.

Worth knowing cold: Most questions are about qualitative behaviour rather than tuning arithmetic. Know what integral action fixes and what derivative action costs.

3 free Process Control practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A feedback control system for a stirred chemical reactor is represented by the block diagram shown. The loop consists of a proportional controller $G_c(s) = K_c$, a pneumatic control valve $G_v(s) = \dfrac{1.50}{0.20s + 1}$, a reactor process $G_p(s) = \dfrac{4.00}{(2.00s + 1)(0.50s + 1)}$, and a feedback transmitter $H(s) = 0.250$. Using the Routh-Hurwitz stability criterion, the maximum controller gain $K_c$ for which the closed-loop system remains stable (the ultimate gain $K_{cu}$) is most nearly:

  1. A8.52
  2. B12.83correct
  3. C15.40
  4. D18.25
Show the solution

Step 1: Write the closed-loop characteristic equation $1 + G_c G_v G_p H = 0$: $$1 + K_c \left[\dfrac{1.50}{0.20s + 1}\right] \left[\dfrac{4.00}{(2.00s + 1)(0.50s + 1)}\right] (0.250) = 0$$ $$1 + \dfrac{1.50 \times 4.00 \times 0.250 K_c}{(0.20s + 1)(2.00s + 1)(0.50s + 1)} = 0$$ $$1 + \dfrac{1.50 K_c}{(0.20s + 1)(2.00s + 1)(0.50s + 1)} = 0$$ Step 2: Expand the denominator polynomial: $$(2.00s + 1)(0.50s + 1) = 1.00s^2 + 2.50s + 1$$ $$(1.00s^2 + 2.50s + 1)(0.20s + 1) = 0.20s^3 + 1.00s^2 + 0.50s^2 + 2.50s + 0.20s + 1$$ $$= 0.20s^3 + 1.50s^2 + 2.70s + 1$$ Step 3: Set up the characteristic polynomial: $$0.20s^3 + 1.50s^2 + 2.70s + (1 + 1.50 K_c) = 0$$ Step 4: Construct the Routh array: Row $s^3$: $a_3 = 0.20$, $a_1 = 2.70$ Row $s^2$: $a_2 = 1.50$, $a_0 = 1 + 1.50 K_c$ Row $s^1$ coefficient: $$b_1 = \dfrac{a_2 a_1 - a_3 a_0}{a_2} = \dfrac{1.50(2.70) - 0.20(1 + 1.50 K_c)}{1.50} > 0$$ $$4.05 - 0.20 - 0.30 K_c > 0 \implies 3.85 - 0.30 K_c > 0$$ $$K_c 0 \implies K_c > -0.67$. Thus, the maximum stable gain is $K_{cu} = 12.83$. Distractor Analysis: - Option A (8.52) neglects the sensor attenuation factor $H = 0.250$. - Option C (15.40) drops the $0.20$ term in the numerator of the Routh element: $4.05 / 0.30 = 13.5$ or miscalculates the expansion. - Option D (18.25) adds instead of subtracting in the Routh determinant.

Problem 2

A feedback control loop on a jacketed chemical reactor has the following open-loop frequency response characteristics obtained from a Bode plot: - At the phase crossover frequency $\omega_{180} = 2.50\text{ rad/min}$ (where the open-loop phase lag is $\phi = -180^\circ$), the open-loop amplitude ratio is $|G_{OL}(j\omega)| = 0.40$. - At the gain crossover frequency $\omega_g = 1.20\text{ rad/min}$ (where the open-loop amplitude ratio is $|G_{OL}(j\omega)| = 1.00$), the open-loop phase angle is $\phi = -135^\circ$. Which of the following statements regarding the stability margins of this closed-loop control system are correct? Select the two that apply.

  1. AThe Gain Margin (GM) is 2.50 (or +7.96 dB)
  2. BThe Phase Margin (PM) is 45 degrees
  3. CThe Gain Margin (GM) is 0.40
  4. DThe closed-loop system is unstable because the phase lag exceeds 90 degrees
Show the solution

Step 1: Calculate the Gain Margin (GM) from the NCEES FE Reference Handbook: Gain Margin is defined as the reciprocal of the open-loop gain at the phase crossover frequency (where $\phi = -180^\circ$): $$GM = \frac{1}{|G_{OL}(j\omega_{180})|} = \frac{1}{0.40} = 2.50$$ In decibels: $$GM_{dB} = 20 \log_{10}(2.50) \approx 20(0.39794) = +7.96\text{ dB}$$ Option A is correct, and Option C is incorrect. Step 2: Calculate the Phase Margin (PM): Phase Margin is defined as the phase angle above $-180^\circ$ at the gain crossover frequency (where $|G_{OL}(j\omega)| = 1.0$): $$PM = 180^\circ + \phi(\omega_g) = 180^\circ + (-135^\circ) = 45^\circ$$ Option B is correct. Step 3: Evaluate stability (Option D): Because both $GM > 1$ ($2.50 > 1$) and $PM > 0$ ($45^\circ > 0$), the closed-loop system is strictly stable with good damping. Option D is false.

Problem 3

In industrial feedback control loop design and PID controller tuning, which of the following statements regarding the physical action and frequency characteristics of derivative control mode are correct? Select the two that apply.

  1. ADerivative action introduces phase lead into the open-loop frequency response, improving closed-loop stability margins and reducing peak dynamic overshoot
  2. BDerivative action provides anticipatory control by generating a corrective output proportional to the instantaneous rate of change of the error signal
  3. CDerivative action eliminates steady-state offset error resulting from sustained step load disturbances without requiring integral action
  4. DDerivative action effectively attenuates and filters high-frequency process measurement noise present in raw sensor signals
Show the solution

Step 1: Analyze phase characteristics of derivative action (Option A): From the NCEES FE Reference Handbook: The ideal derivative transfer function is $G_D(s) = 1 + \tau_D s$, which adds a positive phase angle $\phi = +\arctan(\omega \tau_D) > 0$ (phase lead). This moves the phase curve upward away from $-180^\circ$, increasing the phase margin and damping closed-loop oscillations. Option A is correct. Step 2: Analyze anticipatory control action (Option B): Derivative mode output is given by $p_D(t) = K_c \tau_D \frac{de(t)}{dt}$. When the error changes rapidly, derivative action produces an immediate opposing output before the error grows large, providing anticipatory action. Option B is correct. Step 3: Analyze incorrect statements (Options C and D): - Option C is false: Integral action (not derivative) is required to eliminate steady-state offset. When the error is constant ($de/dt = 0$), derivative action contributes zero corrective output. - Option D is false: Derivative action amplifies high-frequency noise because the gain $|s| = \omega$ increases linearly with frequency, which is why commercial controllers require a first-order derivative filter.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Process Control is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Process Control is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas