ExamPass EngineeringExamPass Engineering Start free
FE Chemical · Knowledge area 16 of 17

Solids Handling on the FE Chemical exam

Solids Handling accounts for 4 of the 110 questions — 3.6% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions4
Share of exam3.6%
Rank by weight16/17
In our bank15

What Solids Handling covers

On the FE Chemical exam this area covers particle size and distribution, size reduction, screening and classification, filtration, sedimentation, fluidisation, and solids transport and storage.

What the questions look like: A terminal settling velocity, a filtration rate, or a screen efficiency.

Worth knowing cold: Settling problems hinge on the flow regime around the particle. Check whether Stokes’ law applies before using it.

3 free Solids Handling practice problems

These come from our FE Chemical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A high-efficiency cyclone separator of standard Stairmand geometry has a barrel diameter of $D_c = 0.60\text{ m}$. The rectangular tangential gas inlet has height $a = 0.50 D_c = 0.30\text{ m}$ and width $b = 0.20 D_c = 0.12\text{ m}$. Air at $20^\circ\text{C}$ and $101.3\text{ kPa}$ ($\rho_g = 1.20\text{ kg/m}^3$, viscosity $\mu = 1.81 \times 10^{-5}\text{ Pa}\cdot\text{s}$) carrying mineral dust (particle density $\rho_p = 2200\text{ kg/m}^3$) enters at a volumetric flow rate of $Q = 1.08\text{ m}^3/\text{s}$. Assuming an effective number of vortex turns $N_e = 5.0$, the cut diameter ($d_{50}$, the particle size collected with $50\%$ efficiency) is most nearly:

  1. A1.85 µm
  2. B3.07 µmcorrect
  3. C4.82 µm
  4. D6.50 µm
Show the solution

Step 1: Calculate the gas inlet velocity: $$A_{in} = a \times b = 0.30\text{ m} \times 0.12\text{ m} = 0.0360\text{ m}^2$$ $$v_i = \dfrac{Q}{A_{in}} = \dfrac{1.08\text{ m}^3/\text{s}}{0.0360\text{ m}^2} = 30.0\text{ m/s}$$ Step 2: Recall the Lapple cyclone cut diameter formula from the FE Reference Handbook: $$d_{50} = \sqrt{\dfrac{9 \mu b}{2\pi N_e v_i (\rho_p - \rho_g)}}$$ Step 3: Evaluate numerator and denominator: $$\text{Numerator} = 9 \times (1.81 \times 10^{-5}\text{ Pa}\cdot\text{s}) \times 0.12\text{ m} = 1.9548 \times 10^{-5}\text{ kg/s}$$ $$\text{Denominator} = 2\pi \times 5.0 \times 30.0\text{ m/s} \times (2200 - 1.2)\text{ kg/m}^3$$ $$\text{Denominator} = 300\pi \times 2198.8 = 942.478 \times 2198.8 = 2.0723 \times 10^6\text{ kg}/(\text{m}\cdot\text{s})$$ Step 4: Compute the cut diameter: $$d_{50}^2 = \dfrac{1.9548 \times 10^{-5}}{2.0723 \times 10^6} = 9.4330 \times 10^{-12}\text{ m}^2$$ $$d_{50} = \sqrt{9.4330 \times 10^{-12}} = 3.0713 \times 10^{-6}\text{ m} = 3.07\text{ }\mu\text{m}$$ Distractor Analysis: - Option A (1.85 µm) omits the factor of 9 in the Stokes drag numerator. - Option C (4.82 µm) uses the inlet height $a = 0.30\text{ m}$ instead of the radial width $b = 0.12\text{ m}$. - Option D (6.50 µm) forgets the square root operation on the calculated variance.

Problem 2

A Lapple standard configuration cyclone separator removes solid catalyst fines (particle density $\rho_p = 1800\text{ kg/m}^3$) from an air stream (gas density $\rho_g = 1.20\text{ kg/m}^3$, dynamic viscosity $\mu = 1.85 \times 10^{-5}\text{ Pa}\cdot\text{s}$). The rectangular inlet duct width is $W = 0.150\text{ m}$, the gas inlet velocity is $v_i = 18.0\text{ m/s}$, and the effective number of spiral vortex turns in the cyclone body is $N_e = 5.0$. According to the Lapple cut diameter equation from the NCEES FE Reference Handbook: $$d_{pc} = \sqrt{\frac{9 \mu W}{2 \pi N_e v_i (\rho_p - \rho_g)}}$$ The cut diameter $d_{pc}$ ($50\%$ collection efficiency diameter, in micrometers, $\mu\text{m}$) is most nearly:

Show the solution

Step 1: Calculate the numerator term inside the square root from the NCEES FE Reference Handbook: $$\text{Numerator} = 9 \mu W = 9 \times (1.85 \times 10^{-5}\text{ Pa}\cdot\text{s}) \times (0.150\text{ m}) = 2.4975 \times 10^{-5}\text{ kg/s}$$ Step 2: Calculate the denominator term inside the square root: $$\text{Density difference} = \rho_p - \rho_g = 1800 - 1.20 = 1798.8\text{ kg/m}^3$$ $$\text{Denominator} = 2 \pi N_e v_i (\rho_p - \rho_g)$$ $$\text{Denominator} = 2 \times \pi \times (5.0) \times (18.0\text{ m/s}) \times (1798.8\text{ kg/m}^3)$$ $$\text{Denominator} = (31.4159) \times (18.0) \times (1798.8) \approx 565.487 \times 1798.8 \approx 1.01720 \times 10^6\text{ kg}/(\text{m}^2\cdot\text{s})$$ Step 3: Evaluate the ratio and take the square root: $$\frac{2.4975 \times 10^{-5}}{1.01720 \times 10^6} \approx 2.45527 \times 10^{-11}\text{ m}^2$$ $$d_{pc} = \sqrt{2.45527 \times 10^{-11}\text{ m}^2} \approx 4.955 \times 10^{-6}\text{ m}$$ Step 4: Convert to micrometers ($\mu\text{m}$): $$d_{pc} = (4.955 \times 10^{-6}\text{ m}) \times (10^6\ \mu\text{m/m}) \approx 4.96\ \mu\text{m}$$ Distractor Analysis: - Omitting the factor of $2\pi$ yields $\sqrt{2.4975 \times 10^{-5} / 161892} = 1.24 \times 10^{-5}\text{ m} = 12.4\ \mu\text{m}$. - Using diameter instead of width $W$ inflates cut size.

Problem 3

A standard Lapple reverse-flow cyclone dust separator (body diameter $D_c = 0.500\text{ m}$, inlet width $W = D_c / 4 = 0.125\text{ m}$, inlet height $H = D_c / 2 = 0.250\text{ m}$, number of effective turns $N_e = 5.0$) treats dusty flue gas (density $\rho = 1.20\text{ kg/m}^3$, viscosity $\mu = 1.85 \times 10^{-5}\text{ Pa}\cdot\text{s}$) at an inlet velocity of $v_{in} = 15.0\text{ m/s}$. The solid particulates have density $\rho_p = 2000.0\text{ kg/m}^3$. In accordance with the Lapple cyclone cut diameter formula from the NCEES FE Reference Handbook ($d_{pc} = \sqrt{\frac{9 \mu W}{2 \pi N_e v_{in} (\rho_p - \rho)}}$), the aerodynamic cut diameter ($d_{pc}$, corresponding to $50\%$ collection efficiency, in micrometers $\mu\text{m}$) is most nearly:

  1. Ad_pc = 2.35 μm
  2. Bd_pc = 4.70 μmcorrect
  3. Cd_pc = 7.15 μm
  4. Dd_pc = 10.5 μm
Show the solution

Step 1: Calculate the numerator of the Lapple cut diameter expression from the NCEES FE Reference Handbook: $$\text{Numerator} = 9 \mu W = 9 \times (1.85 \times 10^{-5}\text{ Pa}\cdot\text{s}) \times (0.125\text{ m}) = 2.08125 \times 10^{-5}\text{ kg/s}$$ Step 2: Calculate the denominator: $$\Delta \rho = \rho_p - \rho = 2000.0\text{ kg/m}^3 - 1.20\text{ kg/m}^3 = 1998.8\text{ kg/m}^3$$ $$\text{Denominator} = 2 \pi N_e v_{in} \Delta \rho = 2 \times \pi \times 5.0 \times (15.0\text{ m/s}) \times (1998.8\text{ kg/m}^3)$$ $$\text{Denominator} = (150.0 \pi) \times (1998.8) = (471.2389) \times (1998.8) \approx 941,912.3\text{ kg}/(\text{m}\cdot\text{s})$$ Step 3: Compute $d_{pc}^2$ and cut diameter $d_{pc}$: $$d_{pc}^2 = \frac{2.08125 \times 10^{-5}}{941,912.3} \approx 2.20960 \times 10^{-11}\text{ m}^2$$ $$d_{pc} = \sqrt{2.20960 \times 10^{-11}} \approx 4.7006 \times 10^{-6}\text{ m} = 4.7006\ \mu\text{m} \approx 4.70\ \mu\text{m}$$ Distractor Analysis: - Option A: Omits factor of 9 in numerator ($d_{pc} = 4.70 / 3 = 1.57\ mu\text{m}$ or uses $2N_e$). - Option B: Correct. - Option C: Uses $N_e = 2.0$. - Option D: Uses $v_{in} = 5.0\text{ m/s}$.

Find out where you actually stand

A free 20-question diagnostic across every FE Chemical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Solids Handling is where your time should go at all.

Start the free Chemical diagnostic

Retaking the FE Chemical exam?

Copy the scores from your NCEES diagnostic report and see whether Solids Handling is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Chemical knowledge areas