ExamPass EngineeringExamPass Engineering Start free
FE Environmental · Knowledge area 7 of 15

Environmental Chemistry on the FE Environmental exam

Environmental Chemistry accounts for 8 of the 110 questions — 7.3% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions8
Share of exam7.3%
Rank by weight7/15
In our bank27

What Environmental Chemistry covers

On the FE Environmental exam this area covers stoichiometry and reaction kinetics in environmental systems, equilibrium, acid-base chemistry and alkalinity, solubility, oxidation and reduction, and organic chemistry of contaminants.

What the questions look like: A concentration conversion, an alkalinity or hardness computation, or a reaction-rate problem.

Worth knowing cold: Concentration units are the hazard here: mg/L, meq/L and mg/L as CaCO3 are not the same number.

3 free Environmental Chemistry practice problems

These come from our FE Environmental bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A raw surface water sample has a measured $\text{pH}$ of $7.40$ and contains the following analytical concentrations at $25^\circ\text{C}$: bicarbonate ion $[\text{HCO}_3^-] = 183.0\text{ mg/L}$ and carbonate ion $[\text{CO}_3^{2-}] = 0.60\text{ mg/L}$. At this neutral pH, hydroxide and hydronium ion contributions to alkalinity are negligible. Given the equivalent weights of $\text{HCO}_3^- = 61.02\text{ mg/meq}$, $\text{CO}_3^{2-} = 30.005\text{ mg/meq}$, and $\text{CaCO}_3 = 50.045\text{ mg/meq}$, what is the total alkalinity expressed in $\text{mg/L as }\text{CaCO}_3$?

  1. A184 mg/L as CaCO₃, directly summing mass concentrations without equivalent weights
  2. B151 mg/L as CaCO₃correct
  3. C301 mg/L as CaCO₃, doubling the carbonate valence factor incorrectly
  4. D75.5 mg/L as CaCO₃, dividing by calcium equivalent weight instead of CaCO₃
Show the solution

Alkalinity represents the acid-neutralizing capacity of an aqueous solution, expressed as an equivalent mass of calcium carbonate: $\text{Alkalinity (meq/L)} = [\text{HCO}_3^-] + 2[\text{CO}_3^{2-}] + [\text{OH}^-] - [\text{H}^+]$. When converting from mass concentrations (mg/L) to chemical milliequivalents (meq/L), each species concentration is divided by its equivalent weight ($\text{EW} = \text{Molecular Weight} / |z|$). Step 1: Normality of bicarbonate: $\dfrac{183.0\text{ mg/L}}{61.02\text{ mg/meq}} = 2.999\text{ meq/L}$. Step 2: Normality of carbonate: $\dfrac{0.60\text{ mg/L}}{30.005\text{ mg/meq}} = 0.020\text{ meq/L}$. Step 3: Total alkalinity in meq/L: $2.999 + 0.020 = 3.019\text{ meq/L}$. Step 4: Convert meq/L to mg/L as $\text{CaCO}_3$ by multiplying by the equivalent weight of $\text{CaCO}_3$ ($50.045\text{ mg/meq}$): $\text{Alkalinity} = 3.019\text{ meq/L} \times 50.045\text{ mg/meq} = 151.09\text{ mg/L as }\text{CaCO}_3 \approx 151\text{ mg/L}$. Simply adding $183 + 0.6 = 183.6\text{ mg/L}$ is incorrect because mass units do not reflect proton-accepting equivalence.

Problem 2

A metal finishing facility discharges rinse water containing cadmium at an initial concentration of [Cd²⁺]o = 45.0 mg/L (molecular weight of cadmium MW = 112.41 g/mol). Environmental discharge regulations stipulate that the final effluent cadmium concentration must not exceed [Cd²⁺]target = 0.050 mg/L. Chemical precipitation as cadmium hydroxide, Cd(OH)₂(s), is implemented at 25°C. The solubility product constant is Ksp = 7.20 × 10⁻¹⁵ and the water ion product is Kw = 1.00 × 10⁻¹⁴: \[ Cd(OH)_{2(s)} \rightleftharpoons Cd^{2+} + 2 OH^- \] Assuming activity coefficients equal to unity, calculate the minimum theoretical pH required to depress the dissolved cadmium concentration down to the compliance target of 0.050 mg/L.

  1. ApH = 8.65
  2. BpH = 10.10correct
  3. CpH = 11.45
  4. DpH = 7.20
Show the solution

1. TARGET MOLAR CONCENTRATION OF CADMIUM: $$[Cd^{2+}]_{\text{target}} = \frac{0.050 \times 10^{-3}\text{ g/L}}{112.41\text{ g/mol}} = 4.448 \times 10^{-7}\text{ mol/L} = 4.45 \times 10^{-7}\text{ M}$$ 2. SOLUBILITY EQUILIBRIUM: $$Cd(OH)_{2(s)} \rightleftharpoons Cd^{2+} + 2 OH^-$$ $$K_{sp} = [Cd^{2+}][OH^-]^2 = 7.20 \times 10^{-15}$$ 3. HYDROXIDE ION CONCENTRATION: $$[OH^-]^2 = \frac{K_{sp}}{[Cd^{2+}]_{\text{target}}} = \frac{7.20 \times 10^{-15}}{4.448 \times 10^{-7}\text{ M}} = 1.6187 \times 10^{-8}\text{ M}^2$$ $$[OH^-] = \sqrt{1.6187 \times 10^{-8}} = 1.2723 \times 10^{-4}\text{ M}$$ 4. pOH AND REQUIRED pH: $$pOH = -\log_{10}(1.2723 \times 10^{-4}) = 3.8954$$ $$pH = 14.00 - pOH = 14.00 - 3.8954 = 10.1046 \approx 10.10$$ DISTRACTOR RATIONALE: - Option A (8.65) ignores the square in the hydroxide term ($[Cd^{2+}][OH^-] = K_{sp}$). - Option C (11.45) fails to convert mg/L to molarity. - Option D (7.20) assumes neutral precipitation, which is chemically insufficient.

Problem 3

In an anoxic groundwater aquifer undergoing biological denitrification, nitrate is reduced to nitrogen gas at 25°C according to the reduction half-reaction: 0.20 NO₃⁻ + 1.20 H⁺ + e⁻ ⇌ 0.10 N₂(g) + 0.60 H₂O, with standard reduction potential E° = +1.250 V (pe° = 21.13). The aquifer water has pH = 7.00, nitrate ion concentration [NO₃⁻] = 1.0 × 10⁻⁴ mol/L (6.2 mg/L), and dissolved nitrogen gas partial pressure P_N₂ = 0.80 atm (activity of water is 1.0). Using the Nernst equation Eh = E° - (0.05916/n)·log₁₀(Q_red) where Q_red = (P_N₂)^0.10 / ([NO₃⁻]^0.20 · [H⁺]^1.20), calculate the oxidation-reduction potential Eh and the dimensionless electron activity pe = Eh / 0.05916.

  1. ARedox potential Eh = +545 mV (Electron activity pe = 9.21)
  2. BRedox potential Eh = +706 mV (Electron activity pe = 11.94)correct
  3. CRedox potential Eh = +865 mV (Electron activity pe = 14.62)
  4. DRedox potential Eh = +420 mV (Electron activity pe = 7.10)
Show the solution

**Step 1: Formulate the reaction quotient ($Q_{red}$)** At $\text{pH} = 7.00$, $[\text{H}^+] = 1.0 \times 10^{-7}\text{ mol/L}$. The reaction quotient for 1 electron ($n = 1$) is: $$Q_{red} = \frac{(P_{\text{N}_2})^{0.10}}{[\text{NO}_3^-]^{0.20} \cdot [\text{H}^+]^{1.20}}$$ Evaluate terms: - $(P_{\text{N}_2})^{0.10} = (0.80)^{0.10} = 0.97793$ - $[\text{NO}_3^-]^{0.20} = (1.0 \times 10^{-4})^{0.20} = 0.15849$ - $[\text{H}^+]^{1.20} = (10^{-7.0})^{1.20} = 10^{-8.40} = 3.9811 \times 10^{-9}$ - $\text{Denominator} = 0.15849 \times 3.9811 \times 10^{-9} = 6.3096 \times 10^{-10}$ $$Q_{red} = \frac{0.97793}{6.3096 \times 10^{-10}} = 1.5499 \times 10^9$$ **Step 2: Compute redox potential ($E_h$) via Nernst equation** $$\log_{10}(Q_{red}) = \log_{10}(1.5499 \times 10^9) = 9.1903$$ $$E_h = E^\circ - 0.05916 \times \log_{10}(Q_{red}) = 1.250 - 0.05916 \times 9.1903$$ $$E_h = 1.250 - 0.5437 = 0.7063\text{ V} = +706.3\text{ mV} \approx +706\text{ mV}$$ **Step 3: Calculate electron activity ($pe$)** $$pe = \frac{E_h}{0.05916\text{ V}} = \frac{0.7063}{0.05916} = 11.939 \approx 11.94$$ **Distractor Rationale:** - Option A forgets the proton exponent ($[\text{H}^+]$ instead of $[\text{H}^+]^{1.20}$), computing $E_h = +545\text{ mV}$. - Option C calculates $E_h$ for pure water without the nitrate concentration factor. - Option D forgets to multiply by $0.05916$.

Find out where you actually stand

A free 20-question diagnostic across every FE Environmental knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Environmental Chemistry is where your time should go at all.

Start the free Environmental diagnostic

Retaking the FE Environmental exam?

Copy the scores from your NCEES diagnostic report and see whether Environmental Chemistry is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Environmental knowledge areas