ExamPass EngineeringExamPass Engineering Start free
FE Environmental · Knowledge area 6 of 15

Fundamental Principles on the FE Environmental exam

Fundamental Principles accounts for 8 of the 110 questions — 7.3% of your exam. It sits in the middle of the paper by weight: too big to skip, not big enough to dominate your plan.

Questions8
Share of exam7.3%
Rank by weight6/15
In our bank27

What Fundamental Principles covers

On the FE Environmental exam this area covers units and dimensional analysis, mass and energy balances, fluid and thermal fundamentals, basic chemistry, and statistics as applied to environmental systems.

What the questions look like: A unit conversion, a simple balance, or a fundamental property computation.

Worth knowing cold: This area is the one where careless unit handling costs the most. Carry units through every line.

3 free Fundamental Principles practice problems

These come from our FE Environmental bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A hazardous wastewater stream carries an organic contaminant that undergoes first-order chemical degradation with reaction rate constant $k = 0.15\text{ hr}^{-1}$. An environmental engineer compares an ideal Continuous-Flow Stirred Tank Reactor (CSTR) and an ideal Plug Flow Reactor (PFR), each designed with an identical hydraulic detention time of $\theta = 8.0\text{ hours}$. What is the ratio of the effluent contaminant concentration exiting the CSTR to that exiting the PFR ($\dfrac{C_{\text{CSTR}}}{C_{\text{PFR}}}$)?

  1. A1.00, assuming identical performance for equal detention time
  2. B1.51correct
  3. C2.20, taking the inverse of the CSTR retention factor alone
  4. D0.66, inverting the reactor performance ratio
Show the solution

Reactor hydraulics directly govern chemical reaction conversion for any non-zero-order reaction kinetics. In an ideal CSTR, complete backmixing dilutes the reactant immediately to effluent levels, reducing the reaction rate throughout the tank: $\dfrac{C_{\text{CSTR}}}{C_0} = \dfrac{1}{1 + k \theta}$. In an ideal PFR, fluid elements travel with no axial mixing, maintaining high reactant concentration along the length: $\dfrac{C_{\text{PFR}}}{C_0} = e^{-k \theta}$. Step 1: For $k = 0.15\text{ hr}^{-1}$ and $\theta = 8.0\text{ hr}$, the dimensionless Damköhler number is $k \theta = 0.15 \times 8.0 = 1.20$. Step 2: CSTR remaining fraction: $\dfrac{C_{\text{CSTR}}}{C_0} = \dfrac{1}{1 + 1.20} = \dfrac{1}{2.20} = 0.4545$ ($54.55\%$ conversion). Step 3: PFR remaining fraction: $\dfrac{C_{\text{PFR}}}{C_0} = e^{-1.20} = 0.3012$ ($69.88\%$ conversion). Step 4: Effluent concentration ratio: $\dfrac{C_{\text{CSTR}}}{C_{\text{PFR}}} = \dfrac{0.4545}{0.3012} = 1.509 \approx 1.51$. The CSTR leaves $51\%$ more unreacted contaminant in the discharge, proving why PFRs or multiple CSTRs in series are preferred for high-conversion wastewater treatment.

Problem 2

An industrial cyanide detoxification system treats an aqueous stream with an inflow rate of Q = 20.0 m³/h. The raw influent contaminant concentration is C₀ = 120.0 mg/L. The process is configured as a two-stage cascade of two identical continuous stirred-tank reactors (CSTRs) operating in series (V₁ = V₂ = 50.0 m³, each with hydraulic detention time θ = 2.50 h). The chemical destruction reaction exhibits first-order kinetics with a degradation reaction rate constant of k = 0.80 h⁻¹ in both tanks. For a steady-state first-order CSTR, the mass balance relation is: $$C_n = \frac{C_{n-1}}{1 + k \cdot \theta}$$ Calculate the intermediate concentration exiting Reactor 1 (C₁ in mg/L), the final effluent concentration exiting Reactor 2 (C₂ in mg/L), and the cumulative overall destruction efficiency (η in %).

  1. ACout = 25.0 mg/L; Cmid = 55.0 mg/L; η = 79.2%
  2. BCout = 20.0 mg/L; Cmid = 48.0 mg/L; η = 83.3%
  3. CCout = 16.5 mg/L; Cmid = 44.0 mg/L; η = 86.3%
  4. DCout = 13.3 mg/L; Cmid = 40.0 mg/L; η = 88.9%correct
Show the solution

1. HYDRAULIC DETENTION TIME PER TANK (θ): For each reactor: $$\theta = \frac{V_1}{Q} = \frac{50.0\text{ m}^3}{20.0\text{ m}^3/\text{h}} = 2.50\text{ h}$$ The reaction Damköhler number is: $$Da = k \cdot \theta = 0.80\text{ h}^{-1} \times 2.50\text{ h} = 2.00$$ 2. REACTOR 1 EFFLUENT CONCENTRATION (C1): Applying the steady-state CSTR balance: $$C_1 = \frac{C_0}{1 + k \cdot \theta} = \frac{120.0\text{ mg/L}}{1 + 2.00} = \frac{120.0}{3.00} = 40.0\text{ mg/L}$$ First-stage removal efficiency: $$\eta_1 = \frac{120.0 - 40.0}{120.0} = \frac{80.0}{120.0} = 66.7\%$$ 3. REACTOR 2 EFFLUENT CONCENTRATION (C2): Reactor 1 effluent forms the feed to Reactor 2: $$C_2 = \frac{C_1}{1 + k \cdot \theta} = \frac{40.0\text{ mg/L}}{1 + 2.00} = \frac{40.0}{3.00} = 13.333\text{ mg/L} \approx 13.3\text{ mg/L}$$ 4. OVERALL TWO-STAGE SYSTEM REMOVAL EFFICIENCY (η): $$\eta = \frac{C_0 - C_2}{C_0} = \frac{120.0 - 13.333}{120.0} = \frac{106.667}{120.0} = 0.88889 = 88.89\% \approx 88.9\%$$ (Note: A single 100 m³ CSTR with $\theta = 5.0\text{ h}$ would achieve $C = 120 / (1 + 0.80 \times 5.0) = 24.0\text{ mg/L}$, or only $80.0\%$ conversion. Staging two 50 m³ CSTRs in series increases conversion to $88.9\%$ by reducing backmixing). DISTRACTOR RATIONALE: - Option A (C2 = 25.0 mg/L) erroneously evaluates a single combined tank of 100 m³. - Option B (C2 = 20.0 mg/L) assumes linear zero-order kinetics. - Option C (C2 = 16.5 mg/L) applies an incorrect detention time θ = 2.0 h.

Problem 3

A completely mixed wastewater treatment reactor (CSTR) treats an industrial effluent stream flowing at $Q = 2500\text{ m}^3\text{/day}$ with an influent organic pollutant concentration of $C_{in} = 180\text{ mg/L}$, as shown in the schematic. The target effluent standard is $C_{out} = 25\text{ mg/L}$. The pollutant degrades according to first-order reaction kinetics with a decay rate constant $k = 0.40\text{ day}^{-1}$. In accordance with steady-state mass balance equations from the NCEES FE Reference Handbook ($0 = Q C_{in} - Q C_{out} - k V C_{out}$), the required reactor volume $V$ in cubic meters is most nearly:

  1. A38,800 m³correct
  2. B24,500 m³
  3. C45,200 m³
  4. D52,000 m³
Show the solution

Step 1: Set up the steady-state mass balance around the CSTR: For a continuous stirred tank reactor with first-order decay at steady state ($V \frac{dC}{dt} = 0$): $$0 = Q C_{in} - Q C_{out} - r V$$ Since $r = k C_{out}$ (the internal concentration equals the effluent concentration): $$Q (C_{in} - C_{out}) = k V C_{out}$$ Step 2: Solve for the hydraulic retention time $\theta = \frac{V}{Q}$: $$\theta = \frac{C_{in} - C_{out}}{k C_{out}} = \frac{180\text{ mg/L} - 25\text{ mg/L}}{(0.40\text{ day}^{-1})(25\text{ mg/L})} = \frac{155}{10.0} = 15.50\text{ days}$$ Step 3: Calculate the required reactor volume $V$: $$V = Q \times \theta = 2500\text{ m}^3\text{/day} \times 15.50\text{ days} = 38750\text{ m}^3 \approx 38800\text{ m}^3$$ Distractor Analysis: - Option A: Correct. - Option B: Erroneously applies the plug-flow reactor (PFR) logarithmic formula: V = (Q/k) ln(Cin/Cout) = 12338 m³, multiplied by 2: 24,500 m³. - Option C: Uses average concentration (Cin+Cout)/2 in the decay term: 45,200 m³. - Option D: Neglects the effluent concentration in the denominator, dividing by k*Cin: 52,000 m³.

Find out where you actually stand

A free 20-question diagnostic across every FE Environmental knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Fundamental Principles is where your time should go at all.

Start the free Environmental diagnostic

Retaking the FE Environmental exam?

Copy the scores from your NCEES diagnostic report and see whether Fundamental Principles is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Environmental knowledge areas