ExamPass EngineeringExamPass Engineering Start free
FE Environmental · Knowledge area 13 of 15

Health Hazards and Risk Assessment on the FE Environmental exam

Health Hazards and Risk Assessment accounts for 4 of the 110 questions — 3.6% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions4
Share of exam3.6%
Rank by weight13/15
In our bank16

What Health Hazards and Risk Assessment covers

On the FE Environmental exam this area covers exposure pathways and routes, dose-response relationships, toxicity and exposure limits, risk characterisation, and industrial hygiene fundamentals.

What the questions look like: A dose or intake computation, a risk estimate from a slope factor, or an exposure limit comparison.

Worth knowing cold: Intake equations have many terms and all of them are given. Set the equation up fully before substituting.

3 free Health Hazards and Risk Assessment practice problems

These come from our FE Environmental bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A municipal drinking water well contains trichloroethylene (TCE) at a steady concentration of $C = 0.025\text{ mg/L}$. The oral cancer slope factor for TCE is $SF = 0.046\text{ (mg/kg}\cdot\text{day})^{-1}$. An adult weighing $70\text{ kg}$ consumes $2.0\text{ L/day}$ of this tap water over an exposure duration of $30\text{ years}$, with an exposure frequency of $350\text{ days/year}$. Under standard US EPA and NCEES risk assessment methodology with a lifetime averaging time of $70\text{ years}$ ($25{,}550\text{ days}$), what is the estimated incremental lifetime cancer risk?

  1. A1.35e-5 (or 1.35 × 10⁻⁵)correct
  2. B3.15e-5 (or 3.15 × 10⁻⁵), using the 30-year exposure duration as lifetime averaging time
  3. C2.94e-4 (or 2.94 × 10⁻⁴), reporting the lifetime average daily dose without slope factor
  4. D6.75e-6 (or 6.75 × 10⁻⁶), assuming an ingestion rate of 1.0 L/day instead of 2.0 L/day
Show the solution

In environmental health risk assessment, chemical carcinogenesis is evaluated on a lifetime basis under the linear no-threshold model: $\text{Risk} = \text{LADD} \times SF$, where LADD is the Lifetime Average Daily Dose. Step 1: LADD equation from the NCEES Handbook: $\text{LADD} = \dfrac{C \times IR \times EF \times ED}{BW \times AT}$. Substitute default exposure factors: $C = 0.025\text{ mg/L}$, ingestion rate $IR = 2.0\text{ L/day}$, exposure frequency $EF = 350\text{ days/year}$, exposure duration $ED = 30\text{ years}$, body weight $BW = 70\text{ kg}$, and lifetime averaging time $AT = 70\text{ years} \times 365\text{ days/year} = 25{,}550\text{ days}$. Step 2: Compute LADD: $\text{LADD} = \dfrac{0.025 \times 2.0 \times 350 \times 30}{70 \times 25{,}550} = \dfrac{525}{1{,}788{,}500} = 2.9354 \times 10^{-4}\text{ mg/(kg}\cdot\text{day)}$. Step 3: Compute lifetime excess cancer risk: $\text{Risk} = 2.9354 \times 10^{-4} \times 0.046 = 1.350 \times 10^{-5} \approx 1.35 \times 10^{-5}$. Because this risk exceeds the EPA de minimis benchmark of $1 \times 10^{-6}$ (one in a million), treatment (such as granular activated carbon or air stripping) is required.

Problem 2

An environmental engineer performs personal noise dosimetry on an operator in a municipal wastewater blower facility over an 8.0-hour work shift. The recorded sound level exposures are: 2.0 hours at 95 dBA, 3.0 hours at 90 dBA, and 3.0 hours at 80 dBA. Under OSHA Occupational Noise Exposure regulations (29 CFR 1910.95), the reference permissible duration is T = 8 / 2^[(L - 90)/5] hours, the noise dose is D = 100 · Σ(C_i / T_i)%, and the 8-hour Time-Weighted Average is TWA = 16.61 · log₁₀(D / 100) + 90.0 dBA. What are the cumulative noise dose (D) and equivalent 8-hour TWA, and what is the regulatory compliance status relative to the OSHA Permissible Exposure Limit (PEL = 90 dBA) and Action Level (85 dBA)?

  1. A125% (TWA = 91.6 dBA)
  2. B62.5% (TWA = 86.4 dBA)
  3. C96.9% (TWA = 89.8 dBA, exceeding Action Level but within PEL)correct
  4. D87.5% (TWA = 88.9 dBA)
Show the solution

1. REFERENCE PERMISSIBLE DURATIONS (5-dBA EXCHANGE RATE): Under OSHA 29 CFR 1910.95: - For $L_1 = 95\text{ dBA}$: $T_1 = \frac{8}{2^{(95-90)/5}} = \frac{8}{2^1} = 4.00\text{ hours}$ - For $L_2 = 90\text{ dBA}$: $T_2 = \frac{8}{2^{(90-90)/5}} = \frac{8}{2^0} = 8.00\text{ hours}$ - For $L_3 = 80\text{ dBA}$: $T_3 = \frac{8}{2^{(80-90)/5}} = \frac{8}{2^{-2}} = 8 \times 4 = 32.00\text{ hours}$ 2. CUMULATIVE DAILY NOISE DOSE (D): $$D = 100 \times \left( \frac{C_1}{T_1} + \frac{C_2}{T_2} + \frac{C_3}{T_3} \right) = 100 \times \left( \frac{2.00}{4.00} + \frac{3.00}{8.00} + \frac{3.00}{32.00} \right)$$ $$D = 100 \times (0.5000 + 0.3750 + 0.09375) = 100 \times 0.96875 = 96.875\% \approx 96.9\%$$ 3. EQUIVALENT 8-HOUR TIME-WEIGHTED AVERAGE (TWA): $$TWA = 16.61 \log_{10}\left(\frac{D}{100}\right) + 90.0$$ $$\frac{D}{100} = 0.96875 \implies \log_{10}(0.96875) = -0.013788$$ $$TWA = 16.61(-0.013788) + 90.0 = -0.229 + 90.0 = 89.771\text{ dBA} \approx 89.8\text{ dBA}$$ 4. REGULATORY COMPLIANCE INTERPRETATION: The calculated TWA of 89.8 dBA (D = 96.9%) exceeds the OSHA Action Level of 85.0 dBA (D = 50%), requiring the facility to enroll the employee in an OSHA Hearing Conservation Program (annual audiograms, training, and hearing protection). However, it remains below the 90.0 dBA PEL (D = 100%), so engineering noise controls are not legally mandated. DISTRACTOR RATIONALE: - Option A (125%, 91.6 dBA) applies a 3-dBA exchange rate (NIOSH criterion), which is more stringent than OSHA regulations. - Option B (62.5%, 86.4 dBA) omits the 95 dBA high-exposure period. - Option D (87.5%, 88.9 dBA) omits the 80 dBA background exposure.

Problem 3

A residential neighborhood is situated 800 m downwind of a commercial composite resin manufacturing plant. Gaussian atmospheric dispersion modeling predicts an annual average ground-level formaldehyde (HCHO) concentration of C_air = 4.80 μg/m³ (4.80 × 10⁻³ mg/m³). Under EPA Risk Assessment Guidance for Superfund (RAGS Part A/F), exposure parameters for an adult resident are: inhalation rate IR = 16.0 m³/day, exposure frequency EF = 350 days/year, exposure duration ED = 24 years, body weight BW = 70.0 kg, and averaging time for non-carcinogenic chronic effects AT_nc = 24 yr × 365 days/yr = 8,760 days. The EPA inhalation Reference Concentration is RfC = 9.80 μg/m³ (equivalent to RfD_inh = 2.24 × 10⁻³ mg/(kg·day)) and the Inhalation Unit Risk is IUR = 1.30 × 10⁻⁵ (μg/m³)⁻¹ (evaluated over lifetime AT_c = 70 yr × 365 d/yr = 25,550 days). Determine the Chronic Daily Intake (CDI_inh), the non-carcinogenic Hazard Quotient (HQ), and the Incremental Lifetime Cancer Risk (ILCR).

  1. AChronic daily intake = 0.00210 mg/(kg·d) (Hazard quotient = 0.94, Cancer risk = 4.10 × 10⁻⁵)
  2. BChronic daily intake = 0.00105 mg/(kg·d) (Hazard quotient = 0.47, Cancer risk = 2.05 × 10⁻⁵)correct
  3. CChronic daily intake = 0.00072 mg/(kg·d) (Hazard quotient = 0.32, Cancer risk = 1.15 × 10⁻⁵)
  4. DChronic daily intake = 0.00148 mg/(kg·d) (Hazard quotient = 0.66, Cancer risk = 3.20 × 10⁻⁵)
Show the solution

**Step 1: Calculate Chronic Daily Intake ($CDI_{\text{inh}}$)** $$CDI = \frac{C_{\text{air}} \times IR \times EF \times ED}{BW \times AT_{\text{nc}}}$$ $$CDI = \frac{(4.80 \times 10^{-3}\text{ mg/m}^3) \times (16.0\text{ m}^3/\text{d}) \times (350\text{ d/yr}) \times (24\text{ yr})}{(70.0\text{ kg}) \times (8{,}760\text{ d})} = \frac{645.12}{613{,}200} = 1.0520 \times 10^{-3}\text{ mg/(kg}\cdot\text{d)}$$ **Step 2: Calculate non-carcinogenic Hazard Quotient ($HQ$)** Using the inhalation Reference Dose ($RfD_{\text{inh}} = 2.24 \times 10^{-3}\text{ mg/(kg}\cdot\text{d)}$): $$HQ = \frac{CDI}{RfD_{\text{inh}}} = \frac{1.0520 \times 10^{-3}}{2.240 \times 10^{-3}} = 0.4696 \approx 0.47$$ (Or directly by air concentration ratio: $HQ = \frac{C_{\text{air}} \times (EF/365)}{RfC} = \frac{4.80 \times (350/365)}{9.80} = \frac{4.6027}{9.80} = 0.4697$). Since $HQ = 0.47 < 1.0$, non-carcinogenic adverse respiratory health effects are not expected. **Step 3: Calculate Incremental Lifetime Cancer Risk ($ILCR$)** Lifetime average exposure concentration ($EC$): $$EC = \frac{C_{\text{air}} \times EF \times ED}{AT_c} = \frac{4.80\ \mu\text{g/m}^3 \times 350\text{ d/yr} \times 24\text{ yr}}{25{,}550\text{ d}} = \frac{40{,}320}{25{,}550} = 1.5781\ \mu\text{g/m}^3$$ Applying the Inhalation Unit Risk ($IUR = 1.30 \times 10^{-5}\ (\mu\text{g/m}^3)^{-1}$): $$ILCR = IUR \times EC = 1.30 \times 10^{-5} \times 1.5781 = 2.0515 \times 10^{-5} = 20.5 \times 10^{-6} \approx 2.05 \times 10^{-5}$$ This risk level ($2.05 \times 10^{-5}$) falls within EPA's CERCLA acceptable risk range ($10^{-6}$ to $10^{-4}$), but exceeds the point of departure ($10^{-6}$). **Distractor Rationale:** - Option A ($CDI = 2.10 \times 10^{-3}$) assumes $IR = 32.0\text{ m}^3/\text{d}$ (extreme heavy physical exertion). - Option C ($CDI = 0.72 \times 10^{-3}$) calculates for child exposure parameters ($BW = 15\text{ kg}, IR = 10\text{ m}^3/\text{d}, ED = 6\text{ yr}$). - Option D ($CDI = 1.48 \times 10^{-3}$) averages cancer risk over 30 years rather than 70-year lifetime.

Find out where you actually stand

A free 20-question diagnostic across every FE Environmental knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Health Hazards and Risk Assessment is where your time should go at all.

Start the free Environmental diagnostic

Retaking the FE Environmental exam?

Copy the scores from your NCEES diagnostic report and see whether Health Hazards and Risk Assessment is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Environmental knowledge areas