ExamPass EngineeringExamPass Engineering Start free
FE Mechanical · Knowledge area 12 of 14

Probability and Statistics on the FE Mechanical exam

Probability and Statistics accounts for 4 of the 110 questions — 3.6% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions4
Share of exam3.6%
Rank by weight12/14
In our bank14

What Probability and Statistics covers

On the FE Mechanical exam this area covers measures of central tendency and dispersion, probability rules, conditional probability, discrete and continuous distributions, confidence intervals, hypothesis testing, and linear regression.

What the questions look like: A mean or standard deviation from a small data set, a probability from the normal or binomial distribution, or reading a confidence interval off the Handbook tables.

Worth knowing cold: Know which distribution a problem is describing before you reach for a formula. Most errors here are choosing the wrong model, not arithmetic.

3 free Probability and Statistics practice problems

These come from our FE Mechanical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

A batch of 500 manufactured parts has a mean mass of 2.40 kg with a standard deviation of 0.05 kg. Assuming a normal distribution, approximately how many parts are expected to have a mass greater than 2.50 kg? Enter a whole number only.

Show the solution

The value 2.50 kg is exactly two standard deviations above the mean: z = (2.50 - 2.40) / 0.05 = 0.10 / 0.05 = 2.0 For a standard normal distribution, the area beyond z = 2.0 (the probability of being MORE than two standard deviations above the mean) is about 0.0228, roughly 2.28%. Applied to the batch: 500 x 0.0228 = 11.4 parts Rounded to a whole number, about 11 parts. A small range is accepted because the exact tail probability beyond z = 2.0 depends on how many decimal places the standard normal table or calculator carries (0.02275 versus 0.0228 versus a quick 2.5% rule of thumb all give slightly different part counts, 11 to 12 to 13), and because the underlying question itself is inherently a rounded estimate -- you cannot literally have 11.4 parts, so any answer in the 10-13 range reflects the same correct reasoning with different rounding conventions. The "two standard deviations" landmark is worth keeping memorized directly: roughly 95% of a normal distribution falls within 2 standard deviations of the mean, split so that about 2.5% sits beyond each tail.

Problem 2

Consider the fundamental principles of statistical inference, sampling distributions, and hypothesis testing outlined in the NCEES FE Reference Handbook. Which TWO of the following statements are correct?

  1. AThe sample variance $S^2 = \frac{1}{n} \sum_{i=1}^n (X_i - \bar{X})^2$ is an unbiased estimator of the population variance $\sigma^2$ for any finite sample size $n$.
  2. BAccording to the Central Limit Theorem, the distribution of the sample mean approaches a normal distribution as $n$ increases, regardless of the underlying population shape, provided the population has a finite mean and variance.
  3. CA Type II error (denoted by $\beta$) occurs when the hypothesis test fails to reject a null hypothesis ($H_0$) that is actually false.
  4. DThe margin of error for a $(1 - \alpha)$ confidence interval for a population mean increases as the sample size $n$ increases, holding the confidence level constant.
Show the solution

From the NCEES FE Reference Handbook (Probability and Statistics): Statement B is correct: The Central Limit Theorem (CLT) establishes that for random samples of size $n$ drawn from any population with finite mean $\mu$ and finite variance $\sigma^2$, the sampling distribution of the sample mean $\bar{X}$ approaches a normal distribution $\mathcal{N}(\mu, \sigma^2/n)$ as $n \to \infty$. Statement C is correct: In statistical hypothesis testing, a Type I error (probability $\alpha$, significance level) is the error of rejecting a true null hypothesis, whereas a Type II error (probability $\beta$) occurs when the test fails to reject (accepts) a false null hypothesis. Statement A is false because dividing by $n$ produces a downward biased estimator ($E[S^2_n] = \frac{n-1}{n}\sigma^2$); Bessel's correction requires dividing by the degrees of freedom $(n - 1)$ to yield an unbiased estimator $S^2 = \frac{1}{n-1}\sum (X_i - \bar{X})^2$. Statement D is false because the margin of error is $E = z_{\alpha/2} \frac{\sigma}{\sqrt{n}}$, which is inversely proportional to $\sqrt{n}$, meaning larger sample sizes decrease the confidence interval width.

Problem 3

A precision CNC turning operation manufactures steel drive pins with specification limits on diameter of $USL = 50.150\text{ mm}$ and $LSL = 49.850\text{ mm}$ (tolerance span $T = 0.300\text{ mm}$). Statistical quality control sampling indicates a stable normal distribution with sample process mean $\bar{x} = 50.030\text{ mm}$ and sample standard deviation $s = 0.0400\text{ mm}$. In accordance with process capability definitions from the NCEES FE Reference Handbook ($C_p = \frac{USL - LSL}{6 s}$, $C_{pk} = \min\left[ \frac{USL - \bar{x}}{3 s}, \frac{\bar{x} - LSL}{3 s} \right]$), the potential process capability index ($C_p$) and actual centering capability index ($C_{pk}$) are:

  1. ACp = 0.833, Cpk = 0.750
  2. BCp = 1.250, Cpk = 1.000correct
  3. CCp = 1.500, Cpk = 1.250
  4. DCp = 1.875, Cpk = 1.500
Show the solution

Step 1: Calculate the potential process capability index ($C_p$): $$C_p = \frac{USL - LSL}{6 s} = \frac{50.150\text{ mm} - 49.850\text{ mm}}{6 \times (0.0400\text{ mm})} = \frac{0.300\text{ mm}}{0.2400\text{ mm}} = 1.250$$ Step 2: Calculate upper and lower capability metrics to determine $C_{pk}$: $$C_{pu} = \frac{USL - \bar{x}}{3 s} = \frac{50.150 - 50.030}{3 \times 0.0400} = \frac{0.120}{0.1200} = 1.000$$ $$C_{pl} = \frac{\bar{x} - LSL}{3 s} = \frac{50.030 - 49.850}{3 \times 0.0400} = \frac{0.180}{0.1200} = 1.500$$ Step 3: Determine the governing actual capability index ($C_{pk}$): $$C_{pk} = \min(C_{pu}, C_{pl}) = \min(1.000, 1.500) = 1.000$$ Distractor Analysis: - Option A: Uses $8 s$ in denominator for capability. - Option B: Correct. - Option C: Uses $C_{pl} = 1.500$ as $C_p$ and miscalculates centering. - Option D: Divides tolerance by $4 s$ instead of $6 s$.

Find out where you actually stand

A free 20-question diagnostic across every FE Mechanical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Probability and Statistics is where your time should go at all.

Start the free Mechanical diagnostic

Retaking the FE Mechanical exam?

Copy the scores from your NCEES diagnostic report and see whether Probability and Statistics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Mechanical knowledge areas

Probability and Statistics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.