ExamPass EngineeringExamPass Engineering Start free
FE Mechanical · Knowledge area 14 of 14

Engineering Economics on the FE Mechanical exam

Engineering Economics accounts for 4 of the 110 questions — 3.6% of your exam. It is one of the lighter areas, which makes it a good place to secure quick marks rather than a place to spend weeks.

Questions4
Share of exam3.6%
Rank by weight14/14
In our bank14

What Engineering Economics covers

On the FE Mechanical exam this area covers time value of money, present and future worth, annual equivalent cost, rate of return, benefit-cost analysis, depreciation, and economic life and replacement analysis.

What the questions look like: A cash-flow problem solved with one factor from the Handbook interest tables, or a straight-line depreciation or benefit-cost ratio.

Worth knowing cold: Draw the cash-flow diagram before touching the calculator. Almost every mistake in this area is a sign or a timing error, not a factor lookup.

3 free Engineering Economics practice problems

These come from our FE Mechanical bank, written to the same specification as the exam. Try each one before opening the solution.

Problem 1

An engineer deposits 5,000 USD today into an account earning 6% annual interest, compounded annually. What will the account be worth after 10 years, in dollars? Enter a number only, rounded to the nearest dollar.

Show the solution

A single present sum growing at compound interest follows the standard future-value relation: F = P (1 + i)^n Substitute: F = 5000 (1.06)^10 (1.06)^10 = 1.790847... F = 5000 (1.790847) = 8954.24 Rounded to the nearest dollar, F = 8,954 USD. A small range is accepted because (1.06)^10 is an irrational-looking decimal that different numbers of carried digits round slightly differently -- someone using a financial factor table (F/P, 6%, 10) might read 1.7908 instead of the fuller 1.790847, landing a dollar or two away, which is a rounding artifact of the lookup table, not a wrong method. The broader point worth keeping: compound interest grows the principal, not just the original deposit -- by year 10 the account has earned interest on interest for nine consecutive years, which is why 5,000 USD very nearly becomes 8,954 USD rather than the 8,000 USD a simple-interest calculation (5000 + 5000(0.06)(10)) would give.

Problem 2

A manufacturing enterprise is performing capital budgeting and economic comparisons among mutually exclusive mechanical equipment investment projects. According to the engineering economics principles and decision criteria in the NCEES FE Reference Handbook, which TWO of the following statements are mathematically and methodologically correct?

  1. AA proposed project alternative is economically acceptable if and only if its Net Present Worth (NPW) evaluated at the Minimum Attractive Rate of Return (MARR) is greater than or equal to zero ($NPW \ge 0$).
  2. BWhen comparing multiple mutually exclusive alternatives with equal service lives, selecting the alternative with the highest individual Internal Rate of Return (IRR) is guaranteed to maximize total net present profit.
  3. CWhen comparing mutually exclusive alternatives with unequal service lives using the Present Worth method, the analysis must evaluate alternatives over a common study period equal to the least common multiple (LCM) of their service lives, or evaluate Equivalent Uniform Annual Worth (EUAW) over one cycle.
  4. DThe conventional Benefit-Cost ratio criterion defines an alternative as acceptable whenever the ratio $(B - C)/I$ is strictly greater than zero, where $B$ is benefits, $C$ is operating cost, and $I$ is initial capital investment.
Show the solution

From the NCEES FE Reference Handbook (Engineering Economics — Present Worth, Annual Worth, Rate of Return, and Benefit-Cost Analysis): 1) Statement A is CORRECT: An investment is economically justifiable if its Net Present Worth (NPW) discounted at the MARR ($i$) satisfies $NPW(i) \ge 0$, meaning the project recovers capital investment, covers operating disbursements, and earns a return at least equal to MARR. 2) Statement B is FALSE: Maximizing individual internal rate of return (IRR) can lead to erroneous decisions because it fails to consider the scale of investment. A smaller project with high IRR may generate far less total net dollar profit than a larger project with lower IRR that still exceeds MARR. To select among mutually exclusive alternatives using rate of return, incremental rate of return analysis ($\Delta IRR \ge MARR$) is required. 3) Statement C is CORRECT: The Present Worth method is valid only for comparisons across identical study periods; when useful lives differ, the least common multiple (LCM) of lives must be used with repeated cycles assumption, or the Equivalent Uniform Annual Worth (EUAW) method may be used across one cycle because annual worth is independent of cycle replication. 4) Statement D is FALSE: The conventional Benefit-Cost ratio is defined as $B/C = \frac{B - \text{Disbenefits}}{\text{CR} + \text{O\&M}}$, and an alternative is justified when $B/C \ge 1.0$ (not $> 0$). Therefore, statements A and C are the only two correct assertions.

Problem 3

A mechanical ventilation upgrade costs 60,000 USD at year 0 and provides net annual energy savings of 12,000 USD/year at the end of each year for a useful life of 8 years with zero salvage value. The company's MARR is $i = 8.0\%$ per year. In accordance with Capital Recovery and Present Worth relationships from the NCEES FE Reference Handbook ($(A/P, i, n) = \frac{i(1+i)^n}{(1+i)^n - 1}$), the Equivalent Uniform Annual Worth ($EUAW$, in USD/year) of the investment is most nearly:

  1. A820 USD/yr
  2. B1,560 USD/yrcorrect
  3. C2,450 USD/yr
  4. D3,120 USD/yr
Show the solution

Step 1: Calculate the Capital Recovery factor ($(A/P, 8\%, 8)$): $$(1 + i)^n = (1.080)^8 = 1.850930$$ $$(A/P, 8\%, 8) = \frac{0.080 \times 1.850930}{1.850930 - 1.000} = \frac{0.148074}{0.850930} = 0.174015$$ Step 2: Calculate the annual capital recovery cost of the initial expenditure ($CR$): $$CR = C_0 (A/P, 8\%, 8) = (60,000\text{ USD}) \times (0.174015) = 10,440.9\text{ USD/year}$$ Step 3: Calculate the Equivalent Uniform Annual Worth ($EUAW$): $$EUAW = A_{savings} - CR = 12,000\text{ USD/yr} - 10,440.9\text{ USD/yr} = +1,559.1\text{ USD/yr} = 1,560\text{ USD/yr}$$ Distractor Analysis: - Option A: Uses straight-line depreciation without compound interest. - Option B: Correct. - Option C: Uses 10 years useful life. - Option D: Ignores capital recovery cost and reports nominal net cash flow.

Find out where you actually stand

A free 20-question diagnostic across every FE Mechanical knowledge area, scored in the real exam interface. You get a projected score and the areas costing you the most — so you know whether Engineering Economics is where your time should go at all.

Start the free Mechanical diagnostic

Retaking the FE Mechanical exam?

Copy the scores from your NCEES diagnostic report and see whether Engineering Economics is where your next attempt gains the most points, or whether another area deserves the time first.

Analyze my diagnostic report

Other FE Mechanical knowledge areas

Engineering Economics on other FE exams

The same knowledge area is weighted differently on each exam, and the questions differ with it.